ECD » Modem Eliminators » UDC-ME V.35

 UDC-ME V.35: Modem Eliminator

The UDC-ME V.35 modem eliminator allows two DTE devices (such as routers) to communicate within proximity of each other. The UDC-ME transmits data bidirectionally at clock rates of 1.2k up to 3.072Mbps between DTE devices. All clocking and signal crossover are provided within the UDC-ME. The unit is equipped with two interface slots that allow a host of serial interface cards to be utilized. The serial interface cards available are RS-232, RS-422/449, RS-530, X.21, V.35 and HSSI. The Serial Interface cards are interchangeable and may be mixed such as RS-232 to V.35 thus eliminating the need for an interface converter or changing expensive serial cards on a DTE device such as a router.

The UDC-ME V.35 modem eliminator is also an excellent choice for testing router-to-router connections via the serial ports. The unit is an excellent choice for interconnecting your LAN or legacy mainframe equipment.

Installation is fast and simple by setting the internal switches for Clocking, Carrier Operation and RTS to CTS delay. The UDC-ME has status LED’s for each attached DTE device which allows the user to visually confirm the presence of clock and control signals.

The UDC-ME utilizes state of the art digital CMOS technology to provide a feature filled product at a very affordable price. Our Field Programmable Gate Array (FPGA) design has allowed us to offer this product with a wide selection of clock rates. This design approach has also reduced the amount of clock jitter for high speed transmissions.

The UDC-ME is housed in a sturdy metal enclosure and operates on 110/220VAC or optional -48V DC power. Typical MTBF figures are in excess of 150,000 hours of operation.

The UDC-ME has a three year warranty and a 24 hour turnaround on warranty repairs.

UDC-ME
UDC-ME Tech

 

FEATURES/BENEFITS

  • Interface - ITU V.35, V.11 compliant with MR-34 Female Connectors
  • Data Rates - 1.2k to 3.072M - 32 Selectable Rates
  • Serial Data Interface cards are Interchangeable and may be mixed such as V.35 to RS-530
  • Controls for RTS/CTS delay, DSR, DTR on a per port basis
  • Timing - Internal
  • Status LED’s for each Serial Port and Signal
  • 110/220VAC switch selectable or DC Power for -48VDC
  • UL, CSA and CE Approved, RoHS
  • Sturdy Metal Aluminum Enclosure
UDC-ME Chart


Specifications

Application Interconnection of two DTE’s (such as Routers) located within proximity of each other
Capacity
Two (2) DTE’s
Serial Data Interface V.35 or RS-232, RS-422/449, RS-530, X.21 and HSSI
Data Format Data Transparent at all Data Rates
Inversion Option Data Inversion or Clock Inversion
Selectable Clock Rates 1.2k, 2.4k, 4.8k, 7.2k, 9.6k, 14.4k, 16k, 19.2k, 28.8k, 32k, 38.4k, 48k, 56k, 57.6k, 64k, 72k, 96k, 128k, 192k, 256k, 384k, 512k, 768k, 1.024M, 1.280M, 1.472M, 1.536M, 1.544M, 1.920M, 1.984M, 2.048M, 3.072M
Indicators POWER TXD, RXD, TXC, RXC, RTS, CTS, DTR, DCD
Surge Protection Main power supply
Power Source AC Mains: 100-120 to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt select switch, IEC
Power Inlet, (2) 5mm Fuses
DC Mains: DC Voltage, Input Range of -36 to -72vdc
Current Draw at 48vdc: 75ma @ 3.6watts
Environmental Operating Temperature....32º to 122º F (0º to 50º C)
Relative Humidity.............5 to 95%
Non-Condensing
Altitude............................0 to 10,000 feet
Dimensions Height ....... 1.75 inches (4.44 cm)
Width ........ 9.00 inches (20.86 cm)
Length ...... 9.00 inches (20.86 cm)
Weight 2 pounds (0.914Kg)
Warranty Three Years, Return To Factory
Ordering Information

Main Unit Part Number: 189000 Model: UDC-ME
Description: UDC Modem Eliminator

Serial Interface Cards, Two Cards Required Per UDC-ME, pick any two cards, may be the same card twice or any combination.

Part Number Serial Card Description
129014 RS-232 DCE I/M, DB-25 Female
129010 V.35 DCE I/M, MR-34 Female
129011 RS-530 DCE I/M, DB-25 Female
129012 RS-422/449 DCE I/M, DB-37 Female
129013 X.21 DCE I/M, DB-15 Female
151028 HSSI DCE I/M, 50 Pin Female

 

Included with each unit: 1) Operations Manual
2) U.S.A. Grounded Power Cord, Part # 713015
3) Optional Power Cords
A) United Kingdom, Part # 713016
B) Continental Europe, Part # 713017
C) Other: Specify Country on Purchase Order
Optional Accessories 1) Spare Data Center Fuses
A) 160ma Fuse, Qty (2) Part # 714000
B) 80ma Fuse, Qty (2) Part # 714001

 




Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized