Home
Products > Tracker Series (Process Instruments)

 The Tracker Series (Process Instruments):



Jump to:



     Tracker 200 Series: 1/8th Din Panel Meter Range


All Tracker panel meters have the following features unless stated otherwise:

• RS485 isolated serial communications interface, ASCII and MODBUS RTU (slave) protocols. (not Tracker 211)
• Windows PC configuration software available for all models (Tracker 211 requires special cable)
• Front Panel push buttons (optional on Tracker 211)
• Wide ranging 90-265VAC power supply input (low voltage isolated 10-32 VDC option – not Tracker 280)

Universal Input Indicators

Tracker 211

Low Cost, Universal Input
  • Thermocouple, RTD, 20mA, 100mV, 10VDC & Resistance
  • Temperature °C or °F; scaling to engineering units for process inputs
  • 4 Digit red LED (green option)
  • 10V and 24VDC sensor excitation and loop supply outputs
  • 1 alarm relay (2 & 3 relay output options)
  • Hidden configuration buttons (front buttons option)
  • Isolated scalable 4-20mA analog output option
  • Zero, Tare, Max/Min maths functions

Tracker 212

Thermocouple Digital Panel Meter with 5-Digit Display
  • Quick and Easy to Configure
  • Accepts mV, mA, V, Ω Signals Plus Type J, K, N, T, R, S Thermocouples and PT100
  • 24-Point User Linearization for 4-20mA Signals
  • Sensor Excitation for Transducers (10V) or Two Wire Transmitters (24V)
  • Universal Process or Temperature Measurement
  • Selectable Degrees F or C
  • Display Scaling To Any Engineering Units
  • 12-32 VDC/VAC Powered Version Option
  • Universal Mains Power Input (110-250VAC)
  • Scalable Isolated Analog Output Option
  • PC Programming Option
  • Alarm Relay Fitted As Standard (2nd and 3rd Alarm Outputs Option)
  • No Internal Pots, Links, or Plug In Cards
  • Low Cost with a 5 Year Warranty

Tracker 220

High Specification,
Universal Input
  • Thermocouple, RTD, 20mA, 100mV, 10VDC & Resistance
  • Temperature in °C, °F or K; scaling to engineering units for process inputs
  • 4 & 5 Digit red LED (green option)
  • 10V and 24VDC sensor excitation and loop supply outputs
  • Dual relay outputs, function buttons and logic inputs options
  • 24 Point user linearization, Zero, Tare, Max/Min, and SG functions
  • Isolated scalable 0-10V / 4-20mA analog output option
  • Extensive alarm functions including delay, hysteresis and latching
Special Purpose Indicators

Tracker 240

Load Cell and Weighing
Indicator / Controller
  • 6 Wire measurement, 20 bit resolution
  • Fast calibration features with smart input filter
  • 5 Digit red LED (green option)
  • 10VDC load cell excitation for up to 4 x 350 Ohm (24VDC option)
  • Alarm / control outputs, function buttons and logic input options
  • 8 Point user linearization & Max/Min feature
  • Isolated scalable 0-10V / 4-20mA analog output
  • Fill control with In-flight, Trickle Feed, Zero, Tare functions

Tracker 250

Melt Pressure Indicator
  • Strain gauge (mV) and mA inputs
  • Fast calibration using the sensors calibration resistor
  • 5 Digit red LED (green option)
  • 10V and 24VDC sensor excitation and loop supply outputs
  • Extensive alarm functions including delay, hysteresis and latching
  • Isolated scalable 0-10V / 4-20mA analog output
  • User programmable function buttons and logic inputs
  • Alarm output options

Tracker 260

LVDT Indicator
  • Ratiometric LVDT measurement, 20 bit resolution
  • Fast calibration features with null position locator feature
  • 5 Digit red LED (green option)
  • Software selectable excitation voltage and frequency
  • Alarm / control outputs, function buttons and logic input options
  • Isolated scalable 0-10V / 4-20mA analog output
  • Extensive alarm functions including delay, hysteresis and latching

Tracker 280

Timer Counter / Frequency &
Encoder Quadrature Measurement

  • Dual high speed (150KHz) inputs for rate, totalization and encoder
  • De-bounce, low frequency cut off and scaling functions
  • 6 Digit red LED models (green option). 12 digit totalizer function
  • Sensor excitation supply outputs
  • Alarm / control outputs, function buttons and logic input options
  • 8 Point User linearization & Max/Min feature (per channel)
  • Isolated scalable 0-10V / 4-20mA analog output
  • Extensive alarm functions including delay, hysteresis and latching


     Tracker 300 Series: DIN Rail Mounted Products


The Tracker 320/330 models have the following features as standard:

• 90-265VAC power supply input (10-32VDC optional)
• Isolated RS485 Interface with ASCII and MODBUS RTU (slave) protocols
• 22.5mm wide enclosure for high packing density
• Windows PC configuration software available

