Home
Servertech » Smart PDU » 3 Phase Modular Power Distribution

3 Phase Modular Power Distribution

3 Phase Modular -Servertech

The SentryTM Modular Cabinet Power Distribution Unit (PDU) family is designed to take a 3-Phase in-feed and distribute single phase power via Basic PDU's that can be placed anywhere in the cabinet rack.

Each Master and Expansion contains qty (3) LED amp meters for simple load balancing, one temperature/humidity probe input, serial connection, IP connection and exclusive link port to connect the Expansion Cabinet PDU for linking Cabinet PDU's on different power circuits together.

For ease of installation, each Basic unit comes with a detachable connector with a strain relief. Basic units are available with a variety of outlet and cord length options.  Branch circuit protection is provided within each Basic Cabinet PDU.

Sentry Cabinet PDU Specifications
Item # Available Input Voltages Rated Amperage Available Input Cord Dimensions(L x W x D)
3 Phase Module Power Distribution Specifications
Master Modular 3-Phase Cabinet PDUs
CS-3VD-L304/S1 3-Phase Delta, 208V
50/60Hz
30A NEMA L15-30P
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CS-3VY-L304/S1 3-Phase Wye, 208V
50/60Hz
30A NEMA L21-30P
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CS-3V4-P324/S1 3-Phase Wye, 400V
50/60Hz
32A IEC 60309
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CS-3VD-604/S1 3-Phase Delta, 208V
50/60Hz
60A IEC 60309
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CS-3VY-P604/S1 3 phase Wye,
208V
50/60Hz
60A IEC 60309
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
Expansion Modular 3-Phase Cabinet PDUs
CL-3VD-L304/S1 3-Phase Delta, 208V
50/60Hz
30A NEMA L15-30P
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CL-3VY-L304/S1 3-Phase Wye, 208V
50/60Hz
30A NEMA L21-30P
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CL-3V4-P324/S1 3-Phase Wye, 400V
50/60Hz
32A IEC 60309
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CL-3VD-604/S1 3-Phase Delta, 208V
50/60Hz
60A IEC 60309
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CL-3VY-P604/S1 3 phase Wye,
208V
50/60Hz
60A IEC 60309
Cordset, 6' (1.8m)
13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
Outlets
Select any combination of three Basic Satellite Cabinet PDUs(See Table Below)

 

Basic Satellite Cabinet PDUs - distribute power from Master or Expansion Cabinet PDUs
Item # Available Input Cord Amperage* IEC C13 Outlets IEC C19 Outlets Dimensions(L x W x D)
CB-4V2-A303/S1
CB-4V2-A303/S2
CB-4V2-A303/S3
CB-4V2-A303/S4
18" (.45m) cord
36" (.91m) cord
54"(1.4m) cord
72"(1.8m) cord
32A ---  

(4)

13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CB-8V2-A30A/S1
CB-8V2-A30A/S2
CB-8V2-A30A/S3
CB-8V2-A30A/S4
32A (6) (2) 13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CB-8V2-A30B/S1
CB-8V2-A30B/S2
CB-8V2-A30B/S3
CB-8V2-A30B/S4
32A (4) (4) 13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)
CB-10V2-A30/S1
CB-10V2-A30/S2
CB-10V2-A30/S3
CB-10V2-A30/S4
32A (10)
(10)
(10)
(10)
--- 13.7 x 1.73 x 4.76 in
(347 x 44 x 121 mm)

Additional Features and Specifications

Standards
> cTUVus - UL 60950-1-2003
> CAN/CSA 22.2 No. 60950-1:2003
> TUVGS - EN 60950-1:2001
> FCC Class A, Part 15
> CE
> EMC-EN 55022 Class A, EN 55024
> EMI

Communications
> 10/100 BaseT Ethernet
> HTTP/HTTPS
> SSLv3/TLSv1
> SNMPv2
> SSHv2
> Telnet
> LDAPv3/LDAPS
> TACACS+
> RS-232 (Serial)

Branch Circuit Protection
> Compliant to UL 60905-1

Accessories
> Temperature & Humidity Probe
    - EMTH-1-1 Temperature & Humidity Probe, 10 ft (3 m)
    - EMCU-1-1 add 2 additional Temperature & Humidity ports, 4 contact-closure monitoring ports and
      1 water sensor port

 

Remote Power Monitoring

Monitor input power via IP or serial interface.

HTTP/HTTPs Web Configuration & Control

Use the Sentry Web interface to configure each unit, including network settings, outlet naming & grouping, SNMP traps for environmental & power thresholds and firmware updates. Also use the Web interface to control individual or group Outlets and monitor key values, including amperage load(s), temperature/humidity and other environmental conditions. SSL security provides a secure HTTPs connection.

SNMP Management & Event Notification

The Sentry family of products supports the Simple Network Management Protocol (SNMP). This allows network management systems to use SNMP requests to retrieve information and control power for the individual Outlets. The Sentry includes an SNMP v1 agent supporting standard MIB I and MIB II objects. A private enterprise MIB extension (Sentry3 MIB) is also supported to provide Network Access power control. SNMP traps can be generated for various events, including Input Current Load Thresholds (min & max), Temperature Thresholds (min & max), Humidity Thresholds (min & max), water indication, closed contacts (cabinet doors open/close), as well as notification of any time an outlet status is changed (on/off).

Add a Second Tower

Connect an Expansion Cabinet PDU to any Switched Cabinet PDU to control two power input circuits and manage Outlets (individual or groups) under 1 IP address - our exclusive strategy for managing dual power-supply servers.

Zero U Enclosure

A vertical enclosure that occupies Zero Vertical U of rack space in the equipment cabinet. It mounts on the back rails or in the cavity space of the cabinet.

Secure Access - SSH or SSL Protection

Secure Shell (SSH), known as Secure Socket Shell, is a Unix-based command interface and protocol for securely getting access to a network device.  Sentry supports SSHv2. Secure Sockets Layer (SSL) is a commonly-used protocol for managing the security of a message transmission on the Internet. SSL is an integral part of most Web browsers (clients) and Web servers.  Sentry supports SSLv3/TLSv1.

Integrated Temp/Humidity Probes

Two (2) RJ-style connectors located on the face panel of the PDU's enclosure provide support for two (2) Integrated Temperature & Humidity Probes with ten-foot (10') cables provide real-time measurements in the data center cabinet.

Firmware Flash Upgradable

Access new firmware updates via FTP for new firmware features and code releases. An update to the firmware does not affect the status of the power Outlets.

LDAP/LDAPS

The sentry family of products supports Lightweight Directory Access Protocol (LDAP) Version 3 including LDAPS (LDAP over TSL/SSL). This support enable authentication with LDAP servers; user accounts do not need to be individually created locally on each Sentry device.
This allows administrators to pre-define and configure (in each Sentry product, and in the LDAP server) a set of necessary LDAP groups, and access rights for each. User's access rights can then be assigned or revoked simply by making the user a member of one or more pre-defined Sentry LDAP groups. User account can be added, deleted, or changed in the LDAP server without any changes on individual Sentry products.
Sentry LDAP support has been tested in the following environments:
  - Microsoft Active Directory (MSAD)
  - Novell eDirectory (eDir)
  - Open LDAP

Load Sense

individual input current monitoring ("Load Sense") provides real-time power measurement of the load in amps on each power inlet, accessible via firmware interface.

RS-232 Control

Serial control via any device with a bi-directional serial port, including a PC, laptop, KVM switch, Console Port Access switch, or terminal server.

24-Character Outlet Receptacle Names

Use the firmware interface (Web or serial) to edit individual outlet receptacles. Identify each receptacle with the device's serial number, IP address, asset allocation #, department or any other method to individually name Outlets.

 



Server Tech Home Bomara Homepage Request Information

Bomara Associates Phone: 800.5BOMARA (800.526.6272) Phone: 978.452.2299 Fax: 978.452.1169 3 Courthouse Lane, Chelmsford, MA 01824 USA
Phone: 800.5BOMARA (800.526.6272)

Phone: 978.452.2299

 

Fax: 978.452.1169

Email: bobr@bomara.com

  Web: www.bomara.com

3 Courthouse Lane, Chelmsford, MA 01824 USA
Serving the marketplace for over 40 years

© 2014 by Bomara. All rights reserved

 



First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me