ECD Home » Ethernet Stress Testing » EDS-10G

 ECD EDS-10G: Ethernet Delay Simulator - 10/100/1000 & 10GbE



EDS-10G-press-photo




Description:

The EDS-10G is an Ethernet Delay Simulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss, congestion and other important link impairments over 10/100/1000, 10GbE and 40Gbe Ethernet.

The EDS-10G utilizes the latest hardware and software design allowing Line Rate Performance. The unit is a must have test tool for product development / demonstrations, network validation, VoIP benchmark testing, video / IPTV simulation and transaction performance. 



  • Ordering Info
  • Overview
  • Tech Specs
  • Typical Application



Ordering Information for the EDS-10G:


Model Main Unit Part Number Description
EDS-10G 210000 EDS-10G Ethernet Delay Simulator
4-Port 1G Copper 226000 4-Port 10/100/1000 Copper Interface
2-Port 1G Fiber
226001 2-Port 10/100/1000 Fiber Interface
2-Port 10G Copper 214002 2-Port 10G Copper Interface
2-Port 10G Fiber
(SFP Included)
214003 2-Port 10G Fiber Interface


Included with each unit: Operations Manual, Power Cord, Rackmount Kit Ears




Overview for the EDS-10G:


The EDS-10G is an Ethernet Delay Simulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss, congestion and other important link impairments over 10/100/1000, 10GbE and 40Gbe Ethernet. 

The EDS-10G utilizes the latest hardware and software design allowing Line Rate Performance. The unit is a must have test tool for product development / demonstrations, network validation, VoIP benchmark testing, video / IPTV simulation and transaction performance. 

The hardware based architecture is coupled with custom software presenting an easy to use interface. The unit operates from a command line interface or web browser. The user has no cumbersome software or confusing licenses to deal with for secure operation. 

The EDS-10G can act as a bridge or a router in the users network. The user configures the unit via a standard web browser. All commands and settings are displayed prominently. Simply set the band width, delay and any traffic congestion or loss if required. The unit also supports a filtering method of IP Packets and scripting support for automated testing. The user is presented with the results in real time and in a graph. 

By using the EDS-10G in place of or in series with a real data link (WAN) a wide variety of error conditions can be introduced under controlled and testable conditions. The unit is an excellent choice for validating and evaluating new products and technologies. The software has been optimized for extreme accuracy and repeatable results. 

The EDS-10G is housed in a sturdy 3U high metal enclosure which can be rack mounted. It is powered by an integrated 90-240V 50/60Hz power supply. The EDS-10G has a three year warranty and a 24 hour turnaround on warranty repairs.

 

Features for the EDS-10G:

  • Hardware Architecture Providing High Throughput Performance and Repeatable Results / Accuracy

  • Interface - 10/100/1000 and 10GbE Copper or Fiber Interfaces Available

  • Supports UDP, TCP, MPLS, VLAN, ESP, LPD & Encrypted Packets

  • Supports multiple links and filtering of packets

  • Validate and Optimize your Network before Deployment to avoid Costly Application issues

  • Easy to use - Command Line Interface with Scripting Support or GUI Interface

  • Bandwidth - 300bps - 10GbE in 1bps increments

  • Delay - 0 ms to 8 sec. in 1ms increments, settings for Constant, Uniform and Normal

  • Standard or Fine Grain Packet Control:
    - Allows Packet Loss, Bit-errors, Bandwidth changes, delay change patterns, packet re-ordering and trigger patterns when a specific number of packets have been sent or specific points in time

  • Other Features - Real time traffic graph and Network Statistics, output reports

  • Approvals - UL, CSA, CE, FCC and RoHS

  • 3U Sturdy Rack Mount Enclosure, 90240VA



Technical Specifications for the EDS-10G:

Application Interconnection of 10GbE or 10/100/1000 devices simulating bandwidth, latency, packet loss and congestion on two independent LAN channels
Protocols Supported UDP, TCP, MPLS, VLAN, ESP, LPD, Encrypted Packets
Password Protection Implemented via the user LAN Management Port and factory reset via the RS-232 Serial Port
Configuration Ports Two Independent 10/100/1000 Ethernet Ports
Data Interface on Delay Ports 10/100/1000 or 10GbE, Copper or Fiber with SFP
Link Rates 300bps - 10GbE in 1bps increments, bi-directional or split speed,
bps, Kbps, Mbps or Gbps
Link Throughput Line Rate or Near Line Rate(90-100%) for any Packet Size with advanced user space drivers
Emulated Latency 0 ms to 8 sec. in 1ms increments, settings for constant, uniform or normal
Enhanced Setting Standard or Fine Grain Packet Control - Allows Packet Loss, Bit errors, Bandwidth changes, delay change patterns, packet reordering and trigger patterns when a specific number of packets have been sent or specific points in time
Emulation Statistics Each link is capable of independent output statistics settings via the software scheduler
Packet Loss 0 to 100% in increments of 0.001%
Re-Ordering Settings for Probability & Delay Min/Max
Background Traffic 0 to 100% in increments of 0.001%, settings for LAN Utilization and Bust Size
Surge Protection Main power supply
Power Source AC Mains: 100-240VAC @ 10%, 50/60Hz, 0.16/0.08A, Auto Range
Environmental Operating Temperature....32º to 104º F (0º to 40º C)
Relative Humidity.............5 to 85% Non-Condensing
Altitude............................0 to 10,000 feet
Dimensions Height ....... 3.50 inches (88.90 mm)
Width ........ 17.20 inches (436.88 mm)
Length ....... 14.50 inches (368.30 mm)
Warranty Three Years hardware, includes software support and software feature upgrades/improvements
Software Upgrades Administered via the LAN user management Port
Regulatory Approvals UL, CSA, CE, FCC and RoHS
Web Browser Compatibility Explorer, FireFox, Opera, Google / Chrome, Safari
Other East Coast Datacom Products RDS-PLUS, Serial Network Latency Simulator
(Supports all serial interfaces, T1, E1, DS3 ect..)
STG-10G, 1G to 10GbE IP Traffic Generator



Typical Application for the EDS-10G:


eds-10g-application


 




Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized