Evolution

High density protection for network devices

• 650 / 3,000VA (1/2U)
• Line Interactive
• Software Incl.
• 1U rack only @ 1,550VA
• 2 Load segments
• USB and RS232 ports

Protection for 1 to 15 servers.

Maximum Availability

• Powershare - The Evolution output sockets are individually controlled to provide load-shedding to maximize the backup time and provide remote reboot and sequential start-up as standard.

• Continuous power supply - Hot swappable batteries. The HotSwap MBP (Maintenance
  By-Pass) module allows the UPS to be replaced without interrupting the power supply.

• Long backup times - 1 to 4 EXB battery units can be added to the Evolution S (from 1,250 to 3,000).

Minimum total cost of ownership (TCO)

• Line-interactive HF technology: the best price/performance ratio.
• No additional cost: rack 1U and RT models are provided with the rail kits.
• Remote supervision: A wide range of options using the Solution-Pac supplied: SNMP and HTML and relay outputs.

Flexibility : Evolution has unmatched Flexibility.

• Format: Evolution is available in tower format, rack 1U format, RT2U convertible rack/tower version (optimized for rack mounting) or RT3U (for tower or short-depth racks).

• Connections: With FlexPDU and HotSwap MBP the Evolution can be connected by sockets. They can be installed as required behind, on the side or on top of the unit.

• Compatible with high power factor loads: The Evolution S are rated for 0.9 total power factor (1250 VA/1150 W, 1750 VA/1600 W, 2500 VA/2250 W and 2880 VA/2700 W)

• Interfaces: USB + serial + remote start/stop + slot for optional communications card.

Features and Specifications

Part Numbers