ECD ADAPTERS

UDC-RA (Universal Data Converter)

The UDC-RA Rate Adapter allows low speed async or sync RS-232 data terminal equipment(DTE) to transmit over a higher speed 16k, 64k or 128k sync data communication equipment(DCE) link. The UDC-RA will support bi-directional or simplex data transmissions.

Sync2IP

The Sync2IP is a device that transports serial communications over a TCP/IP network. It converts a full duplex Sync or Async serial data stream to a TCP/IP packet stream.

The RA-64/128K Rate Adapter allows low speed async RS-232 DTE equipment to transmit over a high speed 64K or 128k sync communications link. The RA-64/128k will support bi-directional or simplex data transmissions.

RA-64k/128k_V35-AC

The RA-64/128K Rate Adapter allows low speed async RS-232 DTE equipment to transmit over a high speed 64k or 128k sync communications link. The RA-64/128k devices are used in pairs, one at each end of the communications link or in multiples as when used in a multi-point or broadcast communications link. The RA-64/128k will support bi-directional or simplex data transmissions.

The SV11-AV24 allows simplex 9600bps synchronous 8-bit data to be transmitted to asynchronous 19.2kbps data terminal equipment (DTE). The synchronous data interfaces supported are RS-422/449, V.35 and RS-530. The asynchronous data interface is RS-232.

The ASC-232 Async to Sync Converter is designed to allow async terminal equipment to transmit over higher speed sync modems. The device is autobaud at data rates up to 38.4Kbps and is line powered.

This converter allows Asynchronous RS-232 DTE equipment to communicate over Synchronous RS-530 or RS-422/449 DCE equipment. The product was developed especially for government and secure encrypted Modems utilized by a Gretacoder that has an existing RS-422/V.11 electrical interface.