North American Uninterruptible Power Managers
“A” Case Enclosure

Front Panel Controls • Power On/Off • Test • On Line • On Battery LED Additional Model Specific Information Ground Guard® Models: Ground Guard models have all the same technical and performance specifications of the standard POWERVAR UPM models. Ground Guard models are equipped with POWERVAR’s patented ground conditioning technology. Ground Guard models prevent the occurrence of ground loops in networked or interconnected system applications. Ground Guard models can be used in lieu dedicated electrical circuits with isolated ground wiring. Rear Panel Information and Controls • 6 foot power cord with NEMA 5-15P plug • Two (2) NEMA 5-15R receptacles • Communications Manager DB9 port • Circuit Breaker • AC Inlet Module • Site Wiring Fault LED Internal Batteries • User hot-swappable (see instruction manual) • Type - 12 volt, 4.5 amp-hour • Quantity - 2 pieces • Recharge time - 6 hours Environmental • Temperature - 0 - +40° C (32 - 104°F) Operating - 20 - +60° C (-40 - +140° F) Shipment, Storage • Humidity - 5 - 90% non-condensing (Operating, Shipment, Storage) • Altitude - 3,000m (10,000 ft.) max. (Operating, Shipment, Storage)

Noise Rejection-Isolation: With unit under power and an ANSI/IEEE C62.41Cat. A pulse applied either normal or common mode at the input, the noise output voltage will be less than 10V normal mode and less than 0.5V common mode in all four quadrants (CM-NM, NM-NM, CM-CM, NM-CM).
Surge Voltage Withstand Capability: Tested under power to ANSI/IEEE C62.41 Cat. A & B (formerly IEEE587-1980). Cat. A - 6000V @ 200 amps, 0.5 µsec risetime, 100 kHZ decay, Cat. B - 6000V @ 500 amps, 0.5 µsec risetime, 100 kHZ decay.