GarrettCom » Switches » 10KG

 GarrettCom Magnum 10KG: Managed Switch with Timing


Overview:

  • Next Generation industrial switch offers up to eight Gb ports and 16 100Mb ports with configurability and reliability
  • Dual hot-swappable power supplies in a 1U or 1.5U rack-mount package
  • Precision timing, full IEEE 1588v2 implementation
  • Energy-efficient thermal design for maximum reliability
  • Substation-Hardened, IEC 61850-3 compliant


Description:

The Magnum10KG Switch provides the bandwidth and advanced port configurability for data-intensive utility and industrial applications such as the Smart Grid. New advanced thermal design techniques (patent pending) enable the 10KG to deliver high reliability and configurability even at extended operating temperatures. Special rack-mount cooling features include Thermal Fins for extra heat dissipation and internal heat transfer techniques that use the case as a heat sink. Cooler operation of internal electronic components leads to longer life-time and increased reliability.



  • Ordering Information
  • Specifications
  • Configuration Guide
  • Description & Features



Magnum 10KG Ordering Information:

Model Description
Hot-Swap Power supply models, w/Thermal Fins
10KG-HSPHH-TF Magnum 10KG Managed Switch, front-mount, with two PS slots for two H Hot-Swap Power Supplies. May be factory configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case with thermal fins for maximum convection cooling efficiency in a rack-mount setting.
10KGR-HSPHH-TF Same as Model 10KG-HSPHH-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KG-HSPHL-TF Magnum 10KG Managed Switch, front-mount, with two PS slots for one H and one L Hot-Swap Power Supply. May be factory-configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case with thermal fins for maximum convection cooling efficiency in a rack-mount setting.
10KGR-HSPHL-TF Same as Model 10KG-HSPHL-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KG-HSPLL-TF Magnum 10KG Managed Switch, front-mount, with two PS slots for two L Hot-Swap Power Supplies. May be factory configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case with thermal fins for maximum convection cooling efficiency in a rack-mount setting.
10KGR-HSPLL-TF Same as Model 10KG-HSPLL-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
Hot-Swap Power supply models, wo/Thermal Fins
10KG-HSPHH Magnum 10KG Managed Switch, front-mount, with two PS slots for two H Hot-Swap Power Supplies. May be factory-configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb.
10KGR-HSPHH Same as Model 10KG-HSPHH except chassis is a Reverse Mount unit. (All signal and power cables are in the rear).
10KG-HSPHL Magnum 10KG Managed Switch, front-mount, with two PS slots for one H and one L Hot-Swap Power Supply. May be factory-configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb.
10KGR-HSPHL Same as Model 10KG-HSPHL except chassis is a Reverse Mount unit. (All signal and power cables are in the rear).
10KG-HSPLL Magnum 10KG Managed Switch, front-mount, with two PS slots for two L Hot-Swap Power Supplies. May be factory-configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb.
10KGR-HSPLL Same as Model 10KG-HSPLL except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
Fixed Power supply models w/Thermal Fins
10KG-H-TF

Magnum 10KG Managed Switch, front-mount, with integral 90 250V AC/DC Power Supply. May be factory-configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy duty case with thermal fins for maximum convection cooling efficiency in a rack-mount setting.

10KGR-H-TF Same as Model 10KG-H-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KG-HH-TF Magnum 10KG Managed Switch, front-mount, with two integral 90- 250V AC/DC Power Supply. May be factory-configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case with thermal fins for maximum convection cooling efficiency in a rack-mount setting.
10KGR-HH-TF Same as Model 10KG-HH-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KG-L-TF Same as Model 10KG-H-TF except the integral power supply is L 24/48VDC.
10KGR-L-TF Same as Model 10KG-L-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KG-LL-TF Same as Model 10KG-HH-TF except the integral power supplies are L 24/48VDC.
10KGR-LL-TF Same as Model 10KG-LL-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KG-HL-TF Same as Model 10KG-HH-TF except the integral power supplies are one H 90-250V AC/DC and one L 24/48VDC.
10KGR-HL-TF Same as Model 10KG-HL-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KG-AC-TF Same as Model 10KG-H-TF except the power supply is an auto-sensing worldwide AC power type (100-240V AC) using a UL-registered recessed-male IEC 320 plug.
10KGR-AC-TF Same as Model 10KG-AC-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
PoE models
10KGP-HSPLL-TF Magnum 10KG Managed Switch, front-mount, with two PS slots for two L Hot-Swap Power Supplies. Supports PoE – choose PoE module(s) separately. May be factory-configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case with thermal fins for maximum convection cooling efficiency in a rack-mount setting.
10KGPR-HSPLL-TF Same as Model 10KGP-HSPLL-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KGP-HSPLL Magnum 10KG Managed Switch, front-mount, with two PS slots for two L Hot-Swap Power Supplies. Supports PoE – choose PoE module(s) separately. May be factory-configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb.
10KGPR-HSPLL Same as Model 10KGP-HSPLL except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KGP-L-TF

Magnum 10KG Managed Switch, front-mount, with integral 24/48VDC Power Supply. Supports PoE – choose PoE module(s) separately. May be factory configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case with thermal fins for maximum convection cooling efficiency in a rack-mount setting.

10KGPR-L-TF Same as Model 10KGP-L-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KGP-LL-TF Magnum 10KG Managed Switch, front-mount, with two integral 24/48VDC Power Supply. Supports PoE – choose PoE module(s) separately. May be specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case with thermal fins for maximum convection cooling efficiency in a rack-mount setting.
10KGPR-LL-TF Same as Model 10KGP-LL-TF except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)
10KGP-L

Magnum 10KG Managed Switch, front-mount, with integral 24/48VDC Power Supply. Supports PoE – choose PoE module(s) separately. May be factory configured with a variety of fiber and copper port modules selected designed specifically for the 10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb.

10KGPR-L Same as Model 10KGP-L except chassis is a Reverse Mount unit. (All signal and power cables are in the rear)



“HSP” Hot-Swap power supply options:

Model Description
(If “HSP” base unit is selected, choose up to two power supply modules. For “-HF” or “-LF” models below, Also choose the KT-RFAN option in the Options & Extras below)
HSPM-H AC or DC power (90-250V)
HSPM-L 24/48V DC power (22-60V)
HSPM-HF AC or DC power (90-250V) w/Internal cooling fan
HSPM-LF 24/48V DC power (22-60V) w/Internal cooling fan
10K-PSBLNK Blank cover for one hot-swap power supply slot



Following module can be configured in Slots A thru D only:

Model Description
Magnum 10KG (Slots A thru D) Port Modules:
10-2RJSFP Module with two 10/100/1000 RJ-45 ports and SFP ports
Includes 1588 Timing capabilities
Gigabit SFP transceiver options for Slots A thru D:
SFP-GTP Gb SFP transceiver, Copper 1000Base-T, 100m
SFP-SX Gb SFP transceiver, 1000Mb-SX, 850nm wavelength, 550m
SFP-ESX Gb SFP transceiver, 1000Mb, 1310nm wavelength, 2km
SFP-LX10 Gb SFP transceiver, 1000Mb-LX, 1310nm wavelength, 10km
SFP-LX25 Gb SFP transceiver, 1000Mb-LX, 1310nm wavelength, 25km
SFP-ZX40 Gb SFP transceiver, 1000Mb-ZX, 1550nm wavelength, 40km
SFP-ZX70 Gb SFP transceiver, 1000Mb-ZX, 1550nm wavelength, 70km

100Mb SFP transceiver options for module 10-2RJSFP:

SFP100P-FXMM2 100FX fiber SFP transceiver, multimode, 2km
SFP100P-FXSM20 100FX fiber SFP transceiver, singlemode, 20km
SFP100P-FXSM40 100FX fiber SFP transceiver, singlemode, 40km
SFP100P-RJ45 10/100Mb, RJ45 SFP transceiver

 

Following modules can be configured in Slots E thru H only:

