GarrettCom » Switches » 6K Family » 6K32T

 GarrettCom Magnum 6K32T & 6K32TR: High-Port Density Managed Gigabit Ethernet Switch


Magnum 6K32T High-Port Density Managed Gigabit Ethernet Switch

Quick Facts:

  • -48VDC
  • +24VDC
  • +125VDC
  • PoE Port Modules
  • AC for US and International Voltages
  • Rugged, Hardened, Industrial
  • Extended Temperature Range
  • NEBS Compliant



Description:

The Magnum™ 6K32T and 6K32TR (Reverse Model) Managed Switches offer up to 32-ports in a 1U rack-mount package, ideal for heavy duty Carrier Class and Industrial applications that require high port density to save in cost and rack space. The 6K32T and 6K32TR provide 16 fixed 10/100 Mb copper ports plus two configuration slots. The modular slots provide the flexibility to configure up to sixteen 100 Mb fiber ports, and/or some 10 Mb fiber ports, and/or one to four Gigabit ports, or some more copper ports. Standard GBIC ports can be configured for a variety of Gigabit fiber cabling types and distances.






Magnum 6K32T & 6K32TR Ordering Information:

Base units Description
6K32T Magnum 6K32T Managed Switch, base unit with 16 fixed 10/100 copper ports and two port module slots.  Wire speed filtering and forwarding across all ports, 802.3x flow control, 802.1p priority packet processing, self-learning 4K-node address table, large 240KB packet buffers for 10/100 and 120KB for 1000Mb.
6K32TR "Reverse" model, same as Model 6K32T except user ports and the power input connectors are in the rear. Two sets of LEDs (both rear and front) provide duplicate status data for viewing from either side.
6K32T-24VDC Magnum 6K32T 24VDC Managed Switch, base unit with 16 fixed 10/100 copper ports and two port module slots.  Wire speed filtering and forwarding across all ports, 802.3x flow control, 802.1p priority packet processing, self-learning 4K-node address table, large 240KB packet buffers for 10/100 and 120KB for 1000Mb.
6K32T-48VDC Magnum 6K32T 48VDC Managed Switch, base unit with 16 fixed 10/100 copper ports and two port module slots.  Wire speed filtering and forwarding across all ports, 802.3x flow control, 802.1p priority packet processing, self-learning 4K-node address table, large 240KB packet buffers for 10/100 and 120KB for 1000Mb.
6K32T-125VDC Magnum 6K32T 125VDC Managed Switch, base unit with 16 fixed 10/100 copper ports and two port module slots.  Wire speed filtering and forwarding across all ports, 802.3x flow control, 802.1p priority packet processing, self-learning 4K-node address table, large 240KB packet buffers for 10/100 and 120KB for 1000Mb.
ALARM TERMBLK Alarm Contacts, Two NC Form C, 1 for PWR and 1 software controlled.
Port Modules
6KP8-RJ45 TP module for 6K25 switches, w/ 8 10/100Mb auto-negotiating RJ-45 ports
6KP8-MTRJ SFF Fiber module for 6K25 switches, w/8 100Mb multi-mode FX MT-RJ connectors
6KP8-MLC SFF Fiber module for 6K25 switches, w/8 100Mb multi-mode FX LC connectors
6KP8-SLC SFF Fiber module for 6K25 switches, w/8 100Mb single-mode FX LC connectors
6KP4-FXSC "2+2" 100Mb Fiber module for 6K25 switches, w/four 100 Mb 2km FX SC connectors
6KP4-FXSSC "2+2" 100Mb Fiber module for Magnum 6K switches, with four 100Mb 20km FX SC connectors
6KP4-FXST "2+2" 100Mb Fiber module for 6K25 switches, w/four 100 Mb 2km FX ST connectors
6KP4-F10ST "2+2" 10Mb Fiber module for 6K25 switches, w/four 10 Mb 2km FL ST connectors
6KP4-FLSTFX "2+2" ST Fiber module for 6K25 switches, w/two 10 Mb FL and two 100Mb FX Ports
6KP7-1GSFP6RJ "G+6" module for 6Ks, w/one SFP Gigabit Port and six 10/100 Mb RJ45 ports
6KP7-1G2RJ4MLC "G+4+2" module for 6Ks, w/one SFP Gigabit Port, four multi-mode LC fiber ports, and two 10/100 RJ-45
6KP7-1G2RJ4SLC "G+4+2" module for 6Ks, w/one SFP Gb Port, four sgl-mode long-haul LC fiber ports, and two 10/100 RJ-45
6KP8-45-2MT "6+2" module for 6K25 Switches, w/6 10/100 RJ-45 and 2 100Mb 2km mm  MTRJ connectors
6KP8-45-2SLC "6+2" module for 6K25 Switches, w/6 10/100 RJ-45 and 2 100Mb 15km sgl.m  FX LC connectors
6KP8-45MT "4+4" module for 6K25s, w/four 10/100 RJ-45 and four 100Mb 2km mm FX MTRJ connectors
6KP8-45MLC "4+4" module for 6K25s, w/four 10/100 RJ-45 and four 100Mb 2km mm FX LC connectors
6KP8-45SLC "4+4" module for 6K25s, w/four 10/100 RJ-45 and four 100Mb 20km sgl.m FX LC connectors
6KP6RC-RJSSCL "4+2" module for Magnum 6K switches, with four 10/100 RJ45 and two 100Mb 40km single-mode FX SC connectors
6KP6RC-RJSSC "4+2" module for Magnum 6K switches, with four 10/100 RJ45 and two 100Mb 20km single-mode FX SC connectors
6KP6RC-RJMST "4+2" module for Magnum 6K switches, with four 10/100 RJ45 and two 100Mb 2km multi-mode FX ST connectors
6KP6RC-RJMSC "4+2" module for Magnum 6K switches, with four 10/100 RJ45 and two 100Mb 2km multi-mode FX SC connectors.
6KP6RC-RJ10ST "4+2" module for Magnum 6K Switches, with four 10/100 RJ45 and two 10 Mb 2km FL ST connectors
6KP6-RJMST "4+2" module for 6K25s, w/four 10/100 RJ-45 and two 100Mb 2km mm FX ST connectors
6KP6-RJMSC "4+2" module for 6K25s, w/four 10/100 RJ-45 and two 100Mb 2km mm FX SC connectors
6KP6-RJSSC "4+2" module for 6K25s, w/four 10/100 RJ-45 and two 100Mb 20km sgl.m FX SC connectors
6KP6-RJSSCL "4+2" module for 6K25s, w/four 10/100 RJ-45 and two 100Mb 40km sgl.m FX SC connectors
6KP6-MT10ST "4+2" module for 6K25s, w/four 100Mb MTRJ fiber and two 10Mb 2km  FL ST connectors
6KP6-RJ10ST "4+2" module for 6K25s, w/four 10/100Mb RJ-45 and two 10Mb 2km  FL ST connectors
Modules Using GBICs
6KP5-G4RJ "G+4" module for 6K32T Switches, uses one 6K slot and provides one GBIC open transceiver port for a user-selectable GBIC Transceiver module, plus 4 10/100Mb copper ports. Includes front-panel sheet metal cover.
6KP3-G2SC "G+2" module for 6K32T Switches, uses one 6K slot and provides one GBIC open transceiver port for a user-selectable GBIC Transceiver module, plus 2 10/100Mb FX SC fiber ports. Includes front-panel sheet metal cover.
GBPM-2OTX Two-port one-slot Gigabit 6K module for 6K32T switches, uses one 6K slot and provides two GBIC open transceiver ports for user-selectable GBIC Transceiver modules.  Includes front-panel sheet metal cover.
GBPM-COTX One A, B, or C-Slot Gigabit 6K module for 6K25 switches, uses one 6K slot and provides one GBIC open transceiver port for a user-selectable GBIC Transceiver module.  Same as GBPM-DOTX D-slot but includes A, B, C-sized front-panel sheet metal cover.
GBIC-SXSC GBIC Transceiver module for use in GBPM-OTX, one SX port with mm SC fiber connector.
GBIC-SXSC-H GBIC Transceiver module for use in GBPM-xOTX, one SX port with multi-mode SC fiber connector.
GBIC-LXSC10 GBIC Transceiver module for use in GBPM-OTX, one 1000Base-LX/LH port with 1310nm,sgl.m SC fiber connector. 10Km.
GBIC-LXSC10-H GBIC Transceiver module for use in GBPM-xOTX, one 1000BASE-LX/LH port 1310nm,single-mode SC 10Km.
GBIC-LXSC25 GBIC Transceiver module for use in GBPM-OTX, one 1000Base-LX/LH port with 1310nm,sgl.m SC fiber connector. 25Km.
GBIC-LXSC25-H GBIC Transceiver module for use in GBPM-xOTX, one 1000BASE-LX/LH port 1310nm,single-mode SC 25Km.
GBIC-LXSC40 GBIC Transceiver module for use in GBPM-OTX, one 1000Base-ZX port with 1550nm,sgl.m SC fiber connector. 40Km.
GBIC-LXSC70 GBIC Transceiver module for use in GBPM-OTX, one 1000Base-ZX  port with 1550nm,sgl.m SC fiber connector. 70Km.
