Remote Controlled RJ-45 Fallback Switch

NetReach™ Model AFS-16

Applications:

· Remote routing of Ethernet UTP lines
· Active or fallbackgang switching
· Disaster recovery switching
· Switch to "out-of-service"or "off-line" conditions

Features:

· Independent RS-232 command port
· Control via modem orterminal server
· Signal monitoring for auto switching
·Mechanical contact for analog or digital switching
· Switching of all8 RJ-45 conductor

Network disasters are impossible to predict, but can be effectivelycontrolled with the AFS. It's job is to closely monitor activity on primaryhardware lines. In the event that the line changes state, the AFS quicklyresponds and re-routes data signals to a backup line. Your lost data anddowntime is cut to a bare minimum.

The system is designed for applications that require automatic routing ofanalog or digital signals between a common jack and an A and B jack. It is idealfor switching RS232, RS422/485, Ethernet/UTP or telephone lines.

The system consists of a Card Rack, a plug-in Power Supply Module, andRS-232 Command Port Card and up to 16 Switch Cards. Each card is capable ofswitching all 8 pins of a common RJ45 jack between jacks "a" and "b".Each card can be switched manually or by command. The RS-232 command port can beconnected to a modem to enter set-up parameters, execute switching commands orview status of the unit's parameters from remote sites.