Model Description
Magnum 10KG (Slots E thru H) Port Modules:
10K4-RJ45 Module w/four 10/100 RJ-45 ports
10K4T-RJ45 Module w/four 10/100 RJ-45 ports with 1588 timing
10K4PX-RJ45 Module w/four 10/100 RJ-45 PoE PLUS (802.3at) ports
Supports PoE (802.3af) or PoE Plus (802.3at)
(PoE chassis and L power supply is required)
10K4-MLC Module w/four 100Mb multimode fiber LC ports
10K4T-MLC Module w/four 100Mb multimode fiber LC ports with 1588 timing
10K4-SLC Module w/four 100Mb singlemode fiber LC ports (20km)
10K4T-SLC Module w/four 100Mb singlemode fiber LC ports (20km)
with 1588 timing
10K4-SLCL Module w/four 100Mb “long-haul” singlemode fiber LC ports (40km)
10K4T-SLCL Module w/four 100Mb “long haul” singlemode fiber LC ports (40km)
with 1588 timing
10K4-MTRJ Module w/four 100Mb multimode fiber MTRJ ports
10K4T-MTRJ Module w/four 100Mb multimode fiber MTRJ ports with 1588 timing
10K2-MST Module w/two multimode ST fiber ports
10K2T-MST Module w/two multimode ST fiber ports with 1588 timing
10K2-SST Module w/two singlemode ST fiber ports
10K2T-SST Module w/two singlemode ST fiber ports with 1588 timing
10K2-F10ST Module w/two multimode 10Mb ST fiber ports
10K2-MSC Module w/two multimode SC fiber ports
10K2T-MSC Module w/two multimode SC fiber ports with 1588 timing
10K2-SSC Module w/two singlemode SC fiber ports
10K2T-SSC Module w/two singlemode SC fiber ports with 1588 timing
10K2-SSCL Module w/two “long-haul” singlemode SC fiber ports
10K4-FXSFP Module w/four open 100Mb SFP ports

100Mb SFP transceiver options for module 10K4-FXSFP:

SFP100P-FXMM2 100FX fiber SFP transceiver, multimode, 2km
SFP100P-FXSM20 100FX fiber SFP transceiver, singlemode, 20km
SFP100P-FXSM40 100FX fiber SFP transceiver, singlemode, 40km
SFP100P-RJ45 10/100Mb, RJ45 SFP transceiver
NOTE: 1588 timing modules must be configured in vertical slot pairs only.
(For example, if slot E, on the top, has a timing module, then slot F, below it, must also 9 have a timing module or be unpopulated.)
10KG Slot locations:



Options & Extras:

Model Description
KT-RFAN Removable Fan for extra fiber ports and cooling;
Optional for up to 16 fiber ports. Required for 18 to 36 fiber ports.
CONSOLE-CBLQD Console attachment cable. Serial null modem (aka X-modem) cable with RJ45 connector for the 10KG on one end and a DB-9 connector on other end.
CONSOLE-CBLQU Same as above, but with USB connector
MNS-6K-SECURE Optional, licensed software per switch for extra security
S-RING-Key S-Ring Redundancy Manager licensed software for redundant ring management. One S-Ring key is for licensed use one 10KG-managed self healing ring.
CONFORM05-RMOD Conformal coating, heavy duty silicone at 5 mil thickness, for interior PCBs, PS and modules (for moisture protection)
CONFORM08-RMOD Conformal coating, heavy duty silicone at 8 mil thickness, for interior PCBs, PS and modules (for corrosion in paper, mining, and oil & gas industries)
DUAL-SRC-L Provides two separate 24/48VDC power inputs (the unit will operate from either or both) to accommodate redundant 24/48V installations for increased availability and ease of DC power source maintenance. Includes internal diode protection to prevent feedback. Order this option as a line item, for factory configuration. The unit will have its model number changed to append "-DSRC". ONLY available on "L", "LL" or "HSPLL" chassis options. Note - not needed for "LL" PoE chassis which are inherently dual-source.
Hot-Swap power supply locations



Magnum 10KG Specifications:

