 |
Router Delay Simulator PLUS (RDS-PLUS)
The RDS-PLUS is a modular, network link error and delay simulator that provides a realistic simulation of physical network behavior with respect to time delays and bit errors. The RDS-PLUS supports a wide range of interface types and speeds, ranging from 1200bps to over 50Mbps. Ideal Network Latency Simulator. |
 |
Router
Delay Simulator (RDS)
For testing network transmission delays. The Router Delay
Simulator (RDS) allows Router-to-Router connections at data rates up
to 2.048Mbps while simulating network delays. The user selectable delays
are for both data and control signals and range from 5 milliseconds(mS)
to approximately 1250 mS, in 5 mS increments. The RDS allows users to
test and pre-configure Routers (with software applications)and other
critical DTE equipment for reliable network operation while simulating
network delay times.
|
 |
Router Delay Simulator,
External Clock Option (RDS-ECO)
For testing network transmission delays utilizing an external
clock source.
The Router Delay Simulator (RDS-ECO) allows Router-to-Router connections
at data rates up to 5Mbps while simulating network delays. The user selectable
delays are for both data and control signals and range from 5 milliseconds(mS)
to approximately 1250 mS, in 5 mS increments. The RDS-ECO allows users
to test and pre-configure Routers (with software applications)and other
critical DTE equipment for reliable network operation while simulating
network delay times.
|
 |
Router Delay Simulator, Long
Data Delays (RDS-LDD)
For testing network transmission delays utilizing an external
clock source and Long Data Delays. Control Signals are not delayed.
The Router Delay Simulator with long data delays(RDS-LDD) allows DCE
to DTE connections at data rates up to 5Mbps while simulating network
delays. The user selectable delays are for bi-directional data and range
from 10 milliseconds(mS) to approximately 2560 mS, in 10 mS increments.
The RDS-LDD allows users to test and pre-configure critical DTE equipment
such as Routers (with software applications) along with an attached
modem, digital service unit(DSU) or other network access device for
reliable network operation while simulating additional network delay
times.
|
 |
DTS,
Data Test Set
The Data Test Set (DTS) provides a means for a technician at a remote
site to implement a full external loopback at the terminal port of a
DSU or modem and to obtain visual indication of the circuit operation.
|
 |
V35-BBOX
This product is a breakout box for both V.35 and X.21 interfaces. The
unit is 115/230VAC selectable. This is a high quality test box that
was developed by customer demand.
|
ECD Home
Bomara Homepage