Features & Benefits
|
Convenience
|
| Wall-mountable |
Four "key hole" slots spaced 16" apart on the rear door allow the enclosure to mount directly to building walls. A template is provided to assist in locating the proper hole placement. |
| Multi-purpose mounting rails |
NetShelter WX Enclosures ships with the front vertical mounting rails oriented such that #12-24 tapped holes are useable for mounting equipment. The front rails are also field-reversible to provide square mounting holes for use with caged nuts. |
| Adjustable front rail |
The front mounting rails can be adjusted to allow for various mounting depths and to allow for additional clearance from the front door. |
| Labeled U positions |
APC has eliminated the pain involved in determining where to install rack-mount devices within an enclosure by labeling each vertical mounting rail with the actual U positions. |
| Unit symmetry |
Left or right hand door swing operation can be obtained depending on orientation selected upon installation. |
| Integrated cable access holes |
Eight 2-inch cable access holes are located at the top, sides, and bottom of the rear door for ample cabling provisions. Grommets and caps are included. |
| Rubber feet |
Four rubber feet are provided for optional floor mounting. |
| |
Serviceability
|
| Double-hinged design |
Provides front and rear access to installed equipment. |
| |
Availability
|
| Ventilated |
Front Doors and Side Panels are perforated to provide ventilation for components typically installed. Fully ventilated and partially ventilated front doors are available. |
| |
Protection
|
| Lockable Doors |
All NetShelter WX Enclosures include key lockable front doors to prevented unwanted access. |
| |
APC Home
Bomara Homepage