EtherPower
10/100
Fast Ethernet PCI Network Cards
10BASE-T/100BASE-TX and
10BASE-T/100BASE-T4 Models

Please Note: Bomara maintains a limited supply of these discontinued products. Please call us (978-452-2299) or email bobr@bomara.com if you are interested.
Auto-Negotiation and Flash Boot ROM Support
Zero to 100 Mbps in 30 Seconds
SMC's EtherPower (tm) 10/100 network cards combine the flexibility
of dual-speed operation with superior performance and exceptional
ease of installation. In fact, installation in a NetWare client
takes only 30 seconds. With these cards, it's easy to future-proof
your network. Connect one to any 10BASE-T hub or switch and it
will operate at 10 Mbps. When you need the additional bandwidth
to support today's distrib-uted applications, simply connect it
to a Fast Ethernet device. The TX card supports the Auto-Negotiation
standard, so it is automati-cally configured to run at the highest
possible performance level (10/100 Mbps, half/full duplex). The
T4* card supports auto-speed detection which automatically senses
the speed of the attached device. (Note that no T4 devices operate
in full-duplex mode.) Performance of these PCI-bus network cards
is enhanced by incorporat-ing SimulTasking (tm) technology, SMC's
unique pipelined data transfer technique, with bus-master design
and very low CPU utilization. The result is improved network efficiency.
The EtherPower 10/100 cards come with a full complement of drivers
for all popular network operating systems, a lifetime warranty
and the industry's best, free Technical Support. This way, you
can be sure you're getting the highest possible product reliability
and value. For little more than the cost of our standard Ethernet
PCI card, the EtherPower 10/100 family gives you ten times the
performance!
Features/Benefits
Outstanding Performance
- SMC's unique SimulTasking pipelined data transfer technique
for top performance at both 10 Mbps and 100 Mbps
- Low CPU utilization
- Full-duplex operation at 10 Mbps for both cards and at 100
Mbps for TX card only
- 32-bit PCI bus-master operation
High Bandwidth
- 100 Mbps operation delivers improved application response
time
Easy to Install and Use
- Auto-Negotiation for automatic selection of data rate and
half-/full-duplex modes (TX card only)
- Auto-speed detection for automatic selec-tion of data rate
(T4 card only)
- Automatic NetWare client installation in 30 seconds
- EZStart (tm) utility simplifies driver installation and troubleshooting
- Diagnostic LEDs indicate half-/full-duplex modes (TX card
only), network and card status, and data rate
- On-board socket for optional Flash boot ROM with virus detection
Compatible
- IEEE 802.3, 802.3u and ISO/IEC 8802-3 standards
- 32-bit PCI bus, v2.1
Versatile
- Single RJ-45 connector for both data rates
Reliable
- Lifetime warranty
- FCC Class B certified
- CE marking
Support for Popular Network Operating Systems
- Novell NetWare: 3.x/4.x Server, DOS, OS/2, Windows 95 and
Windows NT Client
- Microsoft: Windows 95, Windows NT, Windows for Workgroups
and Windows 3.x
- Banyan VINES
- SCO UNIX
- IBM LAN Server
- MacOS System 7 (PowerMAC)
- AIX PowerPC
- Plus many other drivers available on SMC's Bulletin Board
Specifications
Connector
- Single RJ-45 for 10/100 Mbps
Network Interface
- 100BASE-TX
- Data grade UTP cable, 2 wire pairs
- EIA/TIA Category 5
- 100BASE-T4
- Voice grade UTP cable, 4 wire pairs
- EIA/TIA Categories 3, 4, 5
- 10BASE-T
- Voice grade UTP cable, 2 wire pairs
- EIA/TIA Categories 3, 4, 5
Weight
- 2.7 oz. (76 gm) (SMC9332BDT)
- 2.9 oz. (81.2 gm) (SMC9332BVT)
Size (without bracket)
- 3.2 in. x 5.35 in. (8.1 cm x 13.6 cm)
Diagnostic LEDs
- Network Activity
- Link Integrity
- Data Rate (10/100 Mbps)
- Full/Half-Duplex (SMC9332BDT only)
Bus Interface
Interrupt Channel
Temperature
- Operating
- 32° to 131° F (0° to 55° C)
- Storage
- -4° to 158° F (-20° to 70° C)
Humidity
Operating Voltage
- SMC9332BDT
- +5 VDC ± 5% @ 820 mA (typical),
- 1,160 mA (maximum)
- SMC9332BVT
- +5 VDC ± 5% @ 44 mA (typical),
- 628 mA (maximum)
Standards
- IEEE 802.3 Ethernet
- IEEE 802.3u Fast Ethernet
- ISO/IEC 8802-3 Ethernet
- PCI v2.1 compatible
Mean Time Between Failures (MTBF)
Compliances
- CE marking
- Safety
- UL 1950
- EN60950 (TÜV)
- CSA 22.2 No. 950 (UL)
- Emissions
- FCC Class B
- CDOC Class B
- EN55022 (CISPR 22) Class B
- VCCI Class 2
Warranty
* SMC developed and patented the 100BASE-T4 signalling method
which uses three wire pairs to transmit and receive data, and
the fourth wire pair to listen for collisions. (SMC's U.S. Patent
No. 5,544,323).
| Product |
Order Number |
Description |
| EtherPower 10/100 |
SMC9332BDT |
10BASE-T/100BASE-TX, single-pack |
| |
SMC9332BDT-05 |
10BASE-T/100BASE-TX, 5-pack |
| |
SMC9332BDT-20 |
10BASE-T/100BASE-TX, 20-pack |
| |
SMC9332BDT-50 |
10BASE-T/100BASE-TX, 50-pack |
| |
SMC9332BVT |
10BASE-T/100BASE-T4, single-pack |
| |
SMC9332BVT-05 |
10BASE-T/100BASE-T4, 5-pack |
| |
SMC9332BVT-20 |
10BASE-T/100BASE-T4, 20-pack |
| |
SMC9332BVT-50 |
10BASE-T/100BASE-T4, 50-pack |
| Accessory |
SMC-FROM |
Flash Boot ROM with Virus Detection |
|
SMC is a registered trademark of SMC Networks Inc.
Product names and company names are the trademarks of their respective
holder.
Copyright © 1999 SMC Networks Inc. All Rights Reserved.
|