CHASSIS
- 1.75” (1U)H x 9.5”D x 19.0”W
- Weighs approximately 19lbs
- Black steel
- Adjustable mounting to front, rear, or
center. Optional vertical brackets
available.
NEMA or IEC 320 OUTLETS
- IPC 3601 has 8 IEC60320 Type C13
(computer style) outlets
- IPC 3602 has 8 NEMA 5-15R ( 3
prong) outlets
12 INDICATOR LIGHTS
- Main power system on
- Power “on” to outlets 1-8
- 2 Data and Ethernet link
POWER INPUT
- IEC60320 Type C20 Inlet
- Mating power cables must be ordered
separately.
- The IPC3601 is auto-voltage sensing
for operation 100-240V input/output
EMI/RFI FILTERING
- Common Mode - Line to Ground
- Differential Mode - Line to Line
- Filtered inlet isolates noise before
entering the system
SPIKE/SURGE SUPPRESSION
- Line to Neutral (or Line)
|
OVERLOAD PROTECTION
- Push button circuit breaker pops out
when an overload occurs.
SERIAL/ETHERNET
- Serial RS232 via RJ22 connector on
the rear. Six foot RJ22 to DB9 cable
included.
- Serial baud rate is 9600 default or
38,400 maximum
- Ethernet (10/100) network via RJ45
connector on the rear. Six foot
network cable included
- Network setup allows DHCP or any
public/private address
SOFTWARE INTERFACES
- Web interface provides a graphic
control interface through a web
browser (IE, Netscape, Mozilla)
- Telnet interface provides a text menu
control interface with any terminal emulation software
- SNMP allows read/write capability
with trapping
- E-mail notification system provides email
alerts or logs showing user
activity
- Serial interface provides a text menu
control interface with any terminal
emulation software
- FTP utility allows firmware upgrades
|
SOFTWARE SECURITY
- Web interface uses HTTP 1.1 (64 bit
encrypted) Digest Authentification
- Username/password security
- Settings allow the administrator to
disable unused interfaces
SOFTWARE FEATURES
- Administrator and multiple users can
be configured
- User level access can be limited to
specific outlets
- Unit and outlet naming
- Outlet groups can be created to
perform an action on multiple outlets
- Outlet control includes, individual,
group and all outlet global control
- Outlet actions include, on/off and
reboot
- Sequence allows all the outlets to be
sequenced up/down in a preset
sequence, max 999 sec.
- Outlet reboot allows an outlet to be
turned off/on at a preset time up to
999 seconds.
• E-mail notification allows up to two email
addresses to receive
notifications of alerts or events
AUTO-EVENT SCHEDULING-
Administrator can configure on or off
events for outlets or groups. The
event occurs at the preset time daily
or weekly.
|