Heavy Duty Remote Power Reboot Switch
NetReach Model RPS-10HD
Now With High-Amperage Solid State Relays!
-Remote control of large servers
-Switch up to 15 amps @ 115VAC
-Reboot CNC or robotics equipment
-Control remote climate control equipment
-Expandable master-satellite configuration
-End-to-end link distance of 2,000ft
-RS-232 control via modem or terminal server
Network equipment sometimes "locks-up, requiring a trip to flip the power switch off and then back on. This can be done remotely and with the Heavy Duty version of the Western Telematic's Remote Power Switch, it can be done on any device that does not exceed 15 Amps.
The RPS-10-HD works like the other light duty units. It is controlled by a password and control string that tells the unit to remove the power temporarily to reboot a device or turn it off until it is turned back on again.
The RPS-10-HD can be rack-mounted or distributed throughout the facility for better control of 115 VAC. equipment. A status report will even provide the system operator with the status of each switch.
RPS-10M-HD: Remote Power Switch, Master Unit - 15 Amps 115V
RPS-10S-HD: Remote Power Switch, Satellite Unit - 15 Amps 115V
Switched Outlet: 1 Plug, Rated at 15 Amps Max @115VAC
Control Port: RS-232, DB9M Connector, AT/DTE Configuration
( Only on the Master Unit
Link Port: RS-485, Dual RJ11 jacks, 2000 feet End-to-End Distance
Data Rate: 2400, 9600 bps (Switch Selectable)
Power: Internal 115 VAC, 60 Hz -15 Amps max. load per module
Size 1.65" X 5.50" X 5.0" (HxWxD)
Rack Tray Optional: 19" Rack holds up to 3 modules
Weight: 2 lbs Shipping Weight