Need Help? Call Us
Need Help? Call Us
|CPS » Remote Reboot Switches AC Power Control » IPN|
IPN - Intelligent AC Power Node System
The IPN system is a truly flexible system that allows control of multiple Intelligent AC Power Nodes anywhere in the world. Whether the application ranges from resetting the power on different machines to securing the AC power to all of the PCs in an entire building, locally or remotely, the IPN system can be configured to meet your specific requirement.
It uses standard internationally available parts and connectors (IEC 320-C 13 & 14) that make it easy to install virtually anywhere in the world with locally available PC power cords and adapters. It can be used on 100 VAC through 250 VAC mains.
There are two methods of connecting multiple IPNs. They can be daisy-chained using the RJ-11 "TelCo" and "Modem" ports as upstream and downstream connections or configured in a star topology using an IPN HUB.
Either cabling method supports connection to a Touch-Tone Controller, the Web-Based Controller or a PC serial port as the controlling device.
TOUCH-TONE CONTROLLERS (SP-RRC and 3P-RRC)
The Touch-Tones can be entered from any Touch-Tone Key pad or appended to a modem's AT dial string, even though there may be no answering modem.
The Controllers also offer password security up to six numeric digits and can share the line with other normal voice, fax or modem activity. They are also Touch-Tone programmable.
TOUCH-TONE CONTROLLER COMMANDS
A typical control string to recycle power on device 15 might look like:
If this were appended to an AT dial string it would look like:
DIRECT SERIAL PORT CONTROL
The control commands can be entered using Hyperterm for direct serial port or modem connections (A). Serial Net, a Telnet to serial utility can be used if LAN or Internet control is required. It runs on the local "control PC", considered the server (B). It can be accessed by any Telnet client.
AUTOMATIC SOFTWARE RESETS TOO
The serial port of the "software PC" is used to send the reset commands to the IPNs. A IPN HUB adapter is required, if the IPN's is connected to an IPN HUB; however, "Daisy Chaining" is the more common method of connecting multiple units.
The AC circuit on the IPN is protected with an easy to change time-delay fuse rated at 10 Amps @ 110VAC to 6 Amps @ 220VAC.
For single unit applications with the addition of the "auto reboot on six ring" feature, see the IPC. It offers the same international connectivity conveniences, but it is not addressable.
INTELLIGENT AC POWER NODE SYSTEM (IPN) Item No SWTIPN Price Contact Bomara Physical 4" W x 3" D x 1" H, 2 lbs. Connectors (2) RJ-11 TelCo/Control, (2) IEC-C13/14 (AC), (1) DB-9 Female RS-232 LEDs (3) Power, Status Switches (1) PushButton Bell None Cable (1) 6' DB-9 Female to DB-9 Male, (1) 5' RJ-11 Phone Cable Adaptor None AC Power 115VAC/60Hz, 10 Amps to 220VAC/50Hz, 6.3 Amps IPN HUB Item No SWTMNC-T1 Price Contact Bomara Physical 4.5" W x 3" D x 1.25" H, 2 lb. Connectors (1) DB-9 RS-232 (2) RJ-45 Concat, (8) RJ-45 LEDs (3) Power, TX, RX Switches None Bell None Cable (1) 8" Concat Cable Adaptor None AC Power Wall Mount 9VAC 1A, 115V/60Hz NOTE: For 220V/50Hz, add (-INT) to the Item No -------------- CONTROLLERS -------------- Required for Remote Control. See the specific Controller for additional specifications TELEPHONE LINE Controllers SP-RRC One Telco Line and One Control Port (to IPN) Item No SWTSPRRC Price Contact Bomara 3P-RRC One Telco Line and Three Control Ports (to IPN) Item No SWT3PRRC Price Contact Bomara NETWORK Controller N-RRC One RJ-45 TCP/IP Network Connection and One Control Port (to IPN) Item No SWTRRC-N Price Contact Bomara -------------- ADAPTERS ----------------- PC SERIAL PORT FILTERED ADAPTER FOR DAISY CHAIN or HEARTBEAT to RJ-11 IPN PORT Item No CA9R11-IPN-F Price Contact Bomara RJ-45 IPN HUB PORT to DB-9 IPN PORT ADAPTER Item No CA9R45-M-28 Price Contact Bomara RJ-11 CONTROLLER PORT to DB-9 IPN HUB ADAPTER Item No CA9R11-HUB-M Price Contact Bomara Physical 2" W x 1.5" D x .75" H, .5 lbs. Connectors DB-9 (Female or Male), (1) RJ-11 or RJ-45 LEDs None Switches None Bell None Cable None Adaptor None AC Power None --------------- CABLES ------------------
IN AC Adapter Cables - FROM POWER MAIN TO THE IPC (Country Connector to IEC 320-14) A - North American 110-115V 6 foot (NEMA 5-15 Receptacle to IEC C13) Item No NA-IPC Price Contact Bomara A - European 6 feet two prong Item No E2-IPC Price Contact Bomara * - Other country cables also available OUT AC Adapter Cables - FROM IPC to the EQUIPMENT B - PC Extension 6 foot (IEC 320-C13 to IEC 320-C14) Item No IPC-PCX Price Contact Bomara C - North American 1 foot (IEC 320-C13 to Equipment, PC, Power Strip, etc.) Item No IPC-NA Price Contact Bomara D - Universal Adapter (Connects to the IPC OUT and accepts any country AC connector) Item No IPC-UV Price Contact Bomara