Powerware 9 Prestige UPS - Powerware (Eaton)

200 - 240 VAC
Electrical
Input Voltage	200, 208, 220, 230, 240 VAC Nominal
Allowable Range	176-276 VAC without batteries
Input Frequency	45-65 Hz
Input Power Factor	.90 Typical at full load and nominal use
Surge Protection	per EN50082-1 tested to IEC 801-4, IEEE587
Output Voltage	200, 208, 220, 230, 240 VAC +/- 3% (user-selectable)
Output Ratings	3000 VA / 2100 W
Output Current	15A / 200VAC 14.4A / 208VAC 13.6A / 220VAC 13A / 230VAC 12.5A / 240VAC
Output Voltage THD	<3% Linear load, <5% Non-linear load
Load Crest Ratio	3:1
Common Mode Noise Rejection	>60 dB
Transverse Mode Noise Rejection	>80 dB
Physical
UPS weight with standard battery	54.5 kg / 120 lbs.
UPS Dimensions	177mm H x 432mm W x 610mm D 6.97"h x 17"w x 24"d
Battery
Battery Type	Sealed, lead-acid/maintenance free
Full Load Support Time	7 minutes (2 battery trays)
Recharge time	4 hours to 90% capacity (2 battery trays)
Diagnostics	Automatic on-line test without exposing load
General
Architecture	On-line, double-conversion, powerline isolated
User Interface	5 segment LED display with meters and alarms
Operation	Fully automatic, touch-pad control
Diagnostics	Full system self test on power up
UPS Bypass	Automatic on overload or UPS failure
Battery Servicing	Hot pluggable battery trays (2 trays standard with unit)
Communications	RS-232, LAN contacts, AS/400, Novell, 3Com, Banyan
Networks	Connectivity via Ethernet & Token Ring SNMP Adapter
Input	Detachable 2 meter (6') line cord with region-specific plug
Output	(1) IEC 320, 16A receptacle and (1) IEC 320, 10A receptacle
Safety	UL 1778, CSA-C22.2 No. 107.1, CE Certification
Environmental and safety
Audible Noise	<50 dBA typical
Ambient Operating Temperature	+10C to +40C
Ambient Storage Temperature	-20C to +60C
Relative Humidity	5-95%, non-condensing
Altitude	4000 feet with derating
EMI Suppression	FCC Part 15, Subpart J Class A, CISPR A
Packaging	No CFC's, Recyclable

Rack-mount details

Rack-mount battery run times (in minutes)