« Back to Martin home

 Martin Swing out & Vertical Wallmount Enclosures: including Wall Patch Panel


Select Content:

   
Swing Out Wallmount Enclosures Wall Patch Panel Box Vertical Wallmount



Swing Out Wallmount Enclosures:

Innovative design to incorporate accessibility, convenience, and security. Specifically designed for space-constrained applications, mounts directly to building walls freeing up valuable floor space.




Martin International Enclosures welded aluminum extruded frame offers superior strength and versatility.

Features

Options

  • Designed and constructed to allow easy access to equipment from the front and the back
  • 19" rack-mountable spacing
  • Field reversible doors and body
  • Key locks for security in both front and rear of enclosure
  • Textured powder coat finish
  • Lexan® front door
  • Cantilever shelves
  • Panel mount exhaust fan
  • 19" rack-mountable power strip

Wallmount Frame Includes:

Inside Useable Dimensions

  • Patented aluminum extruded welded frame
  • Swing out locking body offers 14" useable depth and 4" deep wall section for a total of 18" depth. Top and bottom cable access, top and bottom intake and exhaust vents, (2) fully adjustable mounting rails front to back
  • Steel vented front door with swing handle lock
  • Standard EIA-310-D specifications for mounting rail hole spacing (5/8", 5/8", 1/2 ")
  • 20 pack of 10-32 nut clips and screws
Martin International Swing Out Wallmount Enclosures are available in 6 standard size combinations.
Height 24" or 42"
Width 19", 23" or 24"
Depth 14" Internal useable space of swing out body
Custom sizes, configurations and colors upon request.



Wall Patch Panel Box:

6U Wall Patch Panel Box with 1 pr. of vertical 1032 Tapped 12 Ga. mounting rails plated clear zinc, adjustable front to rear.

Click to view Technical Drawing

Features

Options

  • Box can be mounted to have the 19" pattern on the left or the right
  • Door can be mounted with lock on top in both cases
  • There is an adequate area adjacent the 19" rails to accommodate a 4" conduit and all of the cables in it.
  • WPPB is 13.00” high (6U of mounting space) 27.00” wide and 10.00” deep
  • Available in Black or Pearl White powder coat finish

Includes

  • (20) Pack of 10-32 starter point screws


PART # "A" "B" "C" RACKING HEIGHT/ RACK SPACE Top Cover Finish
VWM-4-30-L 3.73 25.73 3.50 7.0 / 4U LEXAN PW OR BLACK
VWM-6-30-L
7.47 26.42 7.00
10.5 / 6U LEXAN PW OR BLACK
VWM-8-30-L
11.24 27.54 10.50
14 / 8U LEXAN PW OR BLACK
VWM-4-30-S
3.73 25.73 3.50
7.0 / 4U SOLID STEEL PW OR BLACK
VWM-6-30-S
7.47 26.42 7.00
10.5 / 6U SOLID STEEL PW OR BLACK
VWM-8-30-S
11.24 27.54 10.50
14 / 8U SOLID STEEL PW OR BLACK



Vertical Wallmount:

Vertical Wallmount with 4U, 6U, or 8U of rack mount space and 30" of useable depth.

Features

Options

  • Allows servers and equipment to be mounted vertically to conserve space.
  • Mounting rails have M6 square holes.
  • Provisions for (2) 4-1/2" fans at the bottom with finger guards (fans not included).
  • Locking vented front swing out body and locking top access door.
  • Wall section has knockouts located on the top and bottom rear.
  • Available with Solid Steel or Smoked Lexan Access Door
  • Sizes Available - 4U, 6U and 8U
  • Available in Black or Pearl White powder coat finish, (1) or (2) 105cfm Fans

Includes

  • Top Cover Key # C390
  • Side Box Key # C420A
  • 10 Pack of M6 Hardware




Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized