Remote Power Reboot Switch

NetReach™ Model RPB-115, RPB-220

Applications:

-Reboot network servers, routers & gateways
-Remote power reset of communications equipment
-Reboot telecommuncations equipment

Features:

-All metal construction
-RS-232 DB-9 control port
-ASCII code control of each AC plug
-Selectable short and long OFF delay

Flip the power switch from anywhere using the NetReach™ remote power bar RPB-115 or RPB-220. It’s simple-to-use design allows you to reset the power to any AC-powered equipment that is plugged into one of five AC outlets. Each outlet is individually controlled so that when one device is locked up, it can be reset without disturbing the rest of your network.

The RPB-115 and RPB-220 are RS-232 controlled using simple ASCII commands, which means that you can connect it to a PC, terminal, modem or terminal server or any RS-232 device capable of sending and ASCII command string. An 8-character string is all that is required to toggle the power to one or all 5 of the AC outlets. The command string consists of a password, outlet number and carriage return. On command the outlet turns off , and after a selected delay period, turns the power back on. Now you can reset equipment from anywhere!

General Specifications:

Switched Outlets: RPB-115- 5 Plugs, each rated at 115VAC
Total load for all plugs not to exceed 10 Amps
RPB220- 5 Plugs, each rated at 220VAC (universal style plugs)
Total load for all plugs not to exceed 5 Amps
Control Port: 1 DB-9 male DTE Configuration
1 RJ11 jack, for control via WTI Control Port Manager
Data Rate: 300,1200,2400,9600 bps, switch selectable
Command String: 8 contiguous characters, first 6 are ASCII control codes the seventh is an operational code followed by carriage return
Size: One rack unit: 1.75”H x 19”W x 6.5”D