AB-32 - ASYNCHRONOUS RS-232 SIGNAL BOOSTER

For Unshielded Twisted Pair (UTP) Terminal Networks

DESCRIPTION
The AB-32 is normally used at a distant terminal or PC to regenerate the return RS-232 signal back to the POLLED RS-232 device, or other asynchronous RS-232 modem sharing devices. It is used when the standard RS-232 driver in the terminal cannot drive the return distance because of extended cable distance. They may also be used in pairs as 3-wire asynchronous short haul modems.

The AB-32s employ CPS's "Super Serial Driver". It can accommodate RS-232 signals up to 2000 feet over Unshielded Twisted Pair cable.

The unit can be equipped with male or female DB-25 connectors and RJ-11 or RJ-45 connectors. LEDs on the unit monitor the Transmit and Receive data signals.

NOTE: The FEMALE DB-25 connectors are pinned as DCE for direct connection to terminals and the MALE DB-25 connectors are pinned as DTE for direct connection to modems.

USE ON THE FOLLOWING RS-232 NETWORKS

• Asynchronous Point to Point
• RS-232 Signal Regeneration
• RS-232 Signal Driver

SPECIFICATIONS

AB-32
DB-25 Female/RJ-11
Item No CEX-AB32-F-11  Price $79.00

DB-25 Male/RJ-11
Item No CEX-AB32-M-11  Price $79.00

DB-25 Female/RJ-45
Item No CEX-AB32-F-45  Price $79.00

DB-25 Male/RJ-45
Item No CEX-AB32-M-45  Price $79.00

Physical    2" W x 3" D x .75" H, .75 lbs.
Connectors  (1) RJ-11 or RJ-45,
            (1) DB-25 Male or Female
LEDs        (3) Power, Data
Switches    None
Bell        None
Cable       None
Adaptor     None
AC Power    Wall Mount 9VAC 1A, 115V/60Hz