« Back to BladeUPS Series

 Eaton ZP23115XXXXX100:


Bomara offers technical sales, service & support for the BladeUPS Series.

Topology Double-conversion on demand
Configuration Preassembled in S-Series Rack
Part Number ZP23115XXXXX100
Color Black
Cable Entry Bottom
Available U Space 24U
Rack Doors Front - One piece locking mesh door
Rear - Split locking mesh doors
UPS Bypass Automatic on overload or UPS failure, In rack manual maintenance bypass for power off of modules service (3 breaker)
Dimensions (H x W x D, inches) 81.0 x 24.0 x 42.0
Dimensions (H x W x D, mm) 2058 x 610 x 1067
Weight (lbs) 737
Warranty One-year standard warranty
(Ships with the following items)
(1) S-Series Rack on a heavy-duty shipping pallet with unloading ramp BladeUPS parallel bar and wireway
(1) BladeUPS modules installed in rack
Intelligent Power Software CD
BladeUPS Installation and User manual
Rack hardware kit
Front and rear rack aesthetic plates
Installed (1) Maintenance Bypass Module

Electrical Input
(1) hardwired-MBM
Input Voltage Range 180 to 265V
Nominal Voltage 208V
Frequency 50 or 60 Hz auto-detecting
Operating Frequency 50 or 60 Hz, ±5 Hz (Auto detect)
Input Power Factor >0.95 with IT loads (Load dependent in HE mode)
Input Current Distortion <5% with IT loads (Load dependent in HE mode)
Generator Compatability Fast sync slew rate for optimum generator operation.
Electrical Output
Power Rating (Watts) 12 kW
Nominal Voltage 208Y/120V, 3/4 wire
Output voltage regulation 180 to 228 Vac, Ph to Ph
Output Receptacles
(1) hardwired-MBM
Output Configuration Three-phase, four wire + ground
Overload Capacity 105% continuous
110% for 10 minutes 125% for 1 minute
Power Factor Lagging: 0.7 Leading: 0.9
Frequency Regulation 0.1 Hz free-running
Optional Extended Battery Module BladeUPS 3U EBM - 103005747-6591 (SKU)
Battery Management Advanced Battery Management (ABM)
Battery Type 5AH (internal), 9AH (optional EBM external), sealed, lead-acid, maintenance-free - VRLA (40 internal batteries per 12 kW module)
Battery Replacement Alarm notified, user replaceable, hot swappable
Battery Test Automatic battery test standard (remote scheduling capable) Manual battery test from front display.
Battery Cut-off Voltage Variable from 1.67 VPC at <5 min. runtime to 1.75 VPC at >90min. Runtime.
Battery Load Share Yes, based on battery voltage during discharge. Load shifted to systems with the strongest batteries to give longest runtime for battery condition.
Extended Battery Capability Yes, add up to four additional 3U battery enclosures >34 min. at 100% load. > 1 hour at 50% load.
Charger ABM Technology. Advanced three-stage charging technique
User Interface Multi-language backlit graphical LCD
Configuration Changes User capable, firmware auto configures. Online firmware updates available for operational changes.
LEDs (4) LEDs for notice and alarm
Audible Alarms Yes
Dry Contacts Two user configurable inputs. One user configurable output.
Communication Ports (1) RS-232, (1) REPO
Connectivity Card None included
Communications Slot (1) available communication slot
Power Management Software Eaton Intelligent Power Software Suite CD (included)
Environmental & Standards
RoHS Compliance Complies per EU Directive 2002/95/EC Category 3 (4 of 5)
Heat Dissipation (BTU) <371W/1266 BTU/hr. at 100% rated load.
Audible Noise <60 dBA at 1 meter, (Fans at low speed)
Operating Temperature 0ºC (32ºF) to +40ºC (105ºF); Batteries recommended max. +25ºC (77ºF)
Safety markings UL1778, UL6950, cUL
EMC Markings FCC Part15 Class A
Markings UL, cUL
Storage Temperature -25ºC (-13ºF) to +55ºC (131ºF) without batteries; -5ºC (23ºF) to +40ºC (104ºF) with batteries (Do not store >25ºC for prolonged period)
Relative Humidity 41 – 95%, non-condensing
Altitude ≤ 1000 m at +40C (105F)

Call Us: 1-978-452-2299
First Name:
Last Name:
Mail Stop:
State (if in US):
Province/Region (if outside US):
ZIP (Postal) Code:
Verification: Please type:
Please have a Bomara Associates representative contact me

View Full Site View Mobile Optimized