 |
CE-232
Cable Extender
RS-232 Data Signal Extender |
Features/Benefits
- Interface
- RS-232 and Inverted RS-423
- Data Rates
- Sync/Async to 64Kbps
- DCE or DTE
Selectable Ports
- Utilizes
Female DB-25 and Pluggable 8-Pin Terminal Blocks
- Passes All
Appropriate Control Signals
- Bi-Directional
Data Transmission
- Transparent
to Data
- Compact
and Easy To Install
- 110/220VAC
Switch Selectable
Description
The
CE-232 is a point-to-point device that allows the extension
of eight control signals far greater in distance than that
of conventional RS-232. The CE-232 is terminated to a DCE
type device (on the RS-232 port) at one end of the communication
link. A cable, fully shielded, is then terminated to the CE-232
and attached to another CE-232 at the corresponding end. The
CE-232 transmits an inverted RS-423 signal. This allows all
control signals to be transmitted, bi-directionally for distances
that may equal up to 5000 ft.
Located
on the front panel of the CE-232 are eight (8) LED indicators.
The PWR indicator, TXD, RXD, RTS, CTS, DCD, TXD and RXC which
represent the RS-232 control signals. The control signal indicators
act as a break out box in that installation and trouble shooting
are a straight forward process. When properly terminated and
with the presence of DATA, all control signals are active
between the two connected CE-232s and the LEDs illuminated.
The
CE-232 is housed in a sturdy metal enclosure and will provide
in excess of 100,000 hours of reliable service.
The
CE-232 has a three year warranty and a 24 hour turnaround
on warranty repairs.
|
|
Specifications
| Application |
RS-232
signal extension between DCE and DTE devices |
| Capacity |
One
RS-232 DTE and One RS-232
DCE Sync/Async device |
| Interface |
RS-232
and Inverted RS-423 |
| Data
Rates |
Up
to 64Kbps |
| Data
Format |
Data
transparent at all data rates |
| Switches |
None
(All connections are external) |
| RS-232
Physical Interface |
Female
DB-25 Connectors |
| RS-423
Physical Interface |
Pluggable
8-Pin Terminal Blocks |
| Power
Source |
100-120
to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt
select switch, IEC Power Inlet, (2) 5mm Fuses |
| Environmental |
Operating
Temperature . .32º to 122º F (0º to 50º
C)
Relative Humidity
. . . .. . .5 to 95% Non-Condensing
Altitude . . .
. . . . . . . . ... . .0 to 10,000 feet |
| Dimensions |
Height
....... 1.75 inches (4.44 cm)
Width ........
7.90 inches (20.07 cm)
Length .......
9.00 inches (22.86 cm) |
| Weight |
2 pounds
(0.914Kg) |
| Warranty |
Three
Years, Return to Factory |
| Ordering
Information: |
Model:
CE-232
Description: RS-232 Signal Extender |
| Included
with each unit: |
1)
Operations Manual
2) One (1) Screw
Plug Block |
|
|
ECD Home
Bomara Homepage