 |
VDSL-MUX
- Allows use of unconditioned 2-wire lines
- End to end campus interface
- Ideal for video conferencing over existing wire lines
|
FEATURES/BENEFITS
- * LAN Internetworking, Video Conferencing, Channel Extensions,
Remote Data Center Access, Distributed PBX networking
* Line Interface - 2-Wire unconditioned copper utilizing VDSL Technology
* 10 Base-T LAN Port
* Serial NX64 Port, Selectable Interfaces
* T1(DSX-1) or E1 Port for Multiple Voice Channels
* Data Rates - Synchronous to 52Mbps
* Crosstalk Immunity
-
DESCRIPTION
 The
VDSL-MUX provides unprecedented speed for network expansion in
a campus environment. With the VDSL-MUX installed at each end
of an unconditioned 2-wire line, you have instant access to multiple
digital services such as LAN internetworking, PBX extensions
and video conferencing simultaneously. The unit may also be utilized
as a long haul Limited Distance Modem for point to point networking.
The VDSL-MUX utilizes a VDSL chip set for the 2-wire line interface providing
very reliable fully digital data transmissions.
Designed to bridge the gap between LANs and WANs the VDSL-MUX features full duplex
rates up to 26 Mbps over standard 2-Wire unconditioned copper lines. The unit
simultaneously supports Ethernet, NX64 serial transmissions and T1/E1 PBX traffic
in a single platform.
The Ethernet port is a 10 Base-T port. The PBX port operates at a 1.544Mbps or
2.048Mbps fixed rate or may be disabled if not in use for bandwidth allocation.
The NX64 serial port supports either RS-422/449, RS-530, X.21, V.35, RS-232,TTL
and HSSI through individual interface modules. Multiple data rates and timing
sources are selectable.
The VDSL-MUX supports downline loading and storage of system configurations.
The diagnostic capabilities include local analog loop, local digital loop and
remote digital loop. Configuration is accomplished via an Async RS-232 Port.
Setup procedures are menu driven and all parameters are stored in memory that
supports power outages.
The VDSL-MUX has a one year return to factory warranty. The unit operates on
110/220 volt AC.
|
SPECIFICATIONS
| Application |
Point-to-Point high bandwidth
Limited Distance Modem that supports LAN, NX64 Serial
data and T1 or E1 |
| Capacity |
One:
2-Wire Interface
One: 10 Base-T Port
One: NX-64 Serial Port
One: DSX-1 Port or E1 Port |
Line
Interface |
2-Wire
Full Duplex
VDSL Line Encoding |
LAN
Interface |
10
Base-T with RJ-48c
Through-Put: Full 10mbps |
T1/E1
Port (PBX) |
Input:
0 to -7.5 dB
Clock Rate: 1.544 or 2.048Mbps fixed rate or disable
Connector: RJ-48C |
Serial
Data Port |
Data
Rate: NX64 selectable, 64K to 6.144 mbps
Interface Options: RS-422/449, RS-530, X.21, V.35, RS-232 and HSSI
HSSI Rates: 64K to 28.416 mbps |
Driving
Distance and Rates |
Dependent on data rate and wire
gauge
Symmetrical Operation
4M @ 6,200 ft
6M @ 5,500 ft
13M @ 4,000 ft
26M @ 2,300 ft
Distances are based on 26AWG Cable,
Ambient Noise; 6dB Margin |
Line
Requirements |
2-Wire
private, unconditioned copper wire |
Surge
Protection |
2-Wire
interface and power supply |
| Power
Source |
100-120
to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220
volt select switch, IEC Power Inlet, (2) 5mm Fuses |
Environmental |
Operating
Temperature....32º to 122º F (0º to 50º C)
Relative Humidity.............5 to 95% Non-Condensing
Altitude............................0 to 10,000 feet |
Dimensions |
Height
....... 1.75 inches (4.44 cm)
Width ........ 7.90 inches (20.07 cm)
Length ....... 9.00 inches (22.86 cm) |
Weight |
2
pounds (0.914Kg) |
| Warranty |
One
Year, Return To Factory |
Approvals |
Emissions:
CE Approved
Safety: CE Approved |
| Ordering
Information |
Part
#: 151000
Model:VDSL-MUX
Description: Base Unit, Network Extender, Digital
Limited Distance Modem |
Available
Interfaces |
| Part #: |
|
| 151015 |
T1 (DSX-1) I/M |
| 151023 |
E1, Coax I/M |
| 151024 |
E1, Twisted I/M |
| 151016 |
10Base-T I/M |
| 151028 |
HSSI I/M |
| 129014 |
RS-232 DCE I/M |
| 129010 |
V.35 DCE I/M |
| 129011 |
RS-530 DCE I/M |
| 129012 |
RS-422/449 DCE
I/M |
| 129013 |
X.21 DCE I/M |
| 129057 |
TTL I/M |
|
Included
with each unit: |
1) Operations Manual
2) U.S.A. grounded Power Cord, Part # 71315 |
|
|