North American GPI Series B Power Conditioners

ABC500-91BUI Part # 97042-02 ABC1000-91BUI Part # 97083-02 ABC1500-91BUI Part 97125-02 ABC2000-91BUI Part # 97166-02 ABC3000-91BUI Part # 97250-02 VA Ratings 500 1000 1500 2000 3000 Frequency 50/60 Hz. 50/60 Hz. 50/60 Hz. 50/60 Hz. 50/60 Hz. BTU/Hr. Output 85 137 205 273 410 T.H.D Max. % <1% <1% <1% <1% <1% Load Surge Current @ 1/2 cycle 100 amps 162 amps 195 amps 225 amps 330 amps 1 second 48 amps 78 amps 92 amps 108 amps 160 amps 10 seconds 14 amps 23 amps 27 amps 32 amps 55 amps Input Voltage Selectable 100/120/208/240 Selectable 100/120/208/240 Selectable 100/120/208/240 Selectable 100/120/208/240 Selectable 100/120/208/240 Output Voltage 120 120 120 120 120 Output Current 4.2 amps 8.3 amps 12.5 amps 16.7 amps 25.0 amps Efficiency 95% 96% 96% 96% 96% Voltage Drop No Load to Full Load 7.2% 5.2% 4.4% 4% 3% Safety Agency Listing Shipping Weight (lbs.) 15 25 55 60 80

Noise Rejection-Isolation: With unit under power and an ANSI/IEEE C62.41Cat. A pulse applied either normal or common mode at the input, the noise output voltage will be less than 10V normal mode and less than 0.5V common mode in all four quadrants (CM-NM, NM-NM, CM-CM, NM-CM).
Surge Voltage withstand Capability: Tested under power to ANSI/IEEE C62.41 Cat. A & B (formerly IEEE587-1980). Cat. A - 6000V @ 200 amps, 0.5 µsec risetime, 100 kHZ decay, Cat. B - 6000V @ 500 amps, 0.5 µsec risetime, 100 kHZ decay.

IMPORTANT PRODUCT NOTE
The POWERVAR GPI Series B power conditioner is engineered to allow the system designer to build the power conditioner into the electronic system as a front end component to system power supplies and controls. The GPI Series B power conditioner is a UL Recognized Component that has also been tested and found to meet the relevant requirements of medical standard UL2601 (IEC60601). The GPI Series B power conditioner has an input voltage that is programmable via a multi-terminal strip. One of four input voltages may be selected. It is the responsibility of the system designer to match the GPI Series B power conditioner to an input circuit breaker of an appropriate rating for the selected input voltage. User guide SM503 contains input current specifications for each available input voltage as well as suggested breaker ratings and breaker manufacturers.

Outline and Mounting Dimensions
Model ABC500-91BUI	Model ABC1000-91BUI