GarrettCom Products » Switches » Edge switch family » IPS42

 GarrettCom Magnum IPS42: Internal Power Supplies for ES42 edge Switch Family


3 Models of IPS42



Description:

The Magnum IPS42 chassis brings big-switch internal power supplies to compact unmanaged industrial edge switches. The AC/DC model allows the user to connect into 125VDC substation power or into worldwide AC power. Dual-source models operate from either of two DC power inputs and provide high availability. The five models of the Magnum IPS42 Internal Power Supply chassis yield a rugged Edge Switch package for mission critical industrial networking applications.



  • Ordering Information
  • Technical Specifications
  • General Description
  • Features
  • Pictures



Ordering Information for the Magnum IPS42:


Part Number Description
IPS42-125VDC-DSRC Dual Source Internal Power Supply package for use with any ES42H or ES42P Series Edge Switch.  Requires simultaneous ordering of an ES42 (without external power supply) as a separate line item. Rated 100 to 250 Volts DC, Dual Source.  Power input via recessed terminal block, UL Listed and surge protected.
IPS42-24VDC-DSRC Dual Source Internal Power Supply package for use with any non-PoE ES42H or ES42P Series Edge Switch.  Requires simultaneous ordering of an ES42 (without external power supply) as a separate line item. Rated 20 to 36 Volts DC, Dual Source.  Power input via recessed terminal block, UL Listed and surge protected.
IPS42-48VDC-DSRC Dual Source Internal Power Supply package for use with any ES42H or ES42P Series Edge Switch.  Requires simultaneous ordering of an ES42 (without external power supply) as a separate line item. Rated 44 to 57 Volts DC, Dual Source.  Power input via recessed terminal block, UL Listed and surge protected.
IPS42-AC Internal Power Supply package for use with any ES42H or ES42P Series Edge Switch.  Requires simultaneous ordering of an ES42 (without external power supply) as a separate line item. Standard world-wide AC power input via standard IEC 320 recessed male connector, UL Listed and surge protected.
IPS42-AC/DC Internal Power Supply package for use with any ES42H or ES42P Series Edge Switch.  Requires simultaneous ordering of an ES42 (without external power supply) as a separate line item. Rated 100 to 250 Volts, AC or DC.  Power input via recessed terminal block, UL Listed and surge protected.

 



Technical Specifications for the IPS42:

Operating Environment
Operating Temperature IEC 60068 exceeds -40° to 185°F (-40° to 85°C)
Storage -60° to 212°F (-50°to 100°C)
Relative humidity

5% to 95% (non-condensing)

Altitude -200 to 13000ft (-60 to 4000m)
UL 60950 "Component parts" rating -40° to 140°F (-40° to 60°C)
Conformal coating (humidity protection) optional: Request Quote
Relay Contact for Alarms
From C, one NC indicating internal power
AC/DC Power Supply (Model IPS-AC/DC)
Power input: DC: 100 - 250 VDC, or
AC: 100 - 250 VAC, 47 to 63 Hz, auto ranging
Surge Rating IEC 61000-4-3, Class 3/ 4 (4KV for DC)
Std. Recessed Terminal Block “-, GND, +”, UL-Listed
Power Consumption 10 watts typical for a 4+2-port fiber model
DC for Dual Source Models of ISP42
The Magnum IPS42 DualSRC models have Dual DC power input, for continuity
of operation when either of the DC input sources is interrupted. Available for
125VDC, -48VDC, or 24VDC.
DC POWER SUPPLIES for Dual Source DC
125VDC Input 100 to 250VDC nominal
-48VDC Input -44 to -57VDC
24VDC Input 20 to 36VDC
Surge Rating IEC 61000-4-3, Class 3/4 (4KV for DC)
Std. Terminal Block for DualSRC A: “-, GND, +”, B: “-, GND, +”,
Power Consumption: 10 watts typical for a 4+2-port fiber model
AC Power Supply (Model IPS42-AC)
AC Power Connector: Standard IEC 320, male, recessed
Power Input 100 - 250 VAC, 47 to 63 Hz, auto ranging.
Power Consumption: 10 watts typical for a 4+2-port fiber model.
Mechanical
Enclosure High-strength metal (aluminum), case used as a heat sink .
Panel mounting Metal Mounting brackets (4) included.
DIN-Rail mounting order Model # DIN-Rail-MC2, optional.
Enclosure ingre protection ratings IP52, protects against dust particles and liquids per IEC 60529, and NEMA-3, 3X
Cooling method Convection case used is a heat sink, designed for vertical mounting, no fans.
Dimensions 6 in H x 5.5 in W x 1.7 in D (15.2cm H x14.0cm W x 4.3cm D)
Weight 1.5 est lbs. (.68kg)

 





General Description for the IPS42:

Any combination of ES42H and P Edge Switch models may be combined with any of five models of the Magnum IPS42 Internal Power Supply unit to yield a hardened Edge Switch unit configured with big-switch power input. These products are ready for reliable service in the harshest environments. For example, choose an AC/DC model of the IPS42 for 110VDC unit with IEC 61850 rating and maximum (4KV) surge suppression to complement any ES42 Series Edge Switch unit, ready for duty for power utility substations . . . the only such high-voltage AC/DC Ethernet unit (patent pending) on the market that is UL Listed for user safety. Or, use the AC model IPS42 along with a 48VDC PES42 model for a Power over Ethernet (PoE) Edge Switch unit that plugs into your AC power source. Also offered are high-availability IPS42 units with DC dual-source input at 125V, or 48V, or 24V.

ES42 Series models cover the broadest range of Ethernet edge connectivity. There are Hardened and Premium ratings for temperature extremes, even outdoors. There are all fiber port flavors at 100Mb, Dual-Homing for edge redundancy, Link-Loss-Learn for ring resilience, and PoE Power Source support for low cost installation of modern PoE industrial devices. All have relay alarm for input power-loss, IP52 rating, and are convection cooled (using the case as a heat sink) for use in dirty and dusty industrial environments.




IPS42 Features:

  • May be DIN Rail or Panel Mounted
  • For AC/DC models, 100 to 250V range, 4KV surge protected, dual-source optional
  • For 125VDC, 48VDC and 24VDC models, dual-source power input for high availability
  • Recessed terminal block with cover plate (patent pending) for user safety with high voltage (>60V) AC/DC.
  • For AC models, worldwide AC power with standard IEC 320 recessed male power plug
  • For all models, UL Listed and tested for safety
  • IEC 61850 rated for EMC and EMI, rugged metal case, IEC 60068 tested for extreme temperature, IEEE1613 for electric Power Substations.

 



IPS42 Diagrams:

IPS42 Pictures


To change the power cord, unplug incoming power to unit. Then, unscrew metal safety cover to expose terminal block, and unscrew incoming power wires from terminal block. Next, remove strain relief grommet and replace existing power cord with your new power cord. Finally, reinstall strain relief grommet, and reattach wires to terminal block and screw on metal safety cover.




Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized