ECD » Test
Equipment » RDS
 |
RDS
Router Delay Simulator
- Network Latency Simulator
- Wan Simulator
- Satellite Delay Simulator
|
Features/Benefits
- Interface
- ITU V.35 (MR-34 Female Connectors, V.11 electrical
- Optional: RS-530, RS-422/449, RS-232 or X.21
- Network
Simulation delays of 5mS up to 1250mS in 5mS increments
- Data Rates
- Synchronous to 2.048Mbps
- Option for T2 (6.312Mbps)
- Controls
for RTS/CTS delay, DSR, DTR on a per port basis
- Status LED's
for each port allows ease of connection and trouble shooting
- Timing -
Internal or accepts external timing from DTE for test purposes
- 110/220VAC
switch selectable
- Sturdy Metal
Enclosure
Description  The Router Delay Simulator
(RDS) allows Router-to-Router connections at data rates up to 2.048Mbps
while simulating network delays. The user selectable delays are
for both data and control signals and range from 5 milliseconds(mS)
to approximately 1250 mS, in 5 mS increments. The RDS allows users
to test and pre-configure Routers (with software applications)and
other critical DTE equipment for reliable network operation while
simulating network delay times.
The RDS has individual data interfaces that allow V.35, RS-530,
RS-422/449, RS-232 and X.21 connections. The data interfaces may
also be mix and matched such as V.35-to-RS-530 connection.
Installation is fast and simple by setting the internal switches
for Delay Simulation, Clocking, Carrier Operation and RTS to CTS
delay. All clocking and signal crossover are provided within the
RDS.
The RDS has status LED's for each attached DTE device that allows
the user to visually confirm the presence of control signals.
The RDS utilizes state of the art digital CMOS technology to provide
a feature filled product at a very affordable price. Our Field Programmable
Gate Array (FPGA) design has allowed us to offer this product with
a wide selection of user Delay Settings and Baud Rates.
The RDS is housed in a sturdy metal enclosure and operates on 110/220VAC.
The RDS has a three year warranty and a 24 hour turnaround on warranty
repairs.
|
Specifications
|
| Application |
Interconnection
of two Routers or DTE (Terminal) devices located within proximity
of each other while simulating network delays times |
| Simulation
Delay Times |
5
milliseconds(mS) to approximately 1250 mS, in 5 mS increments
Note: Baud Rate effects total delay times
|
| Capacity |
Two
(2) Routers or DTE's |
| Data
Rates |
Up
to 2.048Mbps
Option for T2 (6.312Mbit)
|
| Data
Channel Interfaces |
Available
in V.35, RS-530, RS-422/449, RS-232 or X.21 |
| Surge
Protection |
Main
power supply |
| Power
Source |
100-120
to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220
volt select switch, IEC Power Inlet, (2) 5mm Fuses |
| Environmental |
Operating
Temperature....32º to 122º F (0º to 50º
C)
Relative Humidity.............5 to 95% Non-Condensing
Altitude............................0 to 10,000 feet
|
| Dimensions |
Height
....... 1.75 inches (4.44 cm)
Width ........ 7.90 inches (20.07 cm)
Length ....... 9.00 inches (22.86 cm)
|
| Weight |
2
pounds (0.914Kg) |
| Warranty |
Three
Years, Return to Factory |
| Ordering
Information |
Model:
RDS
Part: 129000
Description: Router Delay Simulator
Interfaces Available:
V.35, PT# 129010
RS-530, PT# 129011
RS-422/449, PT# 129012
X.21, PT# 129013
RS-232, PT# 129014
|
| Included
with each unit: |
1)
Operations Manual
2) U.S.A. Grounded Power Cord, Part # 713015
|
| Optional
Accessories |
1)
Spare Data Center Fuses
A) 160ma Fuse, Qty (2) Part # 714000
B) 80ma Fuse, Qty (2) Part # 714001
2) Optional Power
Cords
A) United Kingdom, Part # 713016
B) Continental Europe, Part # 713017
C) Other: Specify Country on Purchase Order
|
|
|
|
|
|
ECD Home
Bomara Homepage