RELAY BOX (RB)

Provides Dry Contact Closure from CPS Remote ReBoot Controllers

DESCRIPTION

• Normally Open or Normally Closed
• Buzzer or LED Active Alert
• Operates in Parallel With a Phone
• Simple Installation
• No AC power

The RELAY BOX is a "Base Unit" that operates with any of the CPS Remote ReBoot Controllers.

It provides a dry contact closure through the screw terminal lugs. The maximum switched current is 1A. Depending on the connection to the terminal lugs, the relay can be "normally open" or "normally closed".

A slide switch selects the "LED" or "Buzzer" as an activation alert.

The connection to the Controller of choice is through an RJ-11 analog connector. A second RJ-11 is provided so the unit may be connected in parallel to a phone, similar to other CPS "Base Unit" products.

A typical application may be to remotely close the relay and sound an alarm.

SPECIFICATIONS

RELAY BOX (RB)
Item No SWTRLY      Price $32.50

Physical    1.75" W x 3.25" D x .75" H, .25 lbs.
Connectors  (2) RJ-11 TelCo/Control,
            (3) Screw Terminal Lugs
LEDs        (1) Activation Alert
Switches    (1) Slide Activation Alert Select
Bell        (1) Activation Alert
Cable       (1) 5' RJ-11 Phone Cable
Adaptor     None
AC Power    None


-------------- CONTROLLERS --------------

Required for Remote Control.
See the specific Controller for additional specifications

TELEPHONE LINE Controllers
SP-RRC One Telco Line and One Control Port (to Relay Box)
Item No SWTSPRRC            Price $135.00

3P-RRC One Telco Line and Three Control Ports (to Relay Box)
Item No SWT3PRRC            Price $195.00 


NETWORK Controller
N-RRC One RJ-45 TCP/IP Network Connection and One Control Port (to Relay Box)
Item No SWTRRC-N            Price $169.00