RJ Adapters & Cables (for CPM/MDS Units)
There are several Western Telematic units which use RJ-12 interfaceconnections
(same size as RJ-11 jacks, but with 6-conductor cable). TheRJ interface
allows for inexpensive modular cable runs, and also allowsmost WTI units
to occupy only a single rack unit (1.75" High x 17"Wide)
Important Technical Diagrams:
WTI Units which use the RJ-12 Interface:
CPM-400 4-Port Remote Site Control Port Manager
CPM-800 8-Port Remote Site Control Port Manager
CPM-1600 16-Port remote Site Control Port Manager
CPM-6400 8 to 64-Port Remote Site Manger &Data
Matrix Switch
MDS-8 8-port any-to-any data matrix switch
MDS-16 16-port any-to-any data matrix switch
The following adapters with part numbers SA-NN are DB-9 or DB-25 toRJ
adapters. They allow the user to convert their standard DTE or DCE portsto
the RJ interface, then use standard 6-conductor RJ cable between theadapter
and the RJ port on the WTI unit. Adapter part numbers include Mor F indicating
the gender on the SA-NN adapter itself. For example, toconnect from a
DB-9M Standard PC COM port, you would require an SA-9F adapter.
DB-9/DB-25 to RJ Adapters and Cables:
SA-9F RJ Adapter for DB-9M COM Ports or other DTE Devices
SA-9M RJ Adapter for DB-9F molded cables (eg. router-to-pc cables)
SA-12F Adapter for DB-25M COM Ports or other DTE Devices
SA-12M Adapter for DB-25F COM Ports or Standard DTE "Dumb"Terminal
Ports
SA-25M Adapter for DB-25F DCE (Modem) Ports or other DCE Equipment
SA-28F 9-Pin Female DCE Adapter
SA-20M 9-Pin Male DCE Adapter
AC-15 15ft RJ Cable AC-25 25ft RJ Cable
AC-50 50ft RJ Cable AC-100 100ft RJ Cable
Misc. RS-232 Cables:
MC925-1 Modem Cable; DB-25 to DB-9 1ft
MC925-6 Modem Cable; DB-25 to DB-9 6ft
MC925-10 Modem Cable; DB-25 to DB-9 10ft
NC-9F9F DB-9F to DB-9F Null Modem (Crossover) Cable, 6ft
NC-925-6N DB-9F to DB-25M Null Modem (Crossover) Cable, 6ft
RJC-1145-15 Cisco 2500 RJ-45 Console or AUX Port to CPM-800/1600/6400-
15ft.
RJC-PRDN-15 Paradyne DSU/CSU RJ-45 Console to CPM-800/1600/6400-
15ft
|