Product Description Magnum 10KG Fiber-configurable Convection-cooled Managed Switch, base unit. Provides 10 modular slots for configuration flexibility of up to eight Gb ports and 16 copper or fiber ports. Includes 2 slots for Hot-Swap Power Supplies; Case with thermal fins.
Mechanical
Enclosure Rugged high-strength sheet metal. 1.5U rack-mounting or stand-alone
Rack-mounting Brackets 19” included
Cooling Method Free convection, special (patent pending) thermal techniques
Dimensions 2.63in H (with thermal fins) x17.5in W x 12.in D (4.3cm H x 44.5cm W x 30.7cm D)
Weight 14.2 lbs. (6.5 kg)
Network Standards
Ethernet IEEE 802.3z, 802.3ab, 802.1p: 100BASE-TX, -FX, 1000BASE-SX, -LX
Auto-negotiation and Auto-crossover TP, IEEE 802.3u
IEEE 1588v2 Compliant
IPv6 Compliant
Performance
Fiber Ports, 100 Mb
(multi-mode and single-mode)
Configurable in modules. Regular ST or SC at 2/module, or SFF (Small Form Factor) for high fiber port density, 4 per module. Each FDX or HDX, default is FDX mode
Gigabit Ports, 1000 Mb Configurable, std. See configuration guide for selection of modules
RJ-45 Ports 100 or 10 Mb speed, full- or half-duplex mode, per port, individually determined.10/100 auto-negotiating & auto-cross, 16 ports max.
All Ports Non-Blocking Processing type: Store and Forward with IEEE 802.3x full-duplex flow control
System aggregate forward and filter rate: 11.9Mpps. Address table: 8K nodes, self-learning, with address aging Packet buffers: 512KB for 10 and 100Mb, 128KB for Gb
Latency: 6μs + packet time max (TX - TX, TX - FX, FX - FX, TX-G, G-G)
AC (IEC-type, Male Recessed)
Power Input, AC 100 to 240 VAC, 47 to 63 Hz (auto ranging)
Power Consumption 30 watts typical when fully loaded
DC Dual Power Source (optional)
High (H) Nominal Input 90 to 250V AC/DC
Low (L) Nominal Input 22VDC to 60VDC
  (Standard Terminal Block: “-, GND, +”, Power Consumption: 55 watts when fully loaded with 8 Gb ports and 16 100Mb fiber.
LED Indicators, 100 Mb and 10 Mb Fiber Ports
L/H
Steady on when fiber link is operational and blinking for data traffic
F/H
ON = full-duplex mode, OFF = half-duplex mode
LED Indicators, per RJ-45 Port
L/A
Steady on when fiber link is operational and blinking for data traffic
F/H
ON = full-duplex mode, OFF = half-duplex mode
Relay Contacts for Alarms (except PoE version)
Two Alarm Contact
HW & SW alarms are normally open until the unit is powered and software started. Under normal operation they are closed.
Form C hardware alarm will be opened with 1) any power supply loss and 2) fan failures. Form C software alarm will be
opened when any pre-defined software event occurs. For PoE versions: One software controllable Form C alarm with NC/
NO.
Operating Environment
Operating Temperature
IEC 60068 Operating temp. per “Type Test” -40° to 185°F (-40° to 85°C)
Temperature Rating (components)
UL 60950 140°F (60°C)
Storage Temperature
-40° to 185°F (-40°to 85°C)
Ambient Relative Humidity
5% to 95% (non-condensing)
Altitude
-200 to 13000ft (-60 to 4000m)
Conformal Coating (humidity protection)
Request quote
Network Cable Connectors
1000 Mb Ports
Standard SFPs and GBICs supported, see modules description
100 Mb Fiber Ports
Multi-mode FX-MTRJ, LC, ST, SC; sgl-mode 20km LC, SC and ST, and 50km “long reach” sgl-mode LC, SC
10 Mb Fiber Ports
Multi-mode and single-mode ST
100 Mb Copper Ports
Category 5 UTP/STP; 10 Mb: Cat. 3,4, 5 UTP/STP
Agency Standards Approval and Compliance
UL/cUL 60950, EN55022 FCC Part 15
CE, EMC & ENV
IEC61850-3
EMC and Environmental Operating Conditions Class C for Power Substations
IEEE 1613 Class 2
Environmental Standard for Electric Power Substations
NEMA TS-2
Traffic Control
EN50155
Railways
Warranty
Warranty
Five Years



Magnum 10KG Configuration Guide:

