GarrettCom » Switches » 6K Family » 6KL

 GarrettCom Magnum 6KL: Industrial Ethernet Managed Edge Switches


Magnum 6KL Industrial Ethernet

Available in the following DC Volts:

  • 12VDC
  • -48VDC
  • +24VDC
  • +125VDC
  • 250VDC
"Configurability at the Edge"
  • Optional Dual Source External Universal AC power supply
  • NEBS L3 Compliant
  • PoE Port Modules



Description:

Magnum™ 6KL Managed Edge Switches incorporate the latest in reliability and security for harsh environments, especially “edge” applications on the periphery of the network where industrial devices are connected. The high performance 6KL base unit comes with four 10/100 copper ports (either regular or PoE). Up to four (4) 100Mb fiber ports or up to four more 10/100 copper ports, or combinations, may also be configured. Two Gb ports may be configured as SFP fiber ports or as 10/100/1000 copper ports.






Magnum 6KL Ordering Information:

Products Description
6KL-24VDCDC Magnum 6KL Managed Edge Switch, base unit with four 10/100 copper ports in slot A. Up to 4 100Mb fiber ports or up to four more 10/100 copper ports (or combinations) may also be configured, and up to 2 Gb ports. Heavy duty metal case, IP52 for environmental protection, no fans.
6KL-12VDC Same as Model 6KL-24VDCDC except the power input is 12VDCDC.
6KL-48VDC Same as Model 6KL-24VDCDC except the power input is -48VDCDC.
6KLP-48VDC PoE, same as Model 6KL-48VDCDC except the four 10/100 ports are PoE-enabled, data pairs.
6KL-125VDC Same as Model 6KL-24VDCDC except the power input is 125VDCDC nominal (range 88-150VDC).
6KL-250VDC Same as Model 6KL-24VDCDC except the power input is 250VDCDC nominal (range 160-300VDC).
6KL-AC Same as Model 6KL-24VDCDC except the power input is AC; 100 to 240 VAC, 47 to 63 Hz.
Configuration Options: Each Magnum 6KL may be configured with a choice of 100Mb ports in the C slot
6KL4-RJ45 6KL configuration, add four 10/100 copper ports in 6KL slot C
P6KL4-RJ45 6KL configuration, add four 10/100 PoE copper ports in 6KL slot C
6KL4-4MLC 6KL configuration, add four mm 2km 100Mb LC fiber ports in slot C
6KL4-2MLCRJ 6KL configuration, add two 10/100 copper and two mm 2km 100Mb LC fiber ports in slot C
6KL4-4SLC 6KL configuration, add four sgl-m 20km 100Mb LC fiber ports in slots C
6KL4-2SLCRJ 6KL configuration, add two 10/100 copper and two sgl-m 20km 100Mb LC fiber ports in slot C
6KL4-4SLCL 6KL configuration, add four sgl-m 40km 100Mb LC fiber ports in slot C
6KL4-2SLCL2R 6KL configuration, add two 10/100 copper and two sgl-m 40km 100Mb LC fiber ports in slot C
6KL4-4MT 6KL configuration, add four mm 2km 100Mb MTRJ fiber ports in slot C
6KL4-2MT2R 6KL configuration, add two 10/100 copper and two mm 2km 100Mb MTRJ fiber ports in slot C
6KL4-4MTRJ 6KL configuration, add four mm 2km 100Mb MTRJ fiber ports in slot C
6KL4-2MMRJ 6KL configuration, add two 10/100 copper and two mm 2km 100Mb MTRJ fiber ports in slot C
6KL4-4MSC 6KL configuration, add four mm 2km 100Mb SC fiber ports in slot C
6KL4-2MSCRJ 6KL configuration, add two 10/100 copper and two mm2 km 100Mb SC fiber ports in slot C
6KL4-4MST 6KL configuration, add four mm 2km 100Mb ST fiber ports in slot C
6KL4-2MSTRJ 6KL configuration, add two 10/100 copper and two mm 2km 100Mb ST fiber ports in slot C
Other models are available for single-mode fiber LC ports at 40KM, 70Km, and longer distances
6KP1V-1GCU One-port one-slot Gigabit 6K module for 6K16V / 6K8 switches, uses 1 slot and provides 1 copper (1000BASE-T) auto-negotiating Gb port.
6KP1V-1GSFP One-port one-slot Gigabit 6K module for 6K16V / 6K8 switches, uses 1 slot and provides 1 Gb SFP open transceiver port.
6KP2C-2GCU Two-port one-slot Gigabit 6K module for Magnum 6K switches, uses one 6K slot and provides two Gigabit Copper (1000BASE-T) auto-negotiating ports. Includes front-panel sheet metal cover.
6KP2C-2GSFP Two-port one-slot Gigabit 6K module for Magnum 6K switches, uses 1 slot and provides two Gb SFP open transceiver ports.
6KL-2GCU 6KL Gig module, two auto-negotiating 10/100/1000 Mb copper ports
6KL-2GSFP 6KL Gig module, two SFP pluggable open transceiver ports for user-selectable SFP Gb transceivers in each, configure in 6KL slot B only. Gb SFP’s are available for multi-mode SX (550M) and ESX (2KM); for single-mode LX (10 and 25KM), ZX (40 and 70KM); and specials.
Rack Mount Trays
KL-2TRAY Rack-mount tray and metal brackets for holding one, or two @ side-by-side, 6KL's in a 19" 1.5U rack space.



Magnum 6KL Specifications:


PERFORMANCE:

RJ-45 Ports: 100 or 10 Mb speed, full- or half-duplex mode, per port, individually determined. 10/100 auto-negotiating & auto-cross, up to 8 ports. Up to 8 PoE Ports, RJ-45 Power Sourcing per IEEE 802.3af, power on data pair.
Fiber Ports, 100 Mb: SFF-FX (LC or MTRJ), multi-mode and single-mode for each type, max of four 100Mb fiber
Gigabit Ports, 1000 Mb: Configurable, standard 10/100/1000Mb copper or SFP transceiver modules for SX, ESX, LX, ZX, up to 2 Gigabit ports.
Processing type: Store and Forward with IEEE 802.3p QOS and IEEE 802.3x. All Ports non-blocking. System aggregate forward and filter rate 4.17M pps. Address table: 8K nodes, with address aging time of 300 seconds typical. Packet buffers: 128 KB total Latency: 6μs + packet time max (TX - TX, TX - FX, FX - FX, TX-G, G-G)

NETWORK STANDARDS:

IEEE 802.3, 802.3ab, 802.1p:100BASE-TX,FX;1000BASE-SX,LX,ZX Auto-negotiation and auto-cross on 10/100 TP and PoE, IEEE 802.3u See MNS-6K & MNS-6K-SECURE datasheets for software network standards. All 100 Mb ports use Fast Ethernet rules. 1000 Mb ports use Gigabit rules.

OPERATING ENVIRONMENT:

IEC 60068 Operating temp. per “Type Test” -40° to 195°F (-40° to 85°C) UL 60950 and “Component Parts” rating: -40° to 140°F (-40° to 60°C) Storage: -60° to 210°F (-50°to 100°C) Relative humidity: 5% to 95% (noncondensing) Altitude: -200 to 13,000ft (-60 to 4,000m) Conformal coating (humidity protection) optional: Request quote

NETWORK CABLE CONNECTORS:

1000Mb fiber ports: all standard Gb SFP Transceiver types supported 1000Mb copper ports:10/100/1000Mb auto-negotiating, Cat5e & 6 UTP/STP 100Mb Copper and PoE: Category 5 UTP/STP; 10 Mb: Cat. 3, 4, 5 UTP/STP 100 Mb Fiber ports options: multi-mode and single-mode FX-MTRJ, LC For other port types and port connector types, request quote

DC POWER SUPPLY (Internal, floating ground for internal PCBs):

Power Input: 12VDC nominal (10 to 15V) 24VDC nominal (18 to 36V), -48VDC nominal (36 to 60V), 125VDC nominal (88 to 150V) 250VDC nominal (160 to 300V) Power Input for PoE: add up to 15 watts per PoE port to base unit pwr draw Power Consumption: 15 watts typical for a fully-loaded fiber model with 2Gb, 10 watts typical for 8 port copper and 100 Mb fiber model. Std. Terminal Block: “-, GND +." Dual Source is -A, -B, +A, +B Chassis gnd.

DC DUAL POWER SOURCE (OPTIONAL):

All Magnum 6KL DC models (12, 24, 48, 125, and 250 VDC) may be ordered with optional Dual-Source DC power input, for continuity of operation when either one of the DC input sources is interrupted.

MECHANICAL:

Enclosure: Steel case. Vertical panel-mounting brackets included. Console port: RJ-45 serial interface DIN-Rail mounting: Model # DIN-Rail-6KL, optional Enclosure Ingress Protection rating: IP52, per IEC 60529, and NEMA-3,3X Cooling Method: Convection, fully-enclosed steel case used as a heat sink, designed for vertical mounting, no fans. Dimensions: 8.0 in H x 1.75 in W x 6.0 in D in vertical panel-mount position. (20.3cm H x 4.4cm W x 15.2cm D) Weight: 2.1 lbs. (.95 kg)


LED INDICATORS PER RJ-45 PORT:

L/A: (Link Activity) Steady ON for Link, blinking for activity 100/10 ON = 100Mb speed, OFF = 10Mb F/H: ON for full-duplex, OFF for half-duplex, blinking for collision PoE: ON for power to PD device.


LED INDICATORS per 100Mb FIBER PORT:

L/A: Steady ON for Link, blinking for activity F/H: ON for full-duplex, OFF for half-duplex, blinking for collision


LED INDICATORS PER Gb PORT:

L/A: Steady ON for Link, blinking for activity 1000Mb ON = Gb speed (copper only) 3 LEDs indicate Gb,100Mb or 10Mb


AGENCY APPROVALS AND STANDARDS COMPLIANCE:

UL Listed (UL60950), cUL, CE, Emissions meet FCC Part 15, Class A. IEC 61850 EMC and Operating Conditions Class C for Power Substations IEEE 1613 Class 2 Environmental Standard for Electric Power Substations NEBS L3 and ETSI compliant
NEMA TS-2 & TEES for DC-powered and PoE-powered traffic control equipment.

 



Magnum 6KL Configuration Guide:

Magnum 6KL Configurable Managed Edge Switch, base unit with DC power supply and four 10/100 copper ports. May be configured with a variety of 10/100/1000 Mb fiber and copper port connector types via selection from a family of 6KL port modules per this 6KL Configuration Guide. 10 ports max. Heavy duty fully enclosed metal case designed with ribbed surface for heat dissipation, used as a heat sink, rated IP52 for environmental protection, no fans. Includes two Alarm Contacts (1 PWR, 1 software controlled), metal bracket for vertical wall or panel mounting, DIN-Rail optional. Wire speed filtering and forwarding across all ports. For licensed network management software information (MNS-6K, MNS-6K-SECURE, and S-Ring), see their respective data sheets.

6kl config

Step 1. Slot A: Choose 6KL chassis and power input type:
Model # Base Unit, Description
6KL-24VDC 24VDC (18-36) DC power, slot A has 4 10/100 ports
6KL-12VDC 12VDC (10-15) DC power, slot A has 4 10/100 ports
6KL-48VDC -48VDC (36-70) DC power, slot A has 4 10/100 ports
6KLP-48VDC -48VDC (36-70) DC power, slot A has 4 PoE 10/100 ports
6KL-125VDC 125VDC (88-150) DC power, slot A has 4 10/100 ports
6KL-250VDC 250VDC (160-300) DC power, slot A has 4 10/100 ports
6KL-AC 100 to 240 VAC, 47 to 63 Hz, slot A has 4 10/100 ports
Step 2. Slot C: If more than 4 ports at 10/100 or fiber at 100Mb is desired, choose one module from below.
Slot C is always four ports, of which a maximum of four may be 100Mb fiber.
Module Model # 10/100 RJ-45 Copper 100BASE-FX Fiber SFF
6KL4-RJ45 4 0
P6KL4-RJ45 4(PoE)
6KL4-4MLC 0 4 mm LC 2km 
6KL4-2MLCRJ 2 2 mm LC 2km
6KL4-4SLC 0 4 sgl.m LC 20km 
6KL4-2SLCRJ 2 2 sgl.m LC 20km 
6KL4-4MTRJ 0 4 mm MTRJ 2km 
6KL4-2MMRJ 2 2 mm MTRJ 2km 
6KL4-4MSC 0 4 mm SC 2km 
6KL4-2MSCRJ 2 2 mm SC 2km 
6KL4-4MST 0 4 mm ST 2km 
6KL4-2MSTRJ  2 2 mm ST 2km
Step 3. Slot B: Choose from the following for optional Gb.
(Gb is only available in slot B. Slot B may only be Gb).
Module Model # Gigabit
GB Modules, fixed ports - SFP
6KL-2GSFP 2 SFP
6KL-2GCU 2 CU
GB SFP fiber optic transceivers
SFP-GTP Gb Copper
SFP-SX Gb SX, 850nm wavelength, 550 meters distance
SFP-ESX Gb SX, 1310nm wavelength, 2km distance; single mode
SFP-LX10 Gb LX, 1310nm wavelength, 10km distance; single mode
SFP-LX25 Gb LX, 1310nm wavelength, 25km distance; single mode
SFP-LX40 Gb ZX, 1310nm wavelength, 40km distance; single mode
SFP-LX70 Gb ZX, 1310nm wavelength, 70km distance; single mode
Step 4. Choose options and extras
Model # Description
DIN-Rail-6KL DIN-Rail mount for 6KL
DUAL-SRC Two separate power inputs (12/24/ 48/ or 125VDCDC)
S-Ring KEY Software, self-healing ring management
CONSOLE CBL Console attachment cable serial null Modem (aka X-modem) cable with DB9 connectors
CONSOLE USB As above, but with a USB connector
CONFORM05 CRM Conformal coating, 5 mil, for moisture protect
CONFORM14 CRM Conformal coating, 14 mil, for oil & gas industry
MNS-6K-SECURE Optional, licensed per switch for extra security



Magnum 6KL Rack-mount Tray:


Rack-mount Tray for Magnum 6KL Managed Edge Switches, to mount in 19 inch racks.

Tray with 6KL mounted uses 1.5U vertical rack-mount space.
ETSI and 23" telco brackets are also available.

Ideal for industrial control room or telco central office applications



6kl tray

Model # KL-2TRAY    Rack-mount tray and metal brackets for holding one, or two @ side-by-side, 
6KL's in a 19" 1.5U rack space.


6kl tray

Illustration of Model # KL-2TRAY with one 6KL mounted on the left side.


6kl tray

Illustration of Model # KL-2TRAY with two side-by-side 6KL's mounted. 6KLs with AC power input shown, 6KL models with DC power input at 12V, 24V, 48V, and 125VDC are standard, with Dual Source DC power input for redundancy optional.




Magnum 6KL Full Description:

Magnum™ 6KL Managed Edge Switches incorporate the latest in reliability and security for harsh environments, especially “edge” applications on the periphery of the network where industrial devices are connected. The high performance 6KL base unit comes with four 10/100 copper ports (either regular or PoE). Up to four (4) 100Mb fiber ports or up to four more 10/100 copper ports, or combinations, may also be configured. Two Gb ports may be configured as SFP fiber ports or as 10/100/1000 copper ports.

The Magnum 6KL comes with the best-of-breed MNS-6K managed networks software, proven in tens of thousands of hardened applications over 10 years of service. It features GUI ease of use, Secure Web Management, (Simple Network Management Protocol) SNMP v2 & SNMP v3 management, 802.1p QoS Prioritization, Tag-based VLANs, IGMP Snooping and IGMP-L2 multicast management, port security, and a choice of software redundancy options including RSTP-2004 with industry leading fault recovery times in rings and meshes, and GarrettCom’s S-Ring product which supports unmanaged switches as part of resilient rings. MNS-6K-SECURE adds more security features such as SSH, RADIUS and TACACS+ support, SFTP, DHCP Server, Syslog events, TFTP and SNTP Server. See the MNS-6K and MNS-6K-SECURE datasheets for more information.

Magnum 6KLs are ideal for building a switched, hardened Ethernet network infrastructure, connecting edge devices such as PLCs and IEDs with upstream switches or routers. Designed for use in industrial and heavy duty outdoor applications such as industrial video surveillance systems with PoE, power utility substations, traffic control and transportation facilities, tariffed carrier field facilities, or oil and gas applications. The hardened Magnum 6KL handles stressful workloads.

The 6KL’s sealed metal case serves as a heat sink, enabling the 6KL to operate in the harshest industrial grade environments and achieves high EMI noise immunity. The 6KL is available with Conformal Coating options and is rated IP52 for dust and water resistance. The 6KL can be configured with the user’s choice of DC power supplies: 12VDC and 24VDC for factory floor, -48VDC for tariffed carrier field facilities and for PoE-powered applications such as IP video surveillance, and 125VDC or 250VDC for substations. An internal AC power supply may also be chosen, universal AC for use worldwide.

Like all Magnum products, the 6KL Managed Edge Switch has all appropriate agency approvals and compliance certifications, including: third-party UL testing for safety and temperature rating, NEBS L3 compliance, IEC 61850 & IEEE 1613 for power utilities, and NEMA TS-2 for use in transportation systems outdoors


Magnum 6KL Features:

  • Magnum 6KL is an Industrial Ethernet Edge Switch with full-featured MNS-6K software. The base unit also has four 10/100 copper ports. Up to four 100Mb fiber ports (SC, ST, LC, and MTRJ) or up to four more 10/100 copper ports (or combinations) may also be configured. Up to 2 Gb ports are optional.
  • Includes full-featured MNS-6K software in a small industrial package
  • Highly configurable for all fiber port types and up to 2 Gb with SFPs (Single Fiber Port)  
  • Up to 4 100Mb fiber ports (SC, ST, LC, MTRJ) may be configured. Multi-mode & single mode
  • Hardened steel case serves as a heat sink for heat dissipation (no fans); IP52 for environmental protection
  • Conformal Coating, choice of light duty (6 mil) for humidity and heavy duty (14 mil) for oil, gas and petrochemicals
  • DC power at 12VDC, 24VDC, -48VDC, 125VDC, and 250VDC Dual-Source; PoE; Universal AC optional
  • PoE configurable, Up to 8 ports
  • Meets IEC 61850 and IEEE 1613 Environmental Standard for Electric Power Substations
  • Non-blocking wire speed performance on all ports, 802.1p QoS prioritization
  • Comprehensive Magnum MNS-6K software includes:  GUI for ease-of-use, SNMPv2, v3, RMON, Advanced Security, SNTP, Event Log, BootP, DHCP
  • MNS-6K-SECURE software for extra security is available.
  • IGMP Snooping with Multicast Message Filtering or Pruning.  IGMP-L2 for multicast management
  • Manages redundant rings with the S-Ring™ software product.  RSTP and software Dual-Homing included
  • DIN-Rail optional, panel-mount brackets included
  • Entry-level Heavy Duty Managed Switch for industrial networking applications
  • Full-featured MNS-6K software in a small Edge Switch package, DIN-Rail or panel mounting
  • Configurable, all 100Mb fiber port types, 10/100 copper ports, Gb with SFPs
  • Metal case used as a heat sink (no fans), rated IP52

 




Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized