 |
SME-530
RS-530 Sync Modem Eliminator
ITU - V.11 |
Features/Benefits
- Interface
- ITU V.11 RS-530 DB-25 Female Connectors
- Data
Rates - Synchronous to 2.048Mbps - Option for T2 (6.312Mbps)
- FPGA
design allows very low jitter at high end speeds
- Options
for RTS/CTS delay, DSR, DTR on a per port basis
- Timing
- Internal or accepts external timing from DTE for test
purposes
- Status
LED's for each port allows ease of connection and trouble
shooting
- 110/220VAC
switch selectable
- Sturdy
Metal Enclosure
Description
The SME-530 allows two
RS-530 DTE devices to communicate within proximity of each other.
The SME-530 transmits data bi-directionally at data rates up to
2.048Mbps between DTE devices. All clocking and signal crossover
are provided within the SME-530. The unit is equipped with two DB-25
female connectors.
The SME-530 is an excellent
choice for interconnecting your LAN or mainframe equipment. Substantial
cost savings are derived by eliminating the need for 56/64Kbps CSU's
and T1 CSU's.
Installation is fast
and simple by setting the internal switches for Clocking, Carrier
Operation and RTS to CTS delay. The SME-530 has status LED's for
each attached DTE device which allows the user to visually confirm
the presence of control signals.
The SME-530 utilizes
state of the art digital CMOS technology to provide a feature filled
product at a very affordable price. Our Field Programmable Gate
Array (FPGA) design has allowed us to offer this product with a
wide selection of user Baud Rates. This design approach has also
reduced the amount of clock jitter for high speed 2.048Mbps transmissions.
The SME-530 is housed
in a sturdy metal enclosure and operates on 110/220VAC. Typical
MTBF figures are in excess of 100,000 hours of operation.
The SME-530 has a three
year warranty and a 24 hour turnaround on warranty repairs.
|
|
Specifications
| Application |
Interconnection
of two RS-530 DTE (Terminal) devices located within proximity
of each other |
| Capacity |
Two
(2) RS-530 DTE's |
| Interface |
RS-530
using V.11 electrical specification |
| Data
Rates |
Up
to 2.048Mbps; Option for T2 (6.312Mbit) |
| Channel
Interface |
Two
Female DB-25-P Connectors |
| Surge
Protection |
Main
power supply |
| Power
Source |
100-120
to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt
select switch, IEC Power Inlet, (2) 5mm Fuses |
| Environmental |
Operating
Temperature . .32º to 122º F (0º to 50º
C)
Relative Humidity..
. . . . . .5 to 95% Non-Condensing
Altitude. . . .
. . . . . . . . . ... .0 to 10,000 feet |
| Dimensions |
Height
....... 1.75 inches (4.44 cm)
Width ........
7.90 inches (20.07 cm)
Length .......
9.00 inches (22.86 cm) |
| Weight |
2 pounds
(0.914Kg) |
| Warranty |
Three
Years, Return to Factory |
| Ordering
Information: |
Model:
SME-530
Description: Synchronous RS-530 Modem Eliminator |
| Included
with each unit: |
1)
Operations Manual
2) U.S.A. Grounded Power Cord, Part # 713015 |
| Optional
accessories |
1) Spare
Data Center Fuses
.. A) 160ma Fuse, Qty (2) Part
# 714000
.. B) 80ma Fuse, Qty (2) Part
# 714001
2) Optional Power
Cords
.. A) United Kingdom, Part #
713016
.. B) Continental Europe, Part
# 713017
.. C) Other: Specify Country
on Purchase Order |
|
|