Fiber Interfaces repeater for standardized fieldbus protocols.
Fieldbuses transmit relatively small amounts of data over large distances quickly and reliably. However, as a result of various legacy systems, there is a wide diversity of protocols and standards in use all over the world. The table below will help in narrowing your selection to find the right high-quality optical fiber cable modules for your systems.
Electrical/optical Interface converters for
- PROFIBUS field bus networks
- Genius fieldbus networks
- Modbus Plus fieldbus networks
- RS 485 fieldbus networks
Seamless integration with process control systems using signal strength outputs
Fault signaling with built-in relay for an independent alarm line
Variants for singlemode, multimode and plastic fiber
Ring suitable repeater supporting all kinds of LWL. Profibus DP and FMS including automatically adjustment all data rates. Ring redundancy with 0 ms ring configuration time in the event of a network fault. Ex-approvals for Zone 2 according to ATEX (RL94/9/EG), FM and NEPSI, Zone 1 Approvals according to ATEX (RL94/9/EG). There are self-sustaining variants (no power supply needed) as well available.
Ring suitable repeater for multimode and singlemode fiber. Ring redundancy with 0 ms reconfiguration time. Ex-approvals for Zone 2 according to ATEX (RL94/9/EG) and Class 1, Div. 2 according to cUL1604
Ring suitable repeater for multimode and singlemode fiber. Suitable for RS485-based Bus protocols, e.g. Modbus. Ex approvals for Zone 2 according to ATEX (RL94/9/EG) and Class 1, Div. 2 according to cUL1604.