GBIC-ZXSC70 GBIC Transceiver Module for use in GBPM-Xotx, one 1000BASE-ZX port 1550nm,sgl.m SC 120Km
GBIC-TP GBIC Transceiver module for use in GBPM-xOTX, one 802.3ab 1000Base-T Port, RJ-45 Connector
Modules with Gb, not using GBICs
6KP1V-1GCU One-port one-slot Gigabit 6K module for 6K16V / 6K8 switches, uses 1 slot and provides 1 copper (1000BASE-T) auto-negotiating Gb port.
6KP1V-1GSFP One-port one-slot Gigabit 6K module for 6K16V / 6K8 switches, uses 1 slot and provides 1 Gb SFP open transceiver port.
6KP2C-2GCU Two-port one-slot Gigabit 6K module for Magnum 6K switches, uses one 6K slot and provides two Gigabit Copper (1000BASE-T) auto-negotiating ports. Includes front-panel sheet metal cover.
6KP2C-2GSFP Two-port one-slot Gigabit 6K module for Magnum 6K switches, uses 1 slot and provides two Gb SFP open transceiver ports.
6KP2-2GSX Two-port one-slot Gigabit 6K module for 6K32T switches, uses one 6K slot and provides two Gigabit Fiber SXSC(1000Base-SX multi-mode) ports. Includes front-panel sheet metal cover.
6KP2-2GCU Two-port one-slot Gigabit 6K module for 6K32T switches, uses one 6K slot and provides two Gigabit Copper(1000Base-T)auto-negotiating ports. Includes front-panel sheet metal cover.
6KP5-1CU4RJ Five-port one-slot Gigabit 6K module for 6K32T switches, uses one 6K slot and provides two Gigabit Copper(1000Base-T)auto-negotiating ports & four 10/100 RJ-45 ports. Includes front-panel sheet metal cover.
6KP5-1CU4MT Five-port one-slot Gigabit 6K module for 6K32T switches, uses one 6K slot and provides two Gigabit Copper(1000Base-T)auto-negotiating ports & four 100 MTRJ Fiber FX multi-mode ports. Includes front-panel sheet metal cover.
6KP3-1CU2FXT Three-port one-slot Gigabit 6k module for 6K32T switches, uses one 6K slot and provides one Gigabit Copper (1000Base-T) auto-negotiating port and two 100Mb ST Fiber FX multi-mode ports. Includes front-panel sheet metal cover.
6KP7-1G2RJ4MT 1 Gb SFP + 2 TP and 4 MLC fiber module for 6K "V" switches. Provides one SFP open transceiver port for a user-selectable SFP Transceiver module and two 10/100Mb auto-negotiating auto-cross RJ-45 ports and four 100Mb 2km mm FX LC ports. Includes front-panel sheet metal cover.
6KP7R-1G2RJ4MLC 1 Gb SFP + 2 TP and 4 MLC fiber module for 6K "V" switches. Provides one SFP open transceiver port for a user-selectable SFP Transceiver module and two 10/100Mb auto-negotiating auto-cross RJ-45 ports and four 100Mb 2km mm FX LC ports. Includes front-panel sheet metal cover.
6KP7V-1G2RJ4MT 1 Gb SFP + 2 TP and 4 MTRJ fiber module for 6K switches. Provides one SFP open transceiver port for a user-selectable SFP Transceiver module and two 10/100Mb auto-negotiating auto-cross RJ-45 ports and four 100Mb 2km mm FX LC ports. Includes front-panel sheet metal cover.
6KP7V-1G2RJ4SLC 1 Gb SFP + 2 TP and 4 SLC fiber module for 6K "V"switches. Provides one SFP open transceiver port for a user-selectable SFP Transceiver module and two 10/100Mb auto-negotiating auto-cross RJ-45 ports and four 100Mb 20km single-mode FX LC ports. Includes front-panel sheet metal cover.
6KP7V-1G2RJ4SLCL 1 Gb SFP + 2 TP and 4 SLCL fiber module for 6K "V" switches. Provides one SFP open transceiver port for a user-selectable SFP Transceiver module and two 10/100Mb auto-negotiating auto-cross RJ-45 ports and four 100Mb 40km single-mode long-reach FX LC port. Includes front-panel sheet metal cover.
6KP7V-1GSFP6RJ 1 Gb SFP + 6 TP module for 6K "V" switches, provides one SFP open transceiver port for a user-selectable SFP Transceiver module and six 10/100Mb auto-negotiating auto-cross RJ-45 ports. Includes front-panel sheet metal cover.
6KM-BLNK Blank Cover for one module slot opening in a Magnum 6K32T chassis



Magnum 6K32T & 6K32TR Specifications:


PERFORMANCE:

RJ-45 Ports: 100 or 10 Mb speed, full- or half-duplex mode, per port,
individually determined.10/100 auto-negotiating & auto-cross, 32 ports max.
Gigabit Ports, 1000 Mb: Configurable, std. See selection of modules.
Fiber Ports, 100 Mb (multi-mode and single-mode): Configurable in the module, SFF (Small Form Factor) featured for high fiber port density, up to 8 total per module, each FDX or HDX, default is FDX mode
Fiber Ports, 10 Mb: Configurable, up to 4 ST ports max. per module, multimode or single-mode. Each port may be FDX or HDX, default is HDX
All Ports non-blocking:

Processing type: Store and Forward with IEEE 802.3x full-duplex flow control
System aggregate forward and filter rate: 8.3Mpps (16 ports @ 100Mb speedFDX and 4 ports @ Gb speed FDX)
Address table: 4K nodes, self-learning, with address aging
Packet buffers: 480KB + 120KB for 1000 Mb
Latency: 6μs + packet time max (TX - TX, TX - FX, FX - FX, TX-G, G-G)


NETWORK STANDARDS
:

IEEE 802.3z, 802.3ab, 802.1p: 100BASE-TX, -FX, 1000BASE-SX, -LX
Auto-negotiation and auto-crossover on TP, IEEE 802.3u
See MNS-6K datasheet for software network standards, network security,
redundant LANs management, and other software features.


OPERATING ENVIRONMENT
:

IEC 60068 Operating temp. per “Type Test” -40° to 185°F (-40° to 85°C)
UL 60950 “Component Parts” temperature rating: 130°F (55°C)
Storage: -40° to 185°F (-40°to 85°C),
Ambient relative humidity: 5% to 95% (non-condensing)
Altitude: -200 to 13000ft (-60 to 4000m)
Conformal coating (humidity protection) option: Request quote


RELAY CONTACTS FOR ALARMS (OPTIONAL)
:

Form C, one NC indicating internal power, one NC software controllable.


NETWORK CABLE CONNECTORS
:

1000 Mb ports: standard GBICs supported, see modules description
100 Mb Copper: Category 5 UTP/STP; 10 Mb: Cat. 3,4, 5 UTP/STP
100 Mb Fiber ports connector options: multi-mode FX-MTRJ, LC, ST, SC; single-mode LC, 20Km SC, and 40Km “long reach” single-mode SC.
10 Mb Fiber port connector: multi-mode and single-mode ST


POWER SUPPLY (INTERNAL)
:

AC Power Connector: IEC-type, male recessed, ON/OFF switch (optional)
Power Input, AC: 100 to 240 VAC, 47 to 63 Hz (auto ranging)
Power Consumption: 45 watts typical with two fully-loaded fiber modules, 30 watts typical for a copper-only 24-port model.


DC POWER SUPPLY OPTIONS
:

-48VDC: Input -36 to -70VDC (PoE input range: -44 to -57VDC)
24VDC: Input 20 to 40VDC
125VDC, 250VDC, and 110VDC nominal: Input 88 to 300VDC
Std. Terminal Block: “-, GND, +”, Power Consumption: Same as AC


DC DUAL POWER SOURCE (OPTIONAL)
:

Magnum 6K32T and 6K32TR models may be ordered with optional Dual DC power input, for continuity of operation when either one of the DC input sources is interrupted. Available for -48V, 24V, 125V, or 250V.


DUAL POWER SUPPLIES (OPTIONAL)
:

Magnum 6K32FC models with 125VDC, 250VDC and 110VDC nominal power input may be ordered with Dual Power Supplies, load-sharing with software monitoring, for continuity of operation when either one of the two power supplies or their associated power input is inoperative.


MECHANICAL
:

Enclosure: Rugged high-strength sheet metal. Suitable for 1U rack mounting or stand-alone.
Rack-mounting brackets: 19" included; ETSI and 23" Telco optional.
Cooling Method: Fan cooled, internal @ 25cfm
Dimensions: 1.70inHx17.0inWx9.0inD (4.32cmHx 43.2cmW x 22.9cmD)
Weight: rack-mount 5.0 lbs. (2.0 kg)


LED INDICATORS PER RJ-45 PORT:

LK: On when twisted-pair link is operational.
ACT: Blinking with port activity. LK and ACT combined on fixed ports.
FDX/HDX: ON = full-duplex mode, OFF = half-duplex mode.
100/10 ON = 100Mb speed, OFF = 10Mb


LED INDICATORS, 100 Mb and 10 Mb FIBER PORTS:

LK: Steady on when fiber link is operational.
ACT: On with port activity, FDX/HDX


PORT-SPECIFIC SETTINGS
:

Port-specific user settings (such as FDX or HDX, and copper 10/100 speed) can be set using software commands. The RJ-45 copper ports are auto-negotiating and auto-crossover, there are no user controls for auto-crossover.


AGENCY APPROVALS AND STANDARDS COMPLIANCE
:

UL Listed (UL60950), cUL, CE, Emissions meet FCC Part 15, Class A
IEC61850 EMC and Operating Conditions Class C for Power Substations
IEEE 1613 Class 2 Environmental Std for Electric Power Substations
NEBS Level 3 and ETSI Compliant; NEMA TS-2 for traffic control
EN50155 Compliant; DNV certified


WARRANTY
:

Three years

 



Magnum 6K32T & 6K32TR Configuration Guide:

Magnum 6K32 Managed Switch, base unit with 24 fixed 10/100 copper ports and one port module slot. The module slot may be configured with any 10/100/1000 6K fiber and copper port connector types, 32 ports max. Wire speed filtering and forwarding across all ports, 802.3x flow control, 802.1p priority packet processing, self learning 4K-node address table, 240KB packet buffers. 19" rack-mounting brackets included.

Step 1. Choose 6K32 chassis and power input type
6K32T Rack-mount with AC Power
6K32T-24 VDC Rack-mount with 24V (18-36) DC power
6K32T-48 VDC Rack-mount with -48V (36-70) DC power
6K32T-125 VDC Rack-mount with 125V (88-300) DC power
6K32T-250 VDC Rack-mount with 250V (88-300) DC power
Reverse:
6K32T Rack-mount with AC Power
6K32T-24 VDC Rack-mount with 24V (18-36) DC power
6K32T-48 VDC Rack-mount with -48V (36-70) DC power
6K32T-125 VDC Rack-mount with 125V (88-300) DC power
6K32T-250 VDC Rack-mount with 250V (88-300) DC power
Step 2. Choose 1 module for slot A (may be blank)
Module Model# 10/100 10BASE-FL 100BASE-FX (MM) 100BASE-FX (SM) Gigabit
6KP8-RJ45 8        
6KP8-45-2MT 6   2 (MTRJ)    
6KP8-45-2SLC 6     2 (15km LC)  
6KP8-RJ10ST 4 2(ST)      
6KP8-RJMST 4   2(ST)    
6KP8-RJMSC 4   2(SC)    
6KP8-RJSSC 4     2 (20km SC)  
6KP8-RJSSCL 4     2 (40km SC)  
6KP8-45MT 4   4(MTRJ)    
6KP8-45MLC 4   4(LC)    
6KP8-45SLC 4     4(15km LC)  
6KP4-F10ST   4(ST)      
6KP4-FLSTFX   2(ST) 2(ST)    
6KP4-FXST     4(ST)    
6KP4-FXSC     4(SC)    
6KP6-MT10ST   2(ST) 4(MTRJ)    
6KP8-MTRJ     8(MTRJ)    
6KP8-MLC     8(LC)    
6KP8-SLC       8(15km LC)  
6KP5-G4RJ 4       1
6KP3-G2SC     2(SC)   1
GBPM-COTX         1
GBPM-2OTX         2
Step 3 (Optional). Choose GBICs for Gigabit Ports for slot A
Model # Description (Ports for GBPM-COTX / 6KP5-G4RJ / 6KP3-G2SC)
GBIC-LXSC10 One 1000BASE-LX/LH port 1310n/m single-mode SC 10Km
GBIC-LXSC25 One 1000BASE-LX/LH port 1310n/m single-mode SC 25Km
GBIC-SXSC One SX port with multi-mode SC fiber connector
GBIC-TP One IEEE 802.3ab TP port, RJ-45 connector
GBIC-ZXSC40 One 1000BASE-ZX port 1550nm single-mode SC 40 Km
GBIC-ZXSC70 One 1000BASE-ZX port 1550nm single-mode SC 70Km
Note: MNS-6K software license is included with Basic Unit.
The software is loaded in the 6K32 at the factory.
Step 4. Choose option and extras
Model # Description
6KM-BLNK Blank cover for one (A) module slot
DUAL-SRC Two separate power inputs (24/ 48/ or 125V)
ALARM TERMBLK Alarm contacts, 1 power and 1 software
S-RING KEY Software, self-healing ring management
RMB-23W 23" 'Telco' rack-mount kit (1U)
RMB-ETSI ETSI rack-mount kit (1U)
CONSOLE CBL Console attachment cable serial null Modem (aka X-modem) cable with DB9 connectors
Console USB As above, but with a USB connector
CONFORMAL CR Conformal coating – request quote


Magnum PoE Configuration Guide:

Magnum 6K PoE (Power over Ethernet) Port Modules are available with a.) 48VDC Power Pass-Through for configuring in 6K Switches having -48VDC power input, or b.) Power Inside for configuring in full rack-width 6K Switches having AC or 125VDC power input. One PoE module may be configured in one of the chassis slots.

 a.) If configuring in 6K switches having -48VDC, choose a PoE Port Module from the chart below. Note that part numbers for the 6K8 and 6K16V switches begin with P6KP8V, while part numbers for all other 6K switches begin with P6KP8.

Model number for all 6K switches except 6K8 and 6K16V Model number for 6K8 and 6K16V switches 10/100 10BASE-FL 100BASE-FX (MM) 100BASE-FX (SM) PoE Ports
P6KP8-RJ45 P6KP8V-RJ45 8       8
P6KP8-45-2MT P6KP8V-45-2MT 6   2 (MTRJ)   4
P6KP8-45-2SLC P6KP8V-45-2SLC 6     2 (15km LC) 4
P6KP8-RJ10ST P6KP8V-RJ10ST 4 2 (ST)     4
P6KP8-RJMST P6KP8V-RJMST 4   2 (ST)   4
P6KP8-RJMSC P6KP8V-RJMSC 4   2 (SC)   4
P6KP8-RJSSC P6KP8V-RJSSC 4     2 (20km SC) 4
P6KP8-RJSSCL P6KP8V-RJSSCL 4     2 (40km SC) 4
P6KP8-45RJ P6KP8V-45RJ 8       4
P6KP8-45MT P6KP8V-45MT 4   4 (MTRJ)   4
P6KP8-45MLC P6KP8V-45MLC 4   4 (LC)   4
P6KP4-45SLC P6KP4V-45SLC 4     4 (15km LC) 4


 b.) If configuring in full rack-width 6K switches having AC or 125VDC input only...

1) Choose a power-inside power supply to provide power for the PoE module. Both supplies mount inside a full rack-width 6K switch (6K32T, 6K32TR, 6K32TRC, 6K25, 6K25R) and provide 60 watts of power for 4 PoE ports.
6KAC-PoE-PS For 6K switches configured for AC power input
6K125VDC-PoE-PS For 6K switches configured for 125VDC power input
2) Choose a PoE port module from the chart below.
Model number 10/100 10BASE-FL 100BASE-FX (MM) 100BASE-FX (SM) PoE Ports
PI6KP-45-2MT 6   2 (MTRJ)   4
PI6KP8-45-2SLC 6     2 (15km LC) 4
PI6KP6-RJ10ST 4 2 (ST)     4
PI6KP6-RJMST 4   2 (ST)   4
PI6KP6-RJMSC 4   2 (SC)   4
PI6KP6-RJSSC 4      2 (20km SC) 4
PI6KP6-RJSSCL 4     2 (40km SC) 4
PI6KP8-45RJ 8       4
PI6KP8-45MT 4   4 (MTRJ)   4
PI6KP8-45MLC 4   4 (LC)   4
PI6KP8-45SLC 4     4 (15km LC) 4




Magnum 6K32T & 6K32TR Full Description:

The Magnum™ 6K32T and 6K32TR (Reverse Model) Managed Switches offer up to 32-ports in a 1U rack-mount package, ideal for heavy duty Carrier Class and Industrial applications that require high port density to save in cost and rack space. The 6K32T and 6K32TR provide 16 fixed 10/100 Mb copper ports plus two configuration slots. The modular slots provide the flexibility to configure up to sixteen 100 Mb fiber ports, and/or some 10 Mb fiber ports, and/or one to four Gigabit ports, or some more copper ports. Standard GBIC ports can be configured for a variety of Gigabit fiber cabling types and distances.

Magnum 6K32T and 6K32TR Managed Switches come with LAN software support including SNMP management, SNMPc andOpenviewfor Windows, Secure Web Management, redundant LANs support, and many network management security and easeof-use features. See the Managed Networks Software (MNS 6K) datasheet for additional details on the comprehensive set of software packages and options that are used across the Magnum 6K Switches family of products.

High performance hardware features include non-blocking wire speed on all ports and 802.1p QoS Traffic Prioritization. Magnum 6K32Ts and 6K32TRs are “plug-and-play” ready for use as backbone switches where a mix of busty data traffic and priority streaming traffic for VoIP and audio/video applications is present. Fan cooling provides long operating life and increased system availability.

Magnum 6K32Ts and 6K32TRs are ideal for building a switched network infrastructure when used in applications connected to communications computers, routers, hubs, or other switches. Designed for use in Carrier Ethernet and Industrial networks with segments requiring multiple Gigabit backbone interconnections among network centers, the switches are easy to install and operate. Addresses of attached nodes are automatically learned and maintained, adapting the switching services to network changes and expansions to provide plug-and-play operation. Magnum 6K32T and 6K32TR Managed Switches have rugged metal cases and auto-ranging power supplies for operation with standard AC power worldwide. Internal DC power supplies are optional. The 6K switches and all other Magnum products are designed and manufactured in the USA with a three year warranty.


Magnum 6K32T & 6K32TR Features:

  • Layer 2 managed configurable ethernet switch
  • The 6K32T and the 6K32TR (Reverse model with ports and power supply in the rear, LEDs in the front) provide 16 fixed copper ports, and two modular slots for configuration flexibility of up to 32 total ports
  • The 6K32T and 6K32TR are rugged managed gigabit Ethernet switches
  • Dense 1U rack-mount package, NEBS compliant member of Magnum 6K family
  • Modular slot for combinations of 100Mb, 10 Mb, Gigabit, and more 10/100 copper ports
  • Non-blocking wire speed performance on all ports, 802.1p QoS prioritization
  • Comprehensive Magnum MNS-6K software includes: RMON, SNMP, Telnet, IGMP, VLANs (Port-based and Tag-based), GVRP, Port-mirroring, CLI, Secure Web Management, Password Security, Port Security, SNTP, Event Log, BootP, DHCP
  • IGMP Snooping with Multicast Message Filtering or Pruning
  • Manages redundant rings with the S-Ring™ software product, Spanning Tree Protocol (STP) and RSTP
  • Options include -48VDC, 24VDC, 125VDC power, dual source, or AC, "reverse" rack mount, ETSI and 23" Telco brackets
  • Meets IEEE P1613 and IEC 61850-3 Environmental Standard for Electric Power Substations



Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized