 |
RDS-STB
Selectable
Transmit Buffer NEW
|
Features/Benefits
- Interface
- RS-422/449
Optional: RS-530, V.35, RS-232 or X.21
- Selectable
delays of 5mS up to 1250mS in 5mS increments
- Data
Rates - Synchronous to 10Mbps
- Status
LED's for each port allows ease of connection and trouble
shooting
- Timing
- accepts external timing from attached DCE
- 110/220VAC
switch selectable
- Sturdy
Metal Enclosure for standalone or rackmount installations
Description
The Selectable Transmit
Buffer(RDS-STB) allows DCE to DTE connections at data rates up
to 10Mbps. The user selectable buffer delays are for both data
and a control signal in each direction and range from 5 milliseconds(mS)
to approximately 1250 mS, in 5 mS increments. The STB allows users
to transmit data to critical DCE/DTE equipment such as satellite
receivers, digital service unit(DSU) or other network access device
for reliable network operation while fine tuning network delay
times.
An example utilizing the STB is to allow the user to even the
network delays between a terrestrial and satellite network for
financial transactions.
The STB has individual data interfaces that allow V.35, RS-530,
RS-422/449, RS-232 and X.21 connections for both DCE and DTE interfaces.
The data interfaces may also be mix and matched such as V.35-to-RS-530
connections.
The STB has status LED's for each attached device which allows
the user to visually confirm the presence of control signals.
Installation is fast and simple by setting the switches for delay
time, clocking and Clear To Send(CTS) control.
The RDS-STB uses state of the art digital CMOS technology to provide
a feature filled product at an affordable price. The units design
offers a field programable gate array(FPGA) for fast customer
specified changes.
The unit is housed in a sturdy metal enclosure and operates on
110/220VAC.
The unit has a three year warranty and a 24 hour turnaround on
warranty repairs. |
|
Specifications
| Application |
Interconnection
of a DCE and DTE device located within proximity of each other
while simulating network delays times |
| Delay
Times |
5
milliseconds(mS) to approximately 1250 mS, in 5 mS increments
Note: Baud Rate effects total delay times
|
| Capacity |
One(1)
DCE device
One(1) DTE device
|
| Data
Rates |
Up
to 10Mbps |
| Data
Channel Interfaces |
Available
in V.35, RS-530, RS-422/449, RS-232 or X.21 |
| Surge
Protection |
Main
power supply |
| Power
Source |
100-120
to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220
volt select switch, IEC Power Inlet, (2) 5mm Fuses |
| Environmental |
Operating
Temperature....32º to 122º F (0º to 50º
C)
Relative Humidity.............5 to 95% Non-Condensing
Altitude............................0 to 10,000 feet
|
| Dimensions |
Height
....... 1.75 inches (4.44 cm)
Width ........ 7.90 inches (20.07 cm)
Length ....... 9.00 inches (22.86 cm)
|
| Weight |
2
pounds (0.914Kg) |
| Warranty |
Three
Years, Return To Factory |
| Ordering
Information |
Model:
RDS-STB
Description: Selectable Transmit Buffer
Interfaces Available:
V.35, PT# 129010
RS-530, PT# 129011
RS-422/449, PT# 129012
X.21, PT# 129013
RS-232, PT# 129014
|
| Included
with each unit: |
1)
Operations Manual
2) U.S.A. Grounded Power Cord, Part # 713015
|
| Optional
Accessories |
1)
Spare Data Center Fuses
A) 160ma Fuse, Qty (2) Part # 714000
B) 80ma Fuse, Qty (2) Part # 714001
2) Optional Power
Cords
A) United Kingdom, Part # 713016
B) Continental Europe, Part # 713017
C) Other: Specify Country on Purchase Order
|
|
|
|
|
ECD Home
Bomara Homepage