Tracker 300+

Tracker 300
Tracker 300 shown with optional T340 logic expansion module and DIN Rail Mountable
  • DIN Rail Mountable metered
  • Universal 20 bit analog Input
  • Measures TC, RTD, 100mV, 10V, 20mA and Potentiometer Signals
  • Fully Isolated to Eliminate Ground Loop Noise and Inaccuracy
  • Comprehensive Process Alarm Functions
  • Auto-Tune PID for Heat, Cool and Heat/Cool Applications
  • RS485 Comms (Modbus Compatible) Fitted as Standard
  • High Resolution (15bit) analog Output Option
  • USB Powered Configuration using Free Windows Software
  • Removable Terminals for Easy Installation
  • Self Contained Unit for Single Loop Integrity
  • Thermocouple Condition Monitor
  • Heater Load Failure Detection
  • Optional Logic Expansion Module (T340)

Tracker 321

Data Acquisition and Signal
Conditioner with Universal Input and DIN Rail Mountable
  • DIN Rail Mountable metered
  • Thermocouple, RTD, 20mA, mV, 10VDC & Resistance - 24 bit resolution
  • Temperature °C or °F scaling to engineering units for process inputs
  • Thermocouple ageing alarm feature
  • Comprehensive alarm functions
  • 18 Point user linearization feature
  • 10V and 24VDC sensor excitation and loop supply outputs
  • Zero, Tare, Max/Min and Square Root Extraction
  • Optional isolated 0-10V / 4-20mA scalable analog – 15 bit resolution

Tracker 331

PID Controller / Dual
Trip Amplifier and DIN Rail Mountable

As Tracker 321 but without excitation supply outputs

  • DIN Rail Mountable metered
  • Fully featured PID controller with auto tune
  • Relay + SSR drive outputs (2 relays option, replaces SSR drive)
  • Direct, reverse or heat/cool control actions
  • Communication loss "self defense" functions
  • Partial load failure alarm feature
  • Optional isolated 0-10V / 4-20mA analog output for use as a PID control output or for signal re-transmission / conditioning – 15 bit

Tracker 332

PID Controller / Signal
Conditioner / Trip Amplifier and DIN Rail Mountable

As Tracker 321 – Requires a 340 module or analog output option for PID

  • DIN Rail Mountable metered
  • Fully featured PID controller with auto tune
  • Direct, reverse or heat/cool control actions
  • Communication loss "self defense" functions
  • Partial load failure alarm feature
  • 10V and 24VDC sensor excitation and loop supply outputs
  • Optional isolated 0-10V / 4-20mA analog output for use as a PID control output or for signal re-transmission – 15 bit

Tracker 340

Logic Expansion Module and DIN Rail Mountable
  • DIN Rail Mountable metered
  • Provides any 320/330 with 4 additional logic outputs (up to 6 with Tracker 331)
  • Powered and controlled from a 320/330 unit
  • Alarm relay or TTL output options
  • High, low and deviation alarm functions
  • On and off delay timers, hysteresis and alarm blocking features
  • Front panel alarm LED indicators
  • Outputs can be used for PID control (Trackers 331 & 332)
  • 2 logic inputs for remote control functions or switch detection
  • Many user programmable functions including tare, zero etc

Tracker 300 - CONF

Configuration Adapter and DIN Rail Mountable
  • DIN Rail Mountable metered
  • Allows quick connection for configuration and diagnostic purposes
  • Powered from a PC’s RS232 port
  • 1 meter long cable, plugs into a socket on the front panel
  • Includes configuration and data acquisition software CD (also available separately)

    Note: Configuration also possible via RS485 Interface

300 - HMI Series

HMI Operator Interfaces and DIN Rail Mountable
  • DIN Rail Mountable metered
  • Available in 144mm (5.7”), 195mm (7.7”) and 264 (10.4”) screen sizes
  • 133MHz 32 Bit RISC processor
  • RS485, RS323, Printer and Ethernet connectivity options
  • Durable resistive touch screen, color and black & white options
  • Includes powerful PC Configuration
  • Master/Slave communication protocols




     SCADA Software


Data Track supports the DCS/SCADA software package for PC’s running the WINDOWS operating system. From simple “plug and play” data acquisition to bespoke and customizable systems, Data Track can provide the most cost effective, yet flexible solution.

Features include:

  • Full development tools provided
  • Modbus RTU protocol compatible with Tracker 200 and 300 range
  • Multiple drivers available allowing connection to other devices
  • LAN or PSTN networking features
  • Recipe and batch facilities
  • Real time and historic trending with zoom functions
  • Multiple sequence programming with easy to use language
  • Microsoft Access, CSV, DDE and OPC data formats
  • Data transfer between multiple systems using Netbios and TCP/IP
  • Millisecond resolution timing functions
  • Multiple password protection levels
  • SMS, messaging, SMS control, E-mail and faxed reports



Data Track Home Bomara Homepage Request Information

Bomara Associates Phone: 800.5BOMARA (800.526.6272) Phone: 978.452.2299 Fax: 978.452.1169 3 Courthouse Lane, Chelmsford, MA 01824 USA
Phone: 800.5BOMARA (800.526.6272)

Phone: 978.452.2299

 

Fax: 978.452.1169

Email: bobr@bomara.com

  Web: www.bomara.com

3 Courthouse Lane, Chelmsford, MA 01824 USA
Serving the marketplace for over 40 years

© 2014 by Bomara. All rights reserved

 



First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me