Basic PDU (Power Distribution Units):

OR

LPC115-2-AF: EPDU, Desktop, BA, 5-15P, 5-15R Outputs

LPC115-2A-LT: LPC 115-2A but with a local latch.

LPC115-2FA-LT: Latching LPC 115-2A-LT but with low cost filter board added.

LPC115-3362: LPC115-4-A with (1) 5-15 GFI Duplex and a 25' power cord.

LPC115-4-A: 120VAC/ 15A Input and output, 9' Cable (14/3) terminated with a NEMA 5-15P

LPC120: This has 4 5-15R duplexes, each protected by a 15amp resettable breaker.

LPC120P: EPDU TABLE TOP L5-30P 8-5-15R BA

LPC1224-1P: Basic EPDU L14-30P, (12) 5-15R

LPC2675: EPDU 0U MIL PLUG 10 5-15R CUSTOM

LPC2676: MIL STD plug and power cord. Single Phase power PDU distribution box with (10) 5-15 plugs.

LPC208-1P: Single Phase power PDU distribution box with L6-30P cord to (4) L6-30R Receptacles.

LPC208-2P:Single Phase power PDU distribution box with L6-30P cord to (1) L6-30R and (3) L6-20R Receptacles.

LPC2872-1: EPDU, Desktop, BA, C20, C13 Outputs

PC2715: EPDU HORIZONTAL 2U L6-30P 4 L6-30R BA. 2 PDU's in a 2U rack space.

PC2778: Horizontal 2U 2 3TB (2) 5-15R IG (8) 5-15R BA. Single Phase 3 position terminal block input PDU

PC2912: Horizontal 2U 1 L6-30P 2 L6-30R BA. L6-30P to two L6-30R in a 2U rack with filtering.

PC2912-3388: One L6-30P input to one L6-30R and one L6-20R output with breaker.

PC3325:EPDU HORIZONTAL 2U BW 6 3P TB BA

PC3881: Custom Single Phase EPDU

PW101 Series: PW101 Vertical Mount Basic ePDU

T17: High Current Single and Three Phase T17 Series

T8-A: 1 Phase 1U Rack Mount Basic PDU

T8S: 1 Phase 1U Rack Mount Basic PDU

T9092: 1 Phase 1U Rack Mount Basic PDU

TPC12: 1 Phase 1U Rack Mount Basic PDU

TPC2104: 120 or 240V / 16 via Separate Cable with C20, (16) C13

TPC2105: 1 Phase 1U Rack Mount Basic PDU

TPC2806: EPDU 1U MIL 6 5-15 Custom

TPC2806-3747:  TPC2806 but with a 2 pin connector on the rear.

TPC2831: 110V-125V 12A Single Phase with 5-15P, (4) 5-15R, (8) IEC 60320 C13

TPC2887-3121: EPDU 1U C20 IN 8 C13 Custom

TPC3225: EPDU 2U HW CUSTOM

TPC3270: EPDU HORIZTONAL 1U 5-20P 10 5-20R BA

TPC3465-3590: TPC3465 with 10A breakers

TPC52xx Series: T982C1-N-LL-009 & T982F1-F-LL-009 with a 44" long input

TPC8 Series:

TPC884-1: EPDU HorizontalL 1U C20 10 C13 BA

TPC981 Series: TPC981 1-Phase Basic Horizontal ePDU

VPC2769, VPC1917 & VPC3735: 1 Phase 0U Vertical Mount Basic PDU

LPC120-3807: 3-Phase 120/208VAC 50/60HZ 30A per phase via a 6' power cord with L21-30 plug.

LPC208-3529: 3 Phase power PDU distribution box with L21-30P cord to (4) L21-30R Receptacles.

PC1941-2192: L21-30P inlet and (2) L21-30R outlets on rear panel. Breaker on front panel with light.

PC1941-2205: PC1941 but with the addition of one 5-15 duplex on the front panel.

PC1941-2740: L21-30P inlet, (2) NEMA L5-30R, (2) L5-20R. No filter or MOVS.

PC1941-2766: 3 Phase box with L21-20P and L21-30P inputs and (2) 5-15R and (2) L21-30R Receptacles.

PC1941-5004: EPDU 2U 2XL21-30P 2XL21-30R 2 5-15R with cords custom

PC1941-5005: EPDU 2U L21-30P L21-30R 2 5-15R with cords custom

PC2122: EPDU Horizontal L21-30 12 5-20R BA

PC2583: 20/208, 20A 400Hz., output via one MIL Bendix LJT2314 or compatible.

PC2646: 3 Phase 2U Rack Mount Basic PDU

PC3038-3074: PC3038 but with a 30A CB instead of 20A CB and a single L5-30R replaces the 5-20R duplex

PC3114: EPDU Horizontal 3U HBL 26522 INLET 17 5-15R BA

PC3171: EPDU Horizontal 2U HBL3521C-P L22-20R 16 C13 BA

PC3364: EPDU 2U L21-30P MULTIPLIET OUTLETS CUSTOM

PC3365: 3 Phase 2U Rack Mount Basic PDU

PC3365-3414: 120/208V / 24 via 10/5, 15' Cable with L21-30P, (24) C13

PC3865: EPDU Custom

TPC3459: Replaced with the T17 Series 

TPC3583: T17C19230-4-009 with a HBL45115 plug and 9 foot 10/5 SO type power cable

TPC4100: 3 Phase 1U Rack Mount Basic PDU