ECD » Interface Converters » UDC-RDS_LS

 ECD UDC-RDS Low Speed Rackmount: Test, Stage, and Simulate Network Delay Times

udc-rds

The UDC-RDS_LS and UDC-RDS-ECO allows users to test/stage critical low data rate testing of DCE or DTE equipment while simulating network delay times. The unit provides a realistic simulation of physical network behavior with respect to time delays, clock rates and interface control signal passage. The unit supports user data rates of 300bps up to 1.024Mbps while providing delays from zero to a maximum of 1 second on each way per physical data link. 

By using the UDC-RDS in place of or in series with a real data link (WAN) a wide variety of error conditions can be introduced under controlled and testable conditions.

The unit has two data port interfaces that support RS-232, RS-422/449, RS-530, V.35 and X.21. The data interfaces can be mix and matched where applicable, such as a V.35-to-RS-530 connection. 

The UDC-RDS also allows the user to pass or force control signals. The control signals are also delayed along with the user data.

The unit is configured via accessible front panel dip switches and is available in a stand-alone or rack mount chassis. The user has no software to load as all configurations are within the UDC-RDS. Installation is fast and simple by setting the internal switches for Delay Simulation, Clocking, Carrier Operation and RTS to CTS delay. All clocking and signal crossover are provided within the UDC-RDS. 

The UDC-RDS has status LED’s for each attached DTE or DCE device which allows the user to visually confirm the presence of control signals. 

The UDC-RDS is housed in a sturdy metal enclosure and operates on 110/220VAC. 

UDC-RDS
Router or DTE/DCE
Serial
WAN Delay Simulator
Control via Dip Switches
Adjustable Bandwidth 300bps to 1.024Mbps 2 ports

Specifications

Application Interconnection of two Routers or DTE (Terminal) devices located within proximity of each other while simulating network delays times
Simulation Delay Times 0, 5 milliseconds(mS) to approximately 1 second in 5mS increments each direction Note: Baud Rate affects delay times(see manual chart)
Capacity Two (2) Routers or DTE’s /DCE’s
Data Rates 300bps to 1.024Mbps
Data Channel Interfaces Available in V.35, RS-530, RS-422/449, RS-232, X.21 or TTL
Surge Protection Main power supply
Regulatory Approvals UL 60950-1, 2nd Ed 2007; CAN/CSA 22.2 No. 60950-1-07; EN 60950-1:2006; EN 55022:2006; FCC Pt 15/ICES-003 Class A
Power Source 100-120 to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt select switch, IEC Power Inlet, (2) 5mm Fuses
Environmental Operating Temperature....32º to 122º F (0º to 50º C)
Relative Humidity.............5 to 95% Non-Condensing
Altitude............................0 to 10,000 feet
Dimensions Height: 1.75 inches (4.44 cm), 
Width: 9 inches (22.86 cm), 
Length: 9 inches (22.86 cm)
Weight 2 pounds (0.914 Kg)
Warranty Three Years, Return To Factory
Ordering Information Internal Clock Version
PT# 187000 
Model: UDC-RDS_LS 
Description: UDC-RDS Internal Clock Delay Simulator (90-240 AC Mains)

External Clock Version 
PT# 188000 
Model: UDC-RDS-ECO 
Description: UDC-RDS-ECO External Clock Delay Simulator

Rack mount Version 
PT# 211000
Model: UDC-RDS_LS_RM 
Description: UDC Delay Simulator LS, 1U Rack mount, Int Clock 300bps to 1.024Mbps, Variable Delays (90-240 AC Mains)


INCLUDED WITH EACH UNIT: 
1) Operations Manual 
2) U.S.A. Grounded Power Cord, Part # 713015 
3) Optional Power Cords
A) United Kingdom, Part # 713016 
B) Continental Europe, Part # 713017 
C) Other: Specify Country on Purchase Order

Interfaces Available:
Part No: 129014 RS-232 DCE I/M 
Part No: 129032 RS-232 DTE I/M 
Part No: 129010 V.35 DCE I/M 
Part No: 129028 V.35 DTE I/M 
Part No: 129011 RS-530 DCE I/M 
Part No: 129029 RS-530 DTE I/M 
Part No: 129012 RS-422 DCE I/M 
Part No: 129030 RS-422 DTE I/M 
Part No: 129013 X.21 DCE I/M 
Part No: 129031 X.21 DTE I/M 
Part No: 129057 TTL I/M



Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized