NetReach Model RPC-230
High Amp AC Power Control

Applications:

• 30- Amp AC Reboot & Power Control
• Reboot Routers, Telecom & Datacom Equipment
• Remote Reset of Any AC Device
  

Features:

• Password Protection
• User Programmable Circuit Name
• Status Display Shows Plug Name
• VT-100 Terminal Controlled via Modem or Terminal Server
• RPC-230 Main Status Screen
• Detailed Technical Specifications

Router and communications equipment sometimes "locks-up" and must be re-booted in order to come back on line. This often requires a trip to the installation site, simply to flip the power switch off and then back on. When distance makes this costly or time consuming, WTI's Remote Power Controller can be connected to a modem, terminal server or other communications device, to literally switch power off and back on from anywhere.

The RPC-230 will accept loads up to 30 amps; supporting the power requirements of most high-amp AC network equipment with power capacity to spare.

General Specifications:

• Modem/Console Port Interface: DB9M, DTE Configuration
• Maximum Load: 30 Amps Maximum
• Data Rate: 2400 or 9600 bps
• Size: 3 in. x 19 in. x 6.5 in. (H x W x D)
  (23 Inch Rack Brackets Available)
• Detailed Technical Specifications

Phone: 800.5BOMARA (800.526.6272)

Phone: 978.452.2299

Fax: 978.452.1169

3 Courthouse Lane, Chelmsford, MA 01824 USA


© 2012 by Bomara. All rights reserved