Pulsar MX

EATON MX UPS
Pulsar series
(this product was formerly known as the Pulsar MX UPS)

Online double-conversion UPS (5000 VA, upgradeable to 20,000 VA)
A unique, true online double-conversion product family designed to let you pay-as-you-grow with high-density power protection. Can be used for 20 to 110 servers, ideal for
departmental networks, servers and workstations.
• Two front access hot-swappable sub-modules (power and battery)
for maintenance without load interruption
• Automatic battery test (test period can be set)
• Internal bypass built-in to supply the load even if the UPS fails
• Large input voltage and frequency ranges to avoid using the batteries unnecessarily

Configurations and ordering part numbers:

High performance UPS upgradeable from 5 kVA to 20 kVA.

• 5 / 20 kVA (3/16U)
• True On Line
• 0.9 PF
• Modular UPS
• Hot Swappable Modules
• 2 Load segments
• USB and RS232 ports

Can be used for 20 to 110 servers, ideal for: departmental networks, servers and workstations.

• Continuous power supplies
• Minimum total cost of ownership
• Flexible

Continuous power supply

• Two front access hot-swappables sub-modules (power and battery) for maintenance without load
  interruption.

• Automatic battery test (test period can be set).

• Internal bypass built-in to supply the load even if the UPS fails.

• Large input voltage and frequency ranges to avoid using the batteries unnecessarily..

Flexible

• Can be used as a free-standing tower unit or 19" rack-mounted: only 3U for Pulsar MX 4000 and 5000, 16U for Pulsar MX Frame

• LCD multilingual display with mimic and LEDs for rapid view of the UPS status, diagnostics and event log
  
  
• Outputs: IEC 10A and 16A outlet sockets and hardwired outputs
  
  
• Built-in Powershare system for remote reboot of the equipment connected, sequential start-up or load shedding while operating from battery to maintain the power to critical loads.
  
  
• Pulsar MX Frame is compatible with three phase or single phase supplies.
  
  
• Backup time : 10 mins up to 2 hours by adding 3U battery extension modules.
  

Minimum total cost of ownership (TCO)

• More power with an output power factor of 0.9.
  
  
• When the power supply needs to be upgraded, the Pulsar MX 4000 and 5000 can be paralleled to provide 8 kVA or 10 kVA using the ModularEasy kit: without extra cost on the initial purchase.

• Pulsar MX Frame is a modular system with 5 kVA sub-modules paralleled to provide up to 20 kVA or 15 kVA with redundancy.

1: At 70% load. 2: Economy mode, 91% in normal mode. 3: At 70% nominal rating with power factor 0.7 typical values after 3 charge/discharge cycles, with 3-5 year old batteries. Weekly battery test without interrupting the load (daily or monthly if required). EXB compatible with 0.8 power factor loads. 4: Solution-Pac CDROM supplied as standard. 5: 50 dbA above 5 kVA. 7: 87415 = 87021 (empty Pulsar MX Frame) + (3) 87100 + (3) 87101. 8: 87420 = 87021 (empty Pulsar MX Frame) + (4) 87100 + (4) 87101