Pulizzi IPC34XX Series

Single Phase North American and International use 120 V, 240 V, 15amp, 20amp, 30amp Input Individual outlet control via Computer, Modem, or LAN

Features	Benefits
Local On/Off control of each outlet through Ethernet, Serial, Modem, or local buttons on the unit.	Individual control of outlets lets you operate your equipment with out affecting other equipment attached to the same PDU.
Connect up to 10 IPC units together for the ability to control up to 80 outlets with a single serial or Ethernet connection.	Save time, money and recourses by using only 1 line or IP address to manage up to 80 outlets. The RJ485 serial connection between units allows distances of up to 1000 feet!
Voltage range of 100-240VAC via a C20 inlet and C13 outlets. (IPC3401 and IPC3401-NET)	This will allow you to use simple universal designs for equipment that can be used in any country!
Connect via Telnet, Web browser interface, Serial, or Modem (with external modem connect to serial port.)	Many interfaces allow you to use this unit in many ways as well as providing back up methods incase of other equipment failure.
IPC units designed with EMI/RFI Filtering, TVSS (spike/ surge suppression), and UL listed circuit breakers	Units are designed with the latest safety requirements, provide clean power, and of the highest quality to make certain your equipment stays up and running saving you time and money.

Specifications

CHASSIS

1.75” (1U) x Depth 9.5” x Width 19.0”
Weighs approximately 19lbs
16 GA. Steel, Painted Black,

RACK MOUNTED

EIA standard for 19” racks
Hole spacing to IEC 297
Adjustable mounting to front or rear panel
Optional vertical or under counter mounting brackets 001-1928-1 (2 required)

NEMA or IEC 320 OUTLETS

IPC 3401 has 8 IEC60320 Type C13 (computer style) outlets
IPC 3402 and IPC3402-2930 have 8 NEMA 5-15R outlets
IPC 3402-A2 has 8 NEMA 5-20R outlets
IPC3402-2756 has 4 NEMA 5- 15R and 4 NEMA 5-20R

11 INDICATOR LIGHTS

Power available to system-CB “on”
Power “on” to outlets 1-8
Data acquisition
Remote Disable

REMOTE or LOCAL CONTROL

Serial RS232 port (DB9 Male) for direct or modem connection
RS485 input/output ports for strapping up to 10 systems together over a CAT.5 cable
Local: one on/off switch for each outlet
Ethernet connection to your local area network (-NET models only).

BAUD RATE

Default: Fixed 9600 baud

AVS (AUTO-VOLTAGE SELECTABLE)

The IPC3401-NET is auto-voltage sensing for operation 100-250 VAC input/output

EMI/RFI FILTERING

Common Mode - Line to Ground
Differential Mode - Line to Line
Filtered inlet isolates noise before entering the system

SPIKE/SURGE SUPPRESSION

Line to Neutral (Line to Line when used at 200-240VAC) LISTED OVERLOAD CIRCUIT

BREAKER PROTECTION

Listed Main Disconnect Breaker, with a long time delay curve, which provides both manual on/off switching and open (trip) automatically with an overload condition
Circuit Breaker (Kick) Guard’s are provided

POWER INPUT

IEC60320 Type C20 EMI/RFI Filtered Inlet with optional retaining clip or cable tray.
Optional power cable assemblies are available – see below

OUTLET STATUS

Query the IPC for Outlet and Watch Dog status, i.e. outlets are “on” or “off”

STRAPPING

Strapping allows up to 10 IPC’s (80 outlets) to be controlled at one address.
Units are connected together via the RS485 serial buss for distances up to 1000’.

REMOTE DISABLE

With the push of a button, disable remote access to the IPC when needed

PATENTED MULTIPLE TIME DELAY (MTD)

Sequence power up and power down to outlets with a four second time delay (factory set)
User Programmable:
Set power “on” sequence to any combination of outlets
Set the MTD timing from 1 second to 999 seconds, i.e. 009 = 9 seconds

ADDRESSING

The IPC comes with a default address but you can also create your own with any four alphanumeric characters
Strapping allows for connection of up to 10 units at one address

AUTO-EVENT COMMAND RESPONSE

The IPC will automatically update the status of it’s outlets (“on” or “off”)

SOFTWARE CONTROL

Multi-platform support
Control via Terminal Emulation Software such as PCAnywhere, Hyper Terminal, VT100, and many others.
Simple command structures allows for easy programming of scripts or batch programs.
Easy to use Web Browser interface.

OUTLET NAMING

Give each outlet its own individual 8 character name.

Specifications

Model Number:	IPC3401	IPC3401-NET	IPC3402	IPC3402-NET	IPC3402-A2	IPC3402-A2-NET	IPC3402-2756	IPC3402-2930
Voltage 50/60Hz	120V~ or 240V~	120V~ or 240V~	120V~	120V~	120V~	120V~	120V~	120V~
Current Input	20A @ 120V~ 16A @ 240V~	20A @ 120V~ 16A @ 240V~	20A	20A	20A	20A	30A	30A
Current Output	16A	16A	16A	16A	16A	16A	24A	24A
Full Load V/A	1920VA @ 120V 3840VA @ 240V	1920VA @ 120V 3840VA @ 240V	1920VA	1920VA	1920VA	1920VA	2880VA	2880VA
Ethernet Card	NO	YES	NO	YES	NO	YES	YES	YES
Outlets	IEC C13	IEC C13	NEMA 5-15R	NEMA 5-15R	NEMA 5-20R	NEMA 5-20R	(4) 5-20R & (4) 5-15R	NEMA 5-15R
Circuit Breaker	20/20A	20/20A	20A	20A	20A	20A	20A/10A	15A/15A
EMI/RFI Filter	20A	20A	20A	20A	20A	20A	NO	NO
TVSS	YES	YES	YES	YES	YES	YES	YES	YES
Power cable / Inlet	C20 Inlet	C20 Inlet	C20 Inlet	C20 Inlet	C20 Inlet	C20 Inlet	10' Cable	10' Cable
Cable/plug	Not Included	Not Included	Not Included	Not Included	Not Included	Not Included	L5-30P	L5-30P

Part Number	IEC Jumper Cable (from IPC3401 to “computer” style inlet)
010-0025	C13 to C14: 8’ LENGTH JUMPER CABLE
010-0027	C13 to C14: 6’ LENGTH JUMPER CABLE
010-0028	C13 to C14: 4’ LENGTH JUMPER CABLE
010-0029	C13 to C14: 2’ LENGTH JUMPER CABLE

Part Number	Power Cable Description (C19 end connects to IPC34xx)
010-9334	C19, 8', 14/3 SJT, NEMA 5-15P (125V, 15A) STRAIGHT
010-9335	C19, 8', 12/3 SJT, NEMA 5-20P (125V, 20A) STRAIGHT
010-9336	C19, 8', 14/3 SJT, NEMA 6-15P (250V, 15A) STRAIGHT
010-9337	C19, 8', 12/3 SJT, NEMA 6-20P (250V, 20A) STRAIGHT
010-9338	C19, 8', 14/3 SJT, NEMA L5-15P (125V, 15A) TWISTLOCK
010-9339	C19, 8', 12/3 SJT, NEMA L5-20P (125V, 20A) TWISTLOCK
010-9340	C19, 8', 14/3 SJT, NEMA L6-15P (250V, 15A) TWISTLOCK
010-9341	C19, 8', 12/3 SJT, NEMA L6-20P (250V, 20A) TWISTLOCK
010-9342	C19, 8', 12/3 SJT, C20 MALE (20 AMP)
010-9343	C19, 2.5m, 1.5mm/3 HAR, CEE7-7 (250V, 16A) EUROPEAN
010-9344	C19, 2.5m, 1.5mm/3 HAR, BS546A (250V, 15A) BRITISH
010-9345	C19, 2.5m, 1.5mm/3 HAR, AS/NZS 3112 (250V, 15A) AUSTRALIAN
010-9346	C19, 2.5m, 1.5mm/3 HAR, SI32 (250V, 16A) ISRAELI
010-9347	C19, 2.5m, 1.5mm/3 HAR, CEI23-16 (250V, 16A) ITALIAN

COMMAND STRUCTURE: UPPER CASE ONLY, FOLLOWED BY “Enter”, “Carriage Return” or “Line Feed”.
NOTE: The lower case “xx” or “n” in command code represents: xx=outlet number 01-80 and n= the unit number 0-9.

8 BIT ASCII	DESCRIPTION
A1n	Turn all outlets ON
A0n	Turn all outlets OFF
Nxx	Turn ON any outlet
Fxx	Turn OFF any outlet
S1n	Sequence all outlets in unit “n” ON with preset delays (factory set at 4s)
S0n	Sequence all outlets in unit “n” OFF with preset delays (factory set at 4s)
ADn	Enter new IPC user name (4 characters)
ISn	Set Power up/down sequence. IPC will ask for (P) Preset or (D) Default? (D) = Previous setting and (P) = Enter new
DXn	Display outlet status ON or OFF, Watchdog and Remote Status
AEn	Auto status update enabled YES / NO
WE0	Watchdog enabled for unit “0” only
WT0	Watchdog timeout set for unit “0” only
WD0	Watchdog disabled for unit “0” only
PWn	Enter user password (3 characters)
PDn	Password disabled
SR0	Outlet 1 in unit 0 will automatically reboot in 5s
LO	Logout
CNnx	Set outlet x name on unit n up to eight charters.
DNn	Display outlet status with names, Watchdog and Remote Status
?	Display Command menu

MOV Specifications
Continuous AC Voltage	270VAC
Continuous DC Voltage	360VDC
Maximum DC Leakage	200μA
Low Varistor Voltage Limit	389VDC
High Varistor Voltage Limit	453VDC
Nominal Varistor Voltage	424VDC
Current For Varistor Voltage	1mA
Maximum Clamp Voltage 8x20μs	680V
Maximum Clamp Voltage Test Current	100A
Peak Current Rating (1 Pulse) 8x20μs	10000A
Peak Current Rating (2 Pulse) 8x20μs	6500A
Energy Rating (10x100μs)	325J
Energy Rating (8x20μs)	325.00J
Capacitance 970	pF
Impulse Response Time	50ns