SPC820 Power Control Device

SPC Family requires no software to operate. However there is a GUI package available - DSView 3 Software. The DSView® 3 management software interface lets you easily associate server names with actual power outlet ports on the SPC power control device. DSView 3 software also allows grouping of dual-server power supplies as well as separating the power supplies on different power sources. This gives you true redundancy and control of dual-powered servers.

Note: DSView 3 software is sold separately.

• Intelligent Power Management. Individual, addressable power outlets let you remotely reboot devices from any location in the data center or across the globe
• Integrated Power Management. Access to SPC power control device from DSView 3 software provides built-in support for servers with multiple power supplies and reduces the possibilities of inadvertently switching off the wrong server / target device
• Higher Amperage. The SPC 208V @ 30 Amp version doubles the power load delivered to the rack without increasing electrical infrastructure
• Ease of Use. Available in horizontal and vertical mountable 8 outlet models. (Also available in 4 and 16-outlet models, with configurable port grouping and naming, multi-port commands and enhanced administration)
• On / Off Power Indicators. DSView 3 software lets you easily view the SPC devices power outlet on / off status without entering the server room / data center
• Power-up Sequencing. Avoids branch circuit overload due to inrush current on powering-up the SPC appliance
• Naming Associations. Users can create an association between a server name and specific SPC outlet port(s)
• Redundant Power Supply Configurations. Single connect and click power control of dual / multiple target devices that are powered from independent branch circuits / power sources
• Power Monitoring. Dynamically measures and reports total input current load and indicates on / off state for every port
• Security. In addition to port specific and command specific access control, the SPC power control device provides advanced user authentication and data encryption when combined with the Avocent CPS appliance
• Energy Efficient. Power-on sequencing eliminates inrush current overload, which lets you maximize the number of devices on a single circuit
• Click and Connect Access. When used with the Avocent DSView 3 software interface, the SPC device lets you access power to virtually any connected data center device
• Local and Remote Power Load Measurement. Lets you hot plug additional SPC power control devices without the risk of overloading the branch circuit

				Vertical	Horizontal 2U
Mechanical		Height		41 in (104.14 cm)	1.75 in. (4.45 cm)
		Width		2.40 in. (6.09 cm)	17 in (43.18 cm)
		Depth		1.75 in. (4.45 cm)	8 in (20.32 cm)
		Weight		9 lbs. (4.1kg)	9 lbs. (4.1kg)
Environmental		Operating Temp		5F (-15C) to 131F (55C)
		Storage Temp		40F (-40C) to 185F (85C)
		Relative Humidity		10% to 90% non condensing
Power		Operating Voltage		100-120V or 208-240V	100-120V or 208-240V
		Power Frequency		50/60 Hz	50/60 Hz
		Input Power		20 & 30 Amp versions (maybe de-rated to 16 & 24 Amp depending upon local safety agencies)	20 & 30 Amp versions (maybe de-rated to 16 & 24 Amp depending upon local safety agencies)
		Power Outlets		NEMA 5-20R, 100-120V IEC 60320/C13, 208-240V	NEMA 5-20R, 100-120V  IEC 60320/C13, 208-240V
Supported Hardware		Computers		N/A	N/A
		Monitors		N/A	N/A
		Peripherals		N/A	N/A
Standards		Approved Agency		US & Canada (cTUVus & FCC mark), European Union (CE), Germany (GS), Japan (VCCI)