Step 1. Choose 10KG chassis and power input type.
Model No.                   Description, Base Unit of Magnum 10KG Managed Switch
10KG-AC Front mount w/ worldwide  AC power (100- 240V), Fan-cooled chassis
10KG-H Front mount with AC/DC power (90-250V)
10KG-HH Front mount with two fixed AC/DC power (90-250V)
10KG-HL Front mount with one “H” (90-250V AC/ DC) and one “L” (24/48VDC) fixed power supplies.
10KG-HSPHH Front mount, incl two slots for “H” (90-250V AC/DC) Hot-Swap Power Supply
10KG-HSPHL Front mount, incl 2 slots for one “H” (90-250V  AC/DC) and one “L” (24/48VDC) Hot-Swap Power Supply
10KG-HSPLL Front mount, incl two slots for “L” (24/48VDC) Hot-Swap Power Supply
10KG-L Front mount with 24/48VDC power
10KG-LL Front mount with two “L” (24/48VDC) fixed power supplies.
With Thermal Fins
10KG-AC-TF Front mount w/ worldwide  AC power (100- 240V); thermal fins. Fan-cooled chassis.
10KG-H-TF Front mount with AC/DC power (90-250V); thermal fins
10KG-HH-TF Front mount with two fixed AC/DC power (90-250V); thermal fins
10KG-HL-TF Front mount with one “H” (90-250V AC/DC) and one “L” (24/48DC) fixed power supplies; thermal fins
10KG-HSPHH-TF Front mount with two “H”(90-250V  AC/DC) Hot Swap power slots
10KG-HSPHL-TF Front mount, incl two slots for one “H” (90-250V  AC/DC) and one “L” (24/48VDC) Hot-Swap Power Supply; thermal fins
10KG-HSPLL-TF Front mount w/ two slots for “L” (24/48VDC) Hot-Swap PS; thermal fins
10KG-L-TF Front mount with 24/48DC power; thermal fins
10KG-LL-TF Front mount with two “L” (24/48VDC) fixed power supplies; thermal fins
Reverse
10KGR-AC Reverse mount w/ worldwide  AC power (100-240V). Fan-cooled chassis.
10KGR-H Reverse mount with AC/DC power (90-250V)
10KGR-HH Reverse mount with two fixed AC/DC power (90-250V)
10KGR-HL Reverse mount with one “H” (90-250V AC/ DC) and one “L” (24/48VDC) fixed power supplies
10KGR-HSPHH Rev. mount, incl two slots for “H”  (90-250V AC/DC) Hot-Swap Power Supply
10KGR-HSPHL Reverse mount, incl two slots for one “H” (90-250V  AC/DC) and one “L” (24/48VDC) Hot-Swap Power Supply
10KGR-HSPLL Rev. mount, incl two slots for “L” (24/48VDC) Hot-Swap Power Supply
10KGR-L Reverse mount with 24/48VDC power
10KGR-LL Reverse mount with two “L” (24/48VDC) fixed power supplies
Reverse with Thermal Fins
10KGR-AC-TF Reverse mount w/ worldwide  AC power (100-240V); thermal fins, Fan-cooled chassis
10KGR-H-TF Reverse mount with AC/DC power (90- 250V); thermal fins
10KGR-HH-TF Reverse mount with two fixed AC/DC power (90-250V); thermal fins
10KGR-HL-TF Reverse mount with one “H” (90-250V AC/ DC) and one “L” (24/48DC) fixed power supplies; thermal fins
10KGR-HSPHH-TF Reverse mount w/ two “H”(90-250V  AC/DC) Hot Swap power slots
10KGR-HSPHL-TF Reverse mount, incl two slots for one “H” (90-250V  AC/DC) and one “L” (24/48VDC) Hot-Swap Power Supply; thermal fins
