Powerware Home » Surge Protection » PSPV Series

 Eaton's PSPV Series:
For mounting external to electrical distribution equipment

PSPV 050 400D 2 K<br />Surge Rating<br />
050 = 50 kA/ phase<br />080 = 80 kA/ phase<br />100 = 100 kA/ phase<br />120 = 120  kA/ phase<br />160 = 160 kA/ phase<br />200 = 200 kA/ phase<br />
Voltage Code: See table below<br />Encloser: K = NEMA 1<br />Display: 2 = Standard  (LED/audible alarm)

Features:

  • SurgePlane™ technology to ensure reliability and performance by using a low impedance copper platform
  • Compact design to enable close mounting to electrical distribution equipment
  • Parallel hybrid filter technology
  • Individually fused surge suppression components
  • Status indicator lights to monitor supply power, surge suppression component status and fusing
  • Can be remotely monitored using Form C contacts
  • Audible alarm
  • Ideal for critical sub-panels and remote power panels
  • 50 through 200 kA surge current capacity ratings
  • Contains no replaceable parts or items that require periodic maintenance
  • 10-year warranty

Discontinued – Please Contact Bomara Associates to help with finding a suitable replacement

Description:


Eaton's PSPV Series sidemount surge protective devices

Eaton's PSPV series is a commercial grade and light industrial surge protective device (SPD) that combines surge suppression components and EMI/RFI filtering, providing effective protection for sensitive electronic loads.

Surges (also known as transients) due to lightning, utility grid switching, switching of external/ internal inductive or capacitive loads, and other sources travel on power line conductors throughout the electrical distribution system, causing system operating problems and equipment downtime.

Use of the PSPV units can prevent these costly occurrences and equipment damage. Available with six surge current capacity ratings, the PSPV can be installed on the main of light commercial buildings, on any subpanel in a facility and in any control panel to protect sensitive electronic equipment


 


Applications:


The increasing necessity for facility-wide surge protection

The ever-increasing use of microprocessors and other sensitive electronic equipment has increased the necessity for facility-wide surge protection. These sensitive electronic components are used within man pieces of equipment, including computers, programmable logic controllers, and other commonly used electrical and electronic equipment. Surges can wreak havoc on equipment, causing catastrophic failures, process interruptions and premature aging leading to failure. The application of SPDs can mitigate problems with sensitive electronic equipment, keeping the equipment and the related processes up and running reliably without disruption or damage due to surge-related events.

In addition to externally generated surge events, such as lightning and grid switching, equipment is also susceptible to damage by internally generated surges. In fact, the majority of surges are generated internally by commonly used items, such as fluorescent lighting ballasts, light dimmers, photocopiers, fax machines and variable frequency drives. This further reinforces the necessity for facility-wide surge protection applied at all stages of the electrical distribution system, from the electrical service entrance down to the single phase loads.


specifications:


Description PSPV050 PSPV080 PSPV100 PSPV120 PSPV160 PSPV200
Surge current per phase
50 kA
80 kA
100 kA
120 kA
160 kA
200 kA
Surge current per mode
25 kA
40 kA
50 kA
60 kA
80 kA
100 kA
Nominal surge current (In) *
20 kA
20 kA
20 kA
20 kA
20 kA
20 kA
Filter attenuation (MIL-STD-220A at 100 kHz)
0–40 dB
0–40 dB
0–40 dB
0–40 dB
0–40 dB
0–40 dB
Circuit
Surge-
Surge-
Surge-
Surge-
Surge-
Surge-
construction
Plane
Plane
Plane
Plane
Plane
Plane
UL 1449  3rd
Edition Listed
Yes
Yes
Yes
Yes
Yes
Yes
UL 1283  Listed
Yes
Yes
Yes
Yes
Yes
Yes
cUL Listed
Yes
Yes
Yes
Yes
Yes
Yes
NEMA 1
           
Enclosure
Standard
Standard
Standard
Standard
Standard
Standard
* - 208Y, 240S, 240D, 400Y and 480Y units rated 10 kA In


Physical specifications:

Description Specification
Operating temp range –40°C to +60°C
Altitude < 13,000 ft (4000m)
Dimensions 5.00 x 11.55 x 2.60 inches (127.0 x 293.4 x 66.0 mm)
Weight 3.5 lbs (1.6 kg)

PSPV ordering guidelines:


PSPV050400D2K<br />Surge Rating<br />
050 = 50 kA/ phase<br />080 = 80 kA/ phase<br />100 = 100 kA/ phase<br />120 = 120  kA/ phase<br />160 = 160 kA/ phase<br />200 = 200 kA/ phase<br />
Voltage Code: See table below<br />Encloser: K = NEMA 1<br />Display: 2 = Standard  (LED/audible alarm)

Voltage Code

Nominal Voltages (Use These Codes to Complete the Model Number)

120/208

240V

230/400
499V*
277/480
480V
120/240 single/split-phase (3W plus G) 240S    
Three-phase wye (4W plus G)
208Y 400Y 480Y
Three-phase delta (3W plus G) 240D 400D 480D
* Contact Bomara for other configurations: Applicable for 220/380 and 240/415 system voltages.

PSPV dimensions in inches (mm)—NEMA 1:




Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized