SERIAL INTERFACE
Physical Interface:
- 4 ports, RS232 or RS485, S/W selectable
- DB9 female connector
- Serial data rate from 300bps to 230.4kbps
- Data length: 1-32 bits support
Protocols/Features:
- Async to TCP/IP
- TCP/IP to serial terminal server, reverse terminal server
- SCADA protocols
- Serial Multipoint and Multimaster topologies
ETHERNET INTERFACE
Physical Interface:
- 2 RJ-45 modular connector ports
- Full Duplex, Half Duplex
- 10/100 Base TX, auto-sensing or fixed speed
- 2 100FX Ethernet SFF or SFP modules
- Single-mode 8μ cable up to 40km
- Multi-mode 62.5μ/125 cable up to 5km
Protocols/Features:
- Ethernet, TCP/IP
- Full wire speed switching between ports
- IEEE 802.3x flow control
- Prioritization per IEEE 802.1p*
- VLANs per 802.1Q
- Rapid Spanning Tree per IEEE 802.1w
- Support for 4096 MAC addresses
IP ROUTING FUNCTIONS AND FEATURES
- IP Routing, RIP, RIP II, Static Routes
- OSPF*
- Per VLAN Routing
- ICMP, ARP
- DHCP and BootP Services*
- Block/Allow IP or PORT addresses
- DiffServ, traffic prioritization*
|
SECURITY
- TCP/IP Firewall
- Serial port SSL with AES/3DES
- IP VPN using IPSec
- Secure HTTP (HTTPS)
- Serial Port VLANs
- Ethernet port security
- RSA/Radius support
- Multilevel passwords with enforcement and aging
- Management activity logging and alarms
MANAGEMENT AND DIAGNOSTICS
- Web-based Graphical User Interface (GUI)
- CLI access via TELNET connection
- Powerful built-in protocol analyzer to monitor traffic on any port
- Comprehensive layer 1 through 3 statistics
- SNMP MIB II and SNMP Traps
- PING and TELNET diagnostic functions
- Syslog Event Logging
- XML-based config file
ENVIRONMENTAL
Operating Temperature:
-40C to +85C, no fans
Storage Temperature:
-40C to +85C
Humidity:
95% non-condensing
Industrial:
IEEE1613
IEC 61850-3
IEC 61000-6-5
Emissions:
EN55022A, FCC Part 15A |
Immunity:
- EN55024
- EN61000-6-2
- EN61000-4-2 (ESD)
- EN61000-4-3 (RF)
- EN61000-4-4 (EFT)
- EN61000-4-5 (SURGE)
- EN61000-4-6 (CRF)
- EN61000-4-10 (MAG FIELD)
- EN61000-4-11 (VDI)
- EN61000-4-12 (OSCILLATION)
- EN61000-4-16 (CCM)
- EN61000-4-17 (RIPPLE)
- EN61000-4-29 (VDI)
Safety:
- UL60950-1
- EN60950-1
- CSA C22.2
Environmental Monitoring:
Relay contacts for alarms: Form C, 2 NC/NO, software controllable
POWER OPTIONS
High Voltage (H)
- 90-250 VAC or VDC, 50-60Hz
- 0.3A, 27 watts
Low Voltage DC (L)
MECHANICAL
Dimensions:
19-inch rack mount, 1U
9.5"W x 9.0"D x 1.75"H
(24.13cm x 22.86cm x 4.45cm)
Weight:
5 lbs (2.3 kg)
Mounting:
Rack, Panel Mount, and DIN-Rail Options |
* Planned Features
Ordering Information
| DX800-01-H-P |
Magnum DX800 Serial Device Router, hardened. Four RS232 / RS485 software selectable serial ports, four Ethernet Switch ports ( two 10/100 copper and two 100Mb SFP fiber. 90 - 250V DC / AC power supply, panel mounting. DIN-Rail optional. |
| DX800-01-L-P |
Magnum DX800 Serial Device Router, hardened. Four RS232 / RS485 software selectable serial ports, four Ethernet Switch ports ( two 10/100 copper and two 100Mb SFP fiber. 24 - 48 VDC power supply, panel mounting. DIN-Rail optional. |
| DX800-01-H-D |
Magnum DX800 Serial Device Router, hardened. Four RS232 / RS485 software selectable serial ports, four Ethernet Switch ports ( two 10/100 copper and two 100Mb SFP fiber. 90 - 250V DC / AC power supply, DIN-Rail Mounting. |
| DX800-01-L-D |
Magnum DX800 Serial Device Router, hardened. Four RS232 / RS485 software selectable serial ports, four Ethernet Switch ports ( two 10/100 copper and two 100Mb SFP fiber. 24 - 48 VDC power supply, DIN-Rail Mounting. |
| Optional Mounting Brackets |
|
| ACC-DX-00-RM |
Rack-mount brackets for one DX800 unit. Spares, or for field installation / conversion. |
| ACC-DX-00-RRM |
Reverse Rack-mount brackets for one DX800 unit. Spares, or for field installation / conversion. |
| ACC-DX-00-DM |
DIN-Rail-mount brackets for one DX800 unit. Spares, or for field installation / conversion. |
| ACC-DX-00-PM |
Panel-mount brackets for one DX800 unit. Spares, or for field installation / conversion. |
|