Rack Air Removal Unit

(120v and 208/230v models)

Rack Air Removal Unit

Heat Removal for High-Density Enclosures.

Product Information
> Model Information
> Features & Benefits

The only manageable rack heat removal solution.

Densely packed enclosures can overheat IT equipment and cause downtime. High-density enclosures create an environment where traditional air distribution methods are not effective.

The Air Removal Unit captures exhaust heat, ducting it to the return air plenum and eliminating hot spots. Through automatic fan speed adjustment based on temperature or power consumption, a desired temperature can be set and fans will self-adjust for optimal energy efficiency.

The Rack Air Removal Unit provides fan redundancy in the event of fan failure, and power redundancy through dual corded input. This space saving product mounts to the back of the enclosure - requiring zero U space.

Features & Benefits
Availability
Redundant fans	In the event of fan failure, redundant fans will provide increased airflow.
Power/temperature controlled fans	Provides two methods for controlling the amount of heat removal from the rack enclosure.

Agility
Mounting frame	Allows unit to be installed on the rear of the rack, leaving valuable rack space for other equipment.
Fan guards	A safety measure that provides protection from the fan opening by covering the inlet.

Total Cost of Ownership
Dual A-B power inputs	Draws power from the UPS for power protection with dual feeds for redundancy.

Manageability
LED status indicators	Indicates the operating condition of the unit including power-on and alarm-state.
Communications link	Allows for aggregated status and alarm information through one point. Connects up to eight units together for monitoring and control.

Bomara Homepage

Request Information

Bomara Associates Phone: 800.5BOMARA (800.526.6272) Phone: 978.452.2299 Fax: 978.452.1169 3 Courthouse Lane, Chelmsford, MA 01824 USA
email: bobr@bomara.com web: www.bomara.com