 |
| General Information
|
|
| Current
Version |
|
| PowerNet Manager v.1.0
for HP OpenView WNM |
|
|
| Hardware
Requirements |
|
| UPS Model |
APC Smart-UPS, Matrix-UPS, and Symmetra Power Array |
|
| UPS Network Card |
APC Web/SNMP
Management Card for 10 BaseT Ethernet
APC SNMP Management Card for Token Ring |
|
| MeasureUPS |
Optional - required when Environmental
Management is necessary |
|
| Communications |
SNMP running on TCP/IP |
|
|
| Software
Requirements |
|
| Operating System |
Windows 95/98
Windows NT v.4.0 |
|
| Network Management
Platform |
HP
OpenView WNM v.7.2 |
|
| For Windows NT v.4.0
& NetWare 4.11 & 5.0 servers, ships as part
of PowerChute plus |
Optional - APC PowerChute SNMP
agent |
|
|
| Availability |
|
| All standard
distribution channels |
AP9402, PowerNet Manager for HP
OpenView |
|
|
|
| User
Interface |
|
| PowerNet Manager |
Full featured
UPS management. All UPS and MeasureUPS information
available at a glance in graphical
format |
|
| APC UPS icons on network map |
UPS status
information available at a glance as icons change
color to indicate state change |
|
|
| UPS
Administration |
|
| UPS Operating Parameters |
Full
configuration of UPS transfer points and
sensitivity to power fluctuations |
|
| UPS Identification Parameters |
View UPS model
number, Firmware Revision, Date Manufactured,
Serial number, configurable names of attached
devices |
|
| SNMP Agent Parameters |
View
configurable System Name, System Location, System
Contact and up to 4 Trap Receivers |
|
| Site specific notes |
Allows
administrator to write notes and observations on
UPS |
|
| Put UPS to sleep |
Turn UPS off
for configurable time. When activated, UPS turns
off for configured time or restarts when power
returns |
|
|
| Diagnostics |
|
| Predictive failure analysis |
The UPS
conducts regular internal self-tests. When a
potential problem is detected, like the need for a
replacement battery, a notification is sent to the
relevant administrators and users before the
problem arises. This allows an administrator to be
proactive in maintenance. |
|
| UPS Self-test |
Initiate self
test of remote UPSs to maximize UPS
uptime |
|
| Activate UPS Alarm |
Test whether
UPS Alarm is active |
|
| SNMP trap based events logged in
HP OpenView |
Records power
events with a description to enable diagnosis of
UPS/power problems. |
|
| UPS Runtime Calibration |
Initiate
runtime calculation of remote UPS to maintain
accurate runtime values. |
|
|
| Event
Handling |
|
| Over 70 SNMP trap based events
reported |
For each of
the over 70 power or environmental events, the
administrator can configure HP OpenView to e-mail
or page or take other necessary actions |
|
|
| Shutdown/Reboot |
|
| Reboot Load |
Reboot hung
equipment that is connected to UPS |
|
| Turn off UPS |
Shuts off
power to connected equipment. Excellent for
situations where construction or maintenance is
scheduled in a facility |
|
| Safe System Shutdown |
Shutdown the
OS safely (PowerChute SNMP Agent
required) |
|
|
| Recommended
Applications |
|
| All APC UPSs
protecting computer and network devices in an
enterprise network that have to be managed via SNMP
from HP OpenView |
|
|
APC Home
Bomara Homepage