APC PowerShield UNIV IN 24W/12VDC OUT Euro 4 Signal Output

POWERSHIELD UNIV IN 24W/12VDC OUT EURO 4 SIGNAL OUTPUT
Part Number : CP24U12S
Product Distribution : Africa , Eastern Europe, Middle East, Western Europe

Product Overview

Description

APC PowerShield, 24VA/24W, Input 125/250V/ Output 12V, Interface Port Contact Closure

General Features

Advanced Battery Monitoring, Alarms, Extendable Run Time , Hot Swap Batteries, Low voltage disconnect, Replace Batt Indicator , Status Indicator LED's, Universal input voltage range, User Replaceable batteries

Technical Specifications

Input

Nominal input voltage

125/250 V

Input frequency

50/60 Hz +/- 3 Hz (auto sensing)

Input Connection Type

Schuko CEE 7 / EU1-16P

Cord Length

6 feet

Batteries

Typical backup time
at half load

426.6 minutes (12 Watts)

Typical backup time
at full load

196.6 minutes (24 Watts)

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time **

16 hour(s)

Replacement battery cartridge

(1) UPS Battery Replacement

Physical

Maximum height dimensions

7.50 inches ( 19.05 cm)

Maximum width dimensions

9.50 inches ( 24.13 cm)

Maximum depth dimensions

3.10 inches ( 7.87 cm)

Net weight

7.00 lbs ( 3.18 kg)

Shipping Weight

7.50 lbs ( 3.41 kg)

Shipping Height

14.00 inches ( 35.56 cm)

Shipping Width

14.00 inches ( 35.56 cm)

Shipping Depth

5.00 inches ( 12.70 cm)

Color

Beige

Communications & Management

Interface port

Contact Closure

Environmental

Operating Environment

0 - 45 °C (32 - 113°F)

Operating Relative Humidity

0 - 95%

Operating Elevation

0-10000 feet (0-3000 m)

Storage Temperature

-15 - 45 °C (5 - 113°F)

Storage Relative Humidity

0 - 95%

Storage Elevation

0-50000 feet (0-15000 m)

Audible noise at 1 meter from surface of unit

0 dBA

Conformance

Approvals

CE, CSA 22.2 No. 950, EN 60950, EN 55022 Class B, EN 55024, FCC Part 15 Class B, UL 1950, UL Listed

Standard warranty

2 years repair or replace

** The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.