CPS » Telephone Line Sharing » FTS-3

FLEXIE TELCO SWITCH (FTS-3)

Click here for 8 port model

 

PROGRAMMABLE REMOTE PORT SELECTION and CONTROL

 

 

FTS Picture

 

SAMPLE BASE UNITS
ARR Picture

Intelligent AC Power Strip

PC-RJ Cable Interface Assembly Picture

PC-RJ Cable Interface Assembly

  More Remote Reboot AC Power Control Products...

APPLICATION DIAGRAM

FTS Application Diagram


DESCRIPTION

  • Local and Remote Programming
  • Secure Passwords Up to Six Digits
  • Abort Non-Password Calls or Transfer to Default Port
  • Transparent to Normal Voice Calls
  • Auto FAX Recognition
  • Use any Touch-Tone Phone or Modem
  • Disable Outbound Calls
  • Disable Answer
  • Outbound Priority Interrupt
  • Outbound Line Sharing
  • Remote AC Power Cycling
  • Remote Reset Button Control
  • Remote Modem Enable/Disable Control
  • Eliminates Additional TelCo Lines

Introduction
The Flexie Phone Switch (FTS) is aptly named because it can be used for a very wide range of remote control applications from remote maintenance access to simply calling a PC to download data, or even controlling access to remote modems (Enable/Disable). With the optional AC power strip, the AC power can also be controlled from a remote location or a PC can be reset via the reset button.

FTS incorporates many of the functions found in many of CPS's larger products, but in a smaller less costly package.

The FTS can be connected to its own dedicated telephone line or be shared with an established phone or fax line when only occasional use is required. It answers the line and presents a false ring to the caller while it carries out the caller's port selection and other control commands.

The caller can enter the port switching and control commands through any Touch-Tone cordless, cell or wire-line phone. They may also be appended to a modem's AT dial command. Up to a 6 number password may also be designated. It can be easily changed locally or remotely.

The two alternate "switched" ports may have modems, faxes or any standard analog devices connected to them. Calls without the proper access code may be aborted or switched to the "Default port" in the sharing mode. By enabling the automatic fax recognition feature, calls may also be automatically switched to a fax machine. All of these features are under program control. A power failure results in all lines being connected through.

Outbound Line Sharing
FTS can also be used as a sharing switch for outbound calls. Any of the devices on the three ports can bid for the telephone line, if available. All other stations are isolated when the line is in use. A PRIORITY Interrupt feature is also available. It disconnects any call in progress and presents a dial tone to the requesting device. This may be used for equipment that places alarm calls. Or all outbound calls may simply be disabled.

Programming
The unit can be programmed locally or remotely, using a standard Touch-Tone phone.

Optional AC Power and Reset Control
Each of the ports can also support an optional CPS Base Unit that can be remotely controlled through additional Touch-Tone commands.

The optional Intelligent AC Power Strip has six AC outlets. 2, 4 or 6 of those outlets may be designated as "controlled outlets" at the time of order. The others may be used as "normal" AC power strip outlets.

This can be used in maintenance applications to recycle the power on equipment that may be hung or simply to power up a PC or a modem for remote access.

Similarly, the two alternate ports can connect to the reset pins on the PC's motherboard enabling the caller to reset the PC from the remote location. An optional PC-RJ Cable Assembly is required for each PC.

NOTE: For products in this functional category see following products:

 

MRS Modem Router Switch
MSS-2C Modem Selector Switch
CAS Controlled Access Switch
RRU Remote Reset Unit
K-RRC Key-Based Remote Reboot Controller
SP-RRC Single Port Remote Reboot Controller
3P-RRC Three Port Remote Reboot Controller
MP-RRC Multi Port Remote Reboot Controller


SPECIFICATIONS

FLEXIE TELCO SWITCH (FTS)
Item No SWTFTS         Price Contact Bomara 

Physical    4.5" W x 3" D x 1.25" H, 1.5 lb.
Connectors  (4) RJ-11 TelCo
LEDs        (5) Power, Mode
Switches    (1) 4-Bit Dip, (1) Pushbutton
Bell        None
Cable       (1) 5' RJ-11 Phone Cable
Adaptor     None
AC Power    Wall Mount 9VAC 1A, 115V/60Hz

NOTE: For 220/50Hz., add (-INT) to the Item No


------ NON-ADDRESSABLE BASE UNITS ------

OPTIONAL INTELLIGENT AC POWER STRIP
2 Controlled and 4 "Normal" Outlets
Item No SWTAC6-A2-2x4       Price Contact Bomara

4 Controlled and 2 "Normal" Outlets
Item No SWTAC6-A2-4x2       Price Contact Bomara

6 Controlled Outlets
Item No SWTAC6-A2-6x0       Price Contact Bomara

Physical    12" W x 2.5" D x 1.5" H, 2 lbs.
Connectors  (2) RJ-11 TelCo/Control,
            (6) AC Receptacles
LEDs        (1) Surge Protection
Switches    (1) Main Toggle On/Off
Bell        None
Cable       (1) 5' RJ-11 Phone Cable
Adaptor     None
AC Power    115V/60Hz, 15 Amps

NOTE: For 220V/50Hz, see the IPC.


OPTIONAL INTERNATIONAL POWER CONTROLLER (IPC)
See the IPC


OPTIONAL PC-RJ CABLE INTERFACE ASSEMBLY
Item No CAPC2-RJ            Price Contact Bomara

Physical    5.5" W x 2.5" D x .75" H, .25 lbs.
Connectors  (1) RJ-11 Interface,
            (4) PC Headers Pins
LEDs        None
Switches    None
Bell        None
Cable       (1) 2' M/F Reset Switch Cable,
            (1) 2' F/F Motherboard Reset Cable,
            (1) 5' RJ-11 Cable
Adaptor     None
AC Power    None


OPTIONAL RELAY BOX
See the Relay Box


-------- ADDRESSABLE BASE UNITS --------

OPTIONAL A/B, MATRIX or X2 SWITCH
See the AB-M


OPTIONAL INTELLIGENT AUTO PUSH BOARD (I-APB)
See the APB


OPTIONAL INTELLIGENT POWER NODE (IPN)
See the IPN
      



Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized