Input
Input for rectifier	380/220V: 400/230V or 415/240V
Input for bypass	380/220V: 400/230V or 415/240V
Voltage range	294/170V - 478/276V
Frequency	50/60 Hz
Power Factor	0.96
Efficiency	94% (online) 99% (Efficiency optimizer™)
Output
Voltage	380/220V: 400/230V or 415/240V ±1% field selectable
Frequency	50/60 Hz ±0.5 ±1.0 or ±2.0 Hz selectable synchronized to mains ±0.005 Hz free running, slew rate 1Hz/sec.
Dynamic response	±5% at 100% load change response time 1ms to steady state
Voltage disortion	<2% THD on linear load <5% THD on nonlinear load
Overload capacity	150% 30 sec. on inverter
Battery
Type	Sealed lead-acid batteries
Back-up time	typical 7-18 min at full load
Recharge time	<5 hr up to 90% capacity
Battery management	ABM™ Technology (Advanced Battery Management™)
Battery Test	DC Expert™
Control Features
User interface	Monitoring panel with LEDs: UPS on, Line on, Battery operation Bypassed, Overload, Over temperature, Service required Load bar and Audible alarm
Remote interface	2 pcs RS232 ports - one with modem interface Voltage free relays: Line failure, Low battery, Bypass and Alarm Emergency power off - input, Building alarm signal - inputs
Environmental
Temperature	0-40°C, recommended 15-25°C
Humidity	5-90% RH non-condensing
Ventilation	Fan cooling, temperature µP monitored
Audible noise	<50dB(A) at 1 metre
Safety	EN50091-1
EMC	EN50091-2 (IEC801)
Protection class	IP20S
Weight (kg)	PWPM7.5 175/215* PWPM10 175/215* PWPM15 215
Dimensions WxDxH (mm)	400x750x700
Software
	-LanSafe v.5 with Cross Platform shutdown -PowerVision monitoring compatible -PowerCare&REG -Sentinel - FORS (Full Online Remote Service) compatible
Options
	-External Battery Cabinets -10 year batteries -Remote Status Panel -Isolation transformer -LanQuattro -Alarm Extension Unit -ConnectUPS SNMP adapter -External LCD Panel

Battery Run Times
With various computer loads Powerware Prime 7.5 - 15 kVA models. Standard batteries 48 pcs in series

NOTE: The UPS includes internal battery