• Synchronous & Asynchronous Modes
• Total Isolation up to 2000 V
• Full Duplex
• Drives Signals up to 750 ft
  at 38.4 kbps
• 115.2 kbps Maximum Data Rate

Product Description

The Model 288 RS-232 Total Interface Isolation Module delivers complete full-duplex electrical isolation between two RS-232 devices in both asynchronous and synchronous modes. For applications in which clock signals are required, the Model 288 provides additional clock pins to keep data flows properly synchronized between two connected devices.

Isolation is critical to maintain data accuracy by eliminating signal noise and protecting equipment against damage from electrical surges and differences in ground current voltages. The Model 288 achieves total electrical isolation for up to 2000 V through the use of independent opto couplers.

Using industry standard DB-25 male connectors (for DTE port connections to DCE devices such as a dial-up modem) and female connectors (for DCE port connections to DTE devices such as a terminal or PC), the Model 288 drives RS-232 signals up to 750 ft over copper cable at speeds up to 38.4 kbps. The unit's maximum data rate is 115.2 kbps, allowing it to perform reliably in even high-data-rate applications.

Powered by a wall-mounted 110 VAC transformer, the unit is equipped with a built-in isolated DC-to-DC converter that provides operating current for both the DTE and DCE sides of the Model 288.