Bomara Associates Logo Bomara Associates Homepage

Eaton Authorized Power Specialist

Powerware 9125 Powerpass

Features

 

  • Replace or upgrade the UPS without powering down your equipment
  • Surge protection in the absence of the UPS electronics module during maintenance
  • Individual load segment switched maximize back up time for critical devices
  • Protects laser printer against power surges without overloading the UPS (not available on 2000 VA, 120V models)
  • Designed to line up with the Powerware 9125

The Powerware 9125 PowerPass is designed to enhance the reliability and flexibility of the Powerware 9125. The PowerPass enables you to upgrade or replace the UPS while continuously providing power to your protected equipment. The PowerPass also provides surge protection for the critical loads if your UPS is not present and provides surge protection for your laser printer without taxing the UPS. The PowerPass also works in conjunction with Eaton's power management software to allow orderly shutdown and startup of individual load segments. This enables you to keep key pieces of equipment running, and power down non-critical equipment to save UPS battery power. The PowerPass features six receptacles plus a laser receptacle on 1500 VA and below models and connects directly to the back of the UPS. It works with both the tower and rack mount configurations of the Powerware 9125.

Model 120V 120V 240V
Part Number 05146520-001 05146519-002 0514519-002
Capacity (VA) 700 - 150 2000 700 - 2000
Nominal Input Voltage 120V, 16A 120V, 16A 240V
Operating Frequency 50/60 Hz 50/60 Hz 50/60 Hz
Dimensions (WxDxH) 11.0” x 4.5” x 3.5” (27.9 x 11.4 x 8.9cm) 11.0” x 4.5” x 3.5” (27.9 x 11.4 x 8.9cm) 11.0” x 4.5” x 3.5” (27.9 x 11.4 x 8.9cm)
Weight

2.5 lb (1.1 kg)

2.5 lb (1.1 kg) 2.5 lb (1.1 kg)
Surge Suppression

180V MOVs across input L and N;
100 joule, 6500A peak current rating
320V MOVs each across L to G and N to G;
160 joule; 6500A peak current rating

180V MOVs across input L and N;
100 joule, 6500A peak current rating
320V MOVs each across L to G and N to G;
160 joule; 6500A peak current rating
320V MOVs across input L1 and L2;
160 joule, 6500A peak current rating
Electrostatic Discharge Withstands 25 kV Withstands 25 kV Withstands 25 kV
Input Connection to PowerPass 5-15R mates with UPS
5-15P power cord

5-20R mates with UPS
5-20P power cord

IEC-320 plug mates with UPS IEC-320 receptacle
Input Connection to UPS

(6) 5-15R; (1) 5-15R
for laser printer
(unprotected)

(6) 5-15R (6) IEC 320-C13;
(1) IEC 320-C13 for laser printer
(unprotected)
Output Receptacles (2) 5-15P connect to
UPS AC output
(2) 5-15P connect to
UPS AC output
2) IEC 320-C13 plugs connect to
UPS AC output
UPS AC Output to PowerPass (Plug) (2) 5-15P connect to
UPS AC output
(2) 5-15P connect to
UPS AC output
(2) IEC 320-C13 plugs connect to
UPS AC output
Agency Approvals UL 1778; CSA C22.2 No. 107.1;
ANSI/IEEE C62.41-1991, NEMKO
UL 1778; CSA C22.2 No. 107.1;
ANSI/IEEE C62.41-1991, NEMKO
UL 1778; CSA C22.2 No. 107.1;
IEC 950 and EN50091-1
Environmental      
Operating Temperature 0 to 40ºC (32 to 104°F) 0 to 40ºC (32 to 104°F) 0 to 40ºC (32 to 104°F)
Storage Temperature -20 to 60ºC (-4 to 140°F) -20 to 60ºC (-4 to 140°F) -20 to 60ºC (-4 to 140°F)
Relative Humidity 5-96% non-condensing 5-96% non-condensing 5-96% non-condensing


Powerware Home
Bomara Homepage
Request Information

Bomara Associates Phone: 800.5BOMARA (800.526.6272) Phone: 978.452.2299 Fax: 978.452.1169 3 Courthouse Lane, Chelmsford, MA 01824 USA
email: bobr@bomara.com      web: www.bomara.com
Serving the marketplace for over 35 years