|
|
NetReach
Model NPS-230
Features:
Network equipment sometimes "locks-up" requiring a service call to a remote site just to flip the power switch to perform a simple reboot. The NPS-230 network power Switch gives network administrators the ability to perform this function from anywhere on the LAN/WAN, or if the network is down, to simply dial-in from a standard external modem for out-of-band power control. The NPS-230 can be controlled over any TCP/IP network using generic Telnet, or out-of-band by using an external modem and basic VT100 type terminal emulation. Each independent outlet can be switched ON, OFF or Booted (OFF- delay-ON). Each outlet can also be assigned an individual password, device name, reboot delay time and unique power-up default state. Security
and Co-Location Features The NPS-230 employs address-specific IP security authorization to prevent unauthorized sources from entering the NPS command mode. Two levels of operational passwords are also available; the system administrator level, and individual user level. The user-level security features are ideal for co-location applications where multiple users may be allowed plug-specific access to the NPS unit. Dual Power
Bus Flexibility The NPS-230 is equipped with two separate 10 Amp power circuits. Each
bus has it's own source AC inlet, circuit breaker and 4 switched outlets.
This allows for switching redundant A/B power supplies or switching
devices with high current requirements. |
| Request
Information |
email: bobr@bomara.com web: www.bomara.com
![]()