Remote Console/AUX Port Management Switches

NetReach™ CPM-Series 4-Port Managers

Applications:

· Remote Console/AUX port switching
· Out-of-band network management
· Remote site RS-232 port switching
· Share a modem line at remote site
· Access RS-232 control ports from a single terminal

Features:

· 19" Rack MountVersion (DB-9 Interface)
[ Technial Specifications ]
· Stand Alone Version (RJ-Interface)
[ Technical Specifications ]
· Password Protection
· Any-to-Any port switching
· Data rate/speed conversion (300 to 384.K)
· No software required (VT100-type terminal controlled)
· Menu-driven set up and control commands
[ View CPM-400 Status Screen ]

· Also available in 8 or 16 port models& 8-to-64 port model

Network managers now have a cost-effective way to control network hardware without costly SNMP in-band restrictions. The CPM series of RS-232 console port switch allows both on-site and dial-up remote communications with any equipment designed with an RS-232 command port. This can eliminate the need to travel to equipment closets or worse yet, to remote sites. Even when the network is down, the CPM allows out-band communications with your control ports via POTS line and modem.

The CPM units are electronic data switches with individual port parameters, so communicating with ports of dissimilar baud rates is possible. Each port can be assigned a name (ie "ROUTER_1 or SERVER_NNN) to simplfy your remote access to your control ports. Password protection prevents unauthorized entry, and all parameters are stored and protected in non-volatile memory. The CPM series comes in 115 and 230V models, and are 19" rack ready. The CPM is also available in 8 and 16-port models, and our newest addition to the CPM family is our CPM-6400 unit, expandable to 64 ports.
CPM RJ-to-DB-9/25 Cable & Adapter Information

WTI Part Numers:
CPM-400R Rack Mounted 4-Port Control Port Manager (DB-9M Interface) [ Technical Specifications ]
CPM-400 Stand Alone 4-Port Control Port Manager (RJ Interface) [ Technical Specifications ]