10KGR-HSPLL-TF Rev. mount w/ two slots for “L” (24/48VDC) Hot-Swap Power Supply; thermal fins
10KGR-L-TF Reverse mount with 24/48VDC power; thermal fins
10KGR-LL-TF Reverse mount with two “L” (24/48VDC) fixed power supplies; thermal fins
PoE Models
10KGP-HSPLL Same as 10KG-HSPLL but supports PoE.
10KGP-HSPLL-TF Same as 10KG-HSPLL-TF but supports PoE.
10KGPR-HSPLL Same as 10KGR-HSPLL but supports  PoE.
10KGPR-HSPLL-TF Same as 10KGR-HSPLL-TF but supports PoE.
10KGP-L Same as 10KG-L but supports PoE.
10KGP-L-TF Same as 10KG-L-TF but supports PoE.
10KGPR-L Same as 10KGR-L but supports PoE.
10KGPR-L-TF Same as 10KGR-L-TF but supports PoE.
10KGP-LL Same as 10KG-LL but supports PoE.
10KGP-LL-TF Same as 10KG-LL-TF but supports PoE.
10KGPR-LL Same as 10KGR-LL but supports PoE.
10KGPR-LL-TF Same as 10KGR-LL-TF but supports PoE.
10KGR-HL
Reverse mount with one “H” (90-250V AC/ DC) and one “L” (24/48VDC) fixed power supplies
10KGR-HSPHH
Rev. mount, incl two slots for “H” (90-250V AC/DC) Hot-Swap Power Supply
10KGR-HSPHL
Reverse mount, incl two slots for one “H” (90-250V AC/DC) and one “L” (24/48VDC) Hot-Swap Power Supply
10KGR-HSPLL
Rev. mount, incl two slots for “L” (24/48VDC) Hot-Swap Power Supply
10KGR-L
Reverse mount with 24/48VDC power
10KGR-LL
Reverse mount with two “L” (24/48VDC) fixed power supplies
Reverse with Thermal Fins
10KGR-AC-TF
Reverse mount w/ worldwide AC power (100-240V); thermal fins, Fan-cooled chassis
10KGR-H-TF
Reverse mount with AC/DC power (90250V); thermal fins
10KGR-HH-TF
Reverse mount with two fixed AC/DC power (90-250V); thermal fins
10KGR-HL-TF
Reverse mount with one “H” (90-250V AC/ DC) and one “L” (24/48DC) fixed power supplies; thermal fins
10KGR-HSPHH-TF
Reverse mount w/ two “H”(90-250V AC/DC) Hot Swap power slots
10KGR-HSPHL-TF
Reverse mount, incl two slots for one “H” (90-250V AC/DC) and one “L” (24/48VDC) Hot-Swap Power Supply; thermal fins
10KGR-HSPLL-TF
Rev. mount w/ two slots for “L” (24/48VDC) Hot-Swap Power Supply; thermal fins
10KGR-L-TF
Reverse mount with 24/48VDC power; thermal fins
10KGR-LL-TF
Reverse mount with two “L” (24/48VDC) fixed power supplies; thermal fins
PoE Models
10KGP-HSPLL
Same as 10KG-HSPLL but supports PoE.
10KGP-HSPLL-TF
Same as 10KG-HSPLL-TF but supports PoE.
10KGPR-HSPLL
Same as 10KGR-HSPLL but supports PoE.
10KGPR-HSPLL-TF
Same as 10KGR-HSPLL-TF but supports PoE.
10KGP-L
Same as 10KG-L but supports PoE.
10KGP-L-TF
Same as 10KG-L-TF but supports PoE.
10KGPR-L
Same as 10KGR-L but supports PoE.
10KGPR-L-TF
Same as 10KGR-L-TF but supports PoE.
10KGP-LL
Same as 10KG-LL but supports PoE.
10KGP-LL-TF
Same as 10KG-LL-TF but supports PoE.
10KGPR-LL
Same as 10KGR-LL but supports PoE.
10KGPR-LL-TF
Same as 10KGR-LL-TF but supports PoE.


Step 2. If “HSP” base unit with hot swappable power supplies is selected, choose up to two power supply modules. For “-HF” or “-LF” models below, ALSO choose KT-RFAN option (see step 5) *Note, for PoE, every power supply chosen must be -48V.
Model No.                   Description, Base Unit of Magnum 10KG Managed Switch
HSPM-H
AC or DC power (90-250V)
HSPM-HF
AC or DC power (90-250V) w/internal cooling fan
HSPM-L
24/48 DC power (22-60V) Note: for PoE at -48VDC: Input should be -44 to -57VDC
HSPM-LF
24/48 DC power (22-60V) w/ internal cooling fan;
Note: for PoE at -48VDC: Input should be -44 to -57VDC
10K-PSBLNK
Blank cover for one hot-swap power supply slot


Step 3. Choose modules for Gigabit Slots A, B, C, and D (may be blank).
Model No.                   Description, Base Unit of Magnum 10KG Managed Switch
10-2RJSFP

Two combo/dual media ports for copper RJ45 10/100/1000 Mb or SFP. Ports are auto media detect and may use either RJ45 or SFP module. Includes 1588 timing capability.
Gigabit SFP Fiber Transceivers
SFP-GTP
Gb Copper
SFP-SX
Gb SX, 850nm wavelength, 550 meters distance
SFP-ESX
Gb SX, 1310nm wavelength, 2km distance
SFP-LX10
Gb LX, 1310nm wavelength, 10km distance
SFP-LX25
Gb LX, 1310nm wavelength, 25km distance
SFP-ZX40
Gb ZX, 1550nm wavelength, 40km distance
SFP-ZX70
Gb ZX, 1550nm wavelength, 70km distance
100Mb SFP Transceivers
SFP100P-FXMM2
100FX Fiber Optic SFP transceiver, multi-mode, 2Km
SFP100PFXSM20 100FX Fiber Optic SFP transceiver, singlemode, 20Km
SFP100PFXSM40 100FX Fiber Optic SFP transceiver, singlemode, 40Km
SFP100P-RJ45
100Mb Copper SFP transceiver, 10/100 auto-negotiating


Step 4. Choose 1 port module for up to 4 slots (E – H) (some may be blank) Configure timing in slots E – H in pairs only i.e. E, F or G, H etc…

For example, if slot E has a timing module, then slot F must have a timing  module or be unpopulated.  If slot G has timing,  then slot H must have timing or be unpopulated.
Module No.                                                1588 Timing 10/ 100  100BASE- FX(MM)  100BASE- FX(SM)
10K4-RJ45   4    
10K4T-RJ45 X 4    
10K4PX- RJ45*   4 (PoE+
802.3at)
   
10K4-MLC     4 (LC)  
10K4T-MLC X   4 (LC)  
10K4-SLC       4 (20km LC)
10K4T-SLC X     4 (20km LC)
10K4-SLCL       4 (40km LC)
10K4T-SLCL X     4 (40km LC)
10K4-MTRJ     4 (MTRJ)  
10K4T- MTRJ X   4 (MTRJ)  
10K2-MSC     2 (SC)  
10K2T-MSC X   2 (SC)  
10K2-MST     2 (ST)  
10K2T-MST X   2 (ST)  
10K2-SST       2 (20km ST)
10K2T-SST X     2 (20km ST)
10K2-SSC       2 (20km SC)
10K2T-SSC X     2 (20km SC)
10K2-SSCL       2 (40km SC)
10K2-F10ST Module with two multi-mode  10Mb ST ports
10K4-FXSFP SFP module w/ 4 100Mb SFP open xcvr slots
* Configure in PoE-supporting base units only, up to sixteen 802.3af ports per 10KG
100Mb SFP Transceivers
SFP100P-FXMM2
100FX Fiber Optic SFP transceiver, multimode, 2Km
SFP100P-FXSM20
100FX Fiber Optic SFP transceiver, singlemode, 20Km
SFP100P-FXSM40
100FX Fiber Optic SFP transceiver, singlemode, 40Km
SFP100P-RJ45 100Mb Copper SFP transceiver, 10/100 auto-negotiating


Step 5. Choose Options and Extras
Model No. Base Unit Description
KT-RFAN Removable fan unit for extra cooling of 10-series products. Optional for 0 to 16 fiber ports, required for 18 to 36 fiber ports.
CONSOLE-CBLQD Console attachment cable serial null Modem cable with one RJ-45 for 10K and a DB-9
CONSOLE-CBLQU Console attachment cable serial null Modem cable with one RJ-45 for 10K and a USB
MNS-6K-SECURE-LIC1 Optional, licensed per switch for extra security
S-RING-KEY Software, optional self-healing redundant ring management
CONFORM05-RMOD Conformal coating, 5 mil, for moisture protection
CONFORM08-RMOD Conformal coating, 8 mil, for corrosive environments
DUAL-SRC-L Provides two separate 24/48VDC power inputs (the unit will operate from either or both) to accommodate redundant 24/48V installations for increased availability  and ease of DC power source maintenance. Includes internal diode protection to prevent feedback. Order this option as a line item, for factory configuration.  The unit will have its model number changed to append "-DSRC".  ONLY available  on "L", "LL" or "HSPLL" chassis options.  Note - not needed for "LL"  PoE chassis which are inherently dual-source.



Magnum 10KG Description:

The Magnum10KG Switch provides the bandwidth and advanced port configurability for data-intensive utility and industrial applications such as the Smart Grid. New advanced thermal design techniques (patent pending) enable the 10KG to deliver high reliability and configurability even at extended operating temperatures. Special rack-mount cooling features include Thermal Fins for extra heat dissipation and internal heat transfer techniques that use the case as a heat sink. Cooler operation of internal electronic components leads to longer life-time and increased reliability.

Next-Generation industrial switch features, especially for power utility facilities in the Smart Grid, importantly include high precision IEEE 1588v2 timing synchronization with precision as low as single-digit nanoseconds. The Magnum 10KG provides an advanced level of 1588v2 timing features and accuracy, using integrated hardware and software. Advanced timing is supported on 100Mb and Gb ports, and is configurable on both fiber and copper port types.

The Magnum 10KG also offers configurable Dual Hot-Swappable power supplies for redundancy and increased reliability. Both high voltage AC/DC and low voltage DC hot-swappable power supplies are configurable in the Magnum 10KG. Matching power supply types are normally selected for each of the two hot-swappable slots. Software monitors each power supply, and can signal when a power supply module replacement is needed. The swap-out can readily be done while the 10KG Switch continues in operation.

The eight port configuration slots in the Magnum 10KG provide the flexibility for network designers to configure up to eight fiber or copper Gb ports and up to 16 100 Mb SFF fiber or copper ports. Copper ports can optionally be Power- Sourcing PoE. Modules may be configured for regular port types, IEEE 1588 v2 timing, or combinations. See the 10KG Product bulletin for configuration details.

The Magnum 10KG comes with licensed MNS-6K software or MNS-6K-SECURE, which allow the user to configure the Magnum 10KG as a Managed Switch and implements security features and other software-enabled features.

(NOTE: Magnum 10KG managed switch will work with MNS-6K Rel v4.4.1 firmware or higher version only, or MNS-6K-SECURE v14.4.1 firmware or higher version only. Using any earlier MNS-6K Rev-level versions will not provide support 13 for the Magnum 10KG switch)


Magnum 10KG Features:


Configurability and Reliability

The Magnum10KG Switch provides the
bandwidth and advanced port configurability for
data-intensive utility and industrial applications
such as the Smart Grid. New advanced
thermal design techniques (patent pending)
enable the 10KG to deliver high reliability and
configurability even at extended operating
temperatures. Special rack-mount cooling
features include Thermal Fins for extra heat
dissipation and internal heat transfer techniques
that use the case as a heat sink. Cooler operation
of internal electronic components leads to
longer life-time and increased reliability.

Smart Grid Optimization

Next Generation industrial switch features,
especially for power utility facilities in the Smart
Grid, importantly include high precision IEEE
1588v2 timing synchronization with precision as
low as single-digit nanoseconds. The Magnum
10KG provides a new advanced level of 1588v2
timing features and accuracy, using integrated
hardware and software. Advanced timing is
supported on 100Mb and Gb ports, and is
configurable on both fiber and copper
port types.

Hot-Swappable Power Supplies

The Magnum 10KG also offers configurable dual
hot-swappable power supplies for redundancy
and increased reliability. Both high voltage AC/
DC and low voltage DC hot-swappable power
supplies are configurable in the Magnum
10KG. Different power supply types may be
selected for each of the two hot-swappable slots.
Software monitors each power supply, and can
signal when a power supply module swap is
needed. The swap-out can readily be done while
the 10KG Switch continues in operation.


Power-Sourcing PoE

The eight port configuration slots in the
GarrettCom Magnum 10KG - Configurable Managed Switch
Magnum 10KG provide the flexibility for
network designers to configure up to eight
fiber or copper Gb ports and up to 16 100 Mb
SFF fiber or copper ports. Copper ports can
optionally be Power- Sourcing PoE. Modules
may be configured for regular port types, IEEE
1588 v2 timing, or combinations.


Rugged Design

Magnum 10KG Managed Switches have rugged
metal cases for regular or “Reverse” rack mounting,
and auto-ranging power supplies for operation with standard AC power worldwide, or internal DC power supply choices. Moisture and corrosion protecting Conformal Coating is optional. The Magnum 10KG is designed and manufactured in the USA and is backed by a five year warranty.


Secure Management Software

Magnum 10KG Managed Switches come with
field-proven MNS-6K and MNS-6K-SECURE
Management Software. MNS-6K features
include LAN software support including SNMP
management, IPv6, Secure Web Management,
IGMP, graphical user interface (GUI), redundant
LANs support, and many network management
security and ease-of-use features.

 

 




Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized