• Control Power on any AC Powered Device via Internet, Web Browser, Telnet, Modem or Local Terminal
• Remote Power Management and Control
• Reboot Servers, Routers, Web Cams, Firewalls and Other Remote Devices

Features:

• Reboot via In-Band and by Out-of-Band via Internet
• Web Browser Access for Easy Setup and Operation
• Encrypted Password Security
• Expandable to Five (5) Individual Outlets
• Each Outlet can Switch a 15 Amp Load
• On / Off / Reboot Switching
• IP Addressed, 10Base-T Interface
• RS232 Modem / Console Port
• Network Security Features
• Manual Power Control Button
• View Detailed Technical Specifications

• IPS-15M - Master Control Unit, 115 VAC @ 15 Amps:   $345
• IPS-15S - Satellite Unit, 115 VAC @ 15 Amps:   $195
• IPS-15R - 19" Rack Mount Tray, 1 RU:   $35
  (Mounts Master Unit and Two Satellite Units)
• IPS-15ZU - Zero Unit Mounting Bracket:   $15

Servers, routers, and other electronic equipment sometimes "locks-up," often requiring a service call to a remote site just to flip the power switch to perform a simple reboot. The IPS-15 Internet Power Switch gives you the ability to perform this function from anywhere, just point your browser to the IPS-15's IP address, enter the secure user name and password, and you're just a click away from remote power On, Off or Reboot!

Two Convenient User Interfaces
The IPS-15 provides two convenient methods for accessing configuration and switching functions; The Web Browser Interface and the Command Line Interface.

The Web Browser Interface consists of a series of simple, easy-to-use web page menus that allow you to select configuration parameters or initiate switching operations using your TCP/IP network and a JavaScript enabled web browser.

The Command Line Interface is an ASCII menu system, which allows you to configure and operate the IPS-15 via telnet over TCP/IP network, via modem connection or via local PC using a terminal program such as Hyperterminal or TeraTerm.

Expandable, Flexible Design
The IPS-15 Master Unit can be linked to four optional, low cost satellite units for a total of five individually controlled outlets. This allows the IPS-15 to easilly grow to fit the requirements of your power control application.

Flexible mounting options are also available. A Zero U rack bracket lets you mount the IPS on the outside of a standard 19 inch rack rail. A 1U rack tray allows mounting one main unit and two satellite units in a 19 inch rack.

Security Features
Access to the IPS-15 command mode is password protected to prevent unauthorized users from gaining access to sensitive switching and configuration functions. Both the Web Browser Interface and Command Line Interface require the user to enter a password before allowing access. Passwords transmitted via web browser use 64-bit encryption techniques to ensure that passwords remain protected and access to your equipment remains secure. Telnet control can be user-defined to a discrete TCP port, or completely turned off to ensure that no unprotected port is present.

The IPS-15 also features two different levels of operational passwords; the System Administrator Level and the User Level. The System Level provides access to all configuration and switching functions, while the User Level is limited to switching functions only.

Easy to Configure, Easy to Use
The IPS can be configured via network, via modem, or locally via the serial console port. Easy to master, user-friendly menus and commands let you assign a location name, set system parameters and view plug status. Outlets can be switched On, Off, or booted using plug numbers or names.

Reliability and Support
The IPS is built in the USA and backed by a two year warranty. NetReach products are installed in thousands of network sites world wide. Our customers know they can depend on WTI for superior quality and reliability for their most mission